相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing
M. F. Arif et al.
COMPOSITES PART B-ENGINEERING (2020)
Fabrication of ultra-light nickel/graphene composite foam with 3D interpenetrating network for high-performance electromagnetic interference shielding
Qiongzhen Liu et al.
COMPOSITES PART B-ENGINEERING (2020)
Liquid crystalline 3D printing for superstrong graphene microlattices with high density
Fang Wang et al.
CARBON (2020)
Comparative Studies on Polyurethane Composites Filled with Polyaniline and Graphene for DLP-Type 3D Printing
Hyeonseo Joo et al.
POLYMERS (2020)
Exfoliated graphene/thermoplastic elastomer nanocomposites with improved wear properties for 3D printing
Hyerin Jeon et al.
COMPOSITES PART B-ENGINEERING (2020)
Solvent crystallization-induced porous polyurethane/graphene composite foams for pressure sensing
Chunfang Feng et al.
COMPOSITES PART B-ENGINEERING (2020)
3D printing of Fe3O4 functionalized graphene-polymer (FGP) microarchitectures
Muhammad Wajahat et al.
CARBON (2020)
A new method for preparation of functionalized graphene and its epoxy nanocomposites
Mohannad Naeem et al.
COMPOSITES PART B-ENGINEERING (2020)
Smartdust 3D-Printed Graphene-Based Al/Ga Robots for Photocatalytic Degradation of Explosives
Bahareh Khezri et al.
SMALL (2020)
Development of multifunctional nanocomposites with 3-D printing additive manufacturing and low graphene loading
Brennan E. Yamamoto et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)
Influence of layered nanofillers on the mechanical properties and thermal degradation of polyacrylicester polymer: Theoretical and experimental investigations
Tuhin Saha et al.
COMPOSITES PART B-ENGINEERING (2019)
Rheological and electrical behaviour of nanocarbon/poly(lactic) acid for 3D printing applications
Giovanni Spinelli et al.
COMPOSITES PART B-ENGINEERING (2019)
Water dispersible magnetite graphene oxide anchored sulfonic acid hybrid for mechanical enhancement of waterborne epoxy nanocomposites
Duraisami Dhamodharan et al.
COMPOSITES PART B-ENGINEERING (2019)
Evaluation of the Compatibility of Organosolv Lignin-Graphene Nanoplatelets with Photo-Curable Polyurethane in Stereolithography 3D Printing
Fathirrahman Ibrahim et al.
POLYMERS (2019)
3D Printing of Covalent Functionalized Graphene Oxide Nanocomposite via Stereolithography
Jerome O. Palaganas et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
3D printing to enable multifunctionality in polymer-based composites: A review
D. G. Bekas et al.
COMPOSITES PART B-ENGINEERING (2019)
Digital light processing 3D printing of graphene/carbonyl iron/polymethyl methacrylate nanocomposites for efficient microwave absorption
Yuxin Zuo et al.
COMPOSITES PART B-ENGINEERING (2019)
Direct Ink Writing of Cement Structures Modified with Nanoscale Additive
Seyed Mohammad Sajadi et al.
ADVANCED ENGINEERING MATERIALS (2019)
In situ generated MWCNT-FeF3•0.33 H2O nanocomposites toward stable performance cathode material for lithium ion batteries
Nasr Bensalah et al.
EMERGENT MATERIALS (2019)
Ink-based 3D printing technologies for graphene-based materials: a review
Jingfeng Wang et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Architecture-inspired paradigm for 3D bioprinting of vessel-like structures using extrudable carboxylated agarose hydrogels
Aurelien Forget et al.
EMERGENT MATERIALS (2019)
Photopolymerization in 3D Printing
Ali Bagheri et al.
ACS APPLIED POLYMER MATERIALS (2019)
Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear-resistant hierarchical nanocomposites
Jenniffer Bustillos et al.
POLYMER COMPOSITES (2018)
High-Performance and Lightweight Thermal Management Devices by 3D Printing and Assembly of Continuous Carbon Nanotube Sheets
Nam Nguyen et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Recent Advances on 3D Printing Technique for Thermal-Related Applications
Nam Nguyen et al.
ADVANCED ENGINEERING MATERIALS (2018)
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Yanqiu Jiang et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures
Yang Yang et al.
ADVANCED MATERIALS (2018)
A primary study into graphene/polyether ether ketone (PEEK) nanocomposite for laser sintering
Binling Chen et al.
APPLIED SURFACE SCIENCE (2018)
Surface modification of carbon fibre using graphene-related materials for multifunctional composites
Pui-yan Hung et al.
COMPOSITES PART B-ENGINEERING (2018)
Fabricating graphene-titanium composites by laser sintering PVA bonding graphene titanium coating: Microstructure and mechanical properties
Zengrong Hu et al.
COMPOSITES PART B-ENGINEERING (2018)
Graphene-based materials and their composites: A review on production, applications and product limitations
Velram Balaji Mohan et al.
COMPOSITES PART B-ENGINEERING (2018)
Direct ink writing of highly bioactive glasses
Amy Nommeots-Nomm et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Fabrication of Conducting Polyacrylate Resin Solution with Polyaniline Nanofiber and Graphene for Conductive 3D Printing Application
Hoseong Han et al.
POLYMERS (2018)
Progress in 3D Printing of Carbon Materials for Energy-Related Applications
Kun Fu et al.
ADVANCED MATERIALS (2017)
Multi and mixed 3D-printing of graphene-hydroxyapatite hybrid materials for complex tissue engineering
Adam E. Jakus et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling
K. Prashantha et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2017)
Direct Printing of Thermal Management Device Using Low-Cost Composite Ink
Nam Nguyen et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating
Charles B. Sweeney et al.
SCIENCE ADVANCES (2017)
Graphene Oxide: An All-in-One Processing Additive for 3D Printing
Esther Garcia-Tunon et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
Study of graphene oxide-based 3D printable composites: Effect of the in situ reduction
Annalisa Chiappone et al.
COMPOSITES PART B-ENGINEERING (2017)
Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
Amir Azhari et al.
CARBON (2017)
Powder bed binder jet 3D printing of Inconel 718: Densification, microstructural evolution and challenges
Peeyush Nandwana et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide
Jing Zhong et al.
CARBON (2017)
Mechanical reinforcement of graphene/poly(vinyl chloride) composites prepared by combining the in-situ suspension polymerization and melt-mixing methods
Han Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Temperature dependent mechanical properties of graphene reinforced polymer nanocomposites - A molecular dynamics simulation
Feng Lin et al.
COMPOSITES PART B-ENGINEERING (2017)
3D Printing Biocompatible Polyurethane/Poly(lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties
Qiyi Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
Rouhollah D. Farahani et al.
ADVANCED MATERIALS (2016)
Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
Kun Fu et al.
ADVANCED MATERIALS (2016)
Reduced graphene oxide filled poly(dimethyl siloxane) based transparent stretchable, and touch-responsive sensors
Deepalekshmi Ponnamma et al.
APPLIED PHYSICS LETTERS (2016)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Mesoscale design of multifunctional 3D graphene networks
Peter C. Sherrell et al.
MATERIALS TODAY (2016)
3D nanostructured inkjet printed graphene via UV-pulsed laser irradiation enables paper-based electronics and electrochemical devices
Suprem R. Das et al.
NANOSCALE (2016)
Fabrication of light, flexible and multifunctional graphene nanoribbon fibers via a 3D solution printing method
Mingqiang Wang et al.
NANOTECHNOLOGY (2016)
Laser-assisted direct ink writing of planar and 3D metal architectures
Mark A. Skylar-Scott et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
3D Printing of Graphene Aerogels
Qiangqiang Zhang et al.
SMALL (2016)
Fabrication of highly conductive graphene flexible circuits by 3D printing
Di Zhang et al.
SYNTHETIC METALS (2016)
3D-printed bioceramic scaffolds with a Fe3O4/graphene oxide nanocomposite interface for hyperthermia therapy of bone tumor cells
Yongliang Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties
Amir Mostafaei et al.
MATERIALS & DESIGN (2016)
Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate
Tiina Vuorinen et al.
SCIENTIFIC REPORTS (2016)
Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide
Huijun Li et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2016)
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
Adam E. Jakus et al.
ACS NANO (2015)
Printing in Three Dimensions with Graphene
Esther Garcia-Tunon et al.
ADVANCED MATERIALS (2015)
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
Giovanni Postiglione et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Processability of PEEK, a new polymer for High Temperature Laser Sintering (HT-LS)
S. Berretta et al.
EUROPEAN POLYMER JOURNAL (2015)
The role of SEBS in tailoring the interface between the polymer matrix and exfoliated graphene nanoplatelets in hybrid composites
Jyotishkumar Parameswaranpillai et al.
MATERIALS CHEMISTRY AND PHYSICS (2015)
3D stereolithography printing of graphene oxide reinforced complex architectures
Dong Lin et al.
NANOTECHNOLOGY (2015)
3D Printable Graphene Composite
Xiaojun Wei et al.
SCIENTIFIC REPORTS (2015)
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
D. M. Kirchmajer et al.
JOURNAL OF MATERIALS CHEMISTRY B (2015)
3D Printing of Reduced Graphene Oxide Nanowires
Jung Hyun Kim et al.
ADVANCED MATERIALS (2015)
Additive Manufacturing of Graphene-Hydroxyapatite Nanocomposite Structures
Amir Azhari et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2015)
Rapid Fabrication of Designable Large-Scale Aligned Graphene Nanoribbons by Electro-hydrodynamic Nanowire Lithography
Wentao Xu et al.
ADVANCED MATERIALS (2014)
Design and preparation of graphene/poly(ether ether ketone) composites with excellent electrical conductivity
Lilong Yang et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Mechanical and thermal stability of graphene and graphene-based materials
A. E. Galashev et al.
PHYSICS-USPEKHI (2014)
Graphene-polymer nanocomposites for structural and functional applications
Kesong Hu et al.
PROGRESS IN POLYMER SCIENCE (2014)
Evolution from graphite to graphene elastomer composites
Kishor Kumar Sadasivuni et al.
PROGRESS IN POLYMER SCIENCE (2014)
Graphene oxide dispersions: tuning rheology to enable fabrication
Sina Naficy et al.
MATERIALS HORIZONS (2014)
Facile Access to Large-Scale, Self-Assembled, Nacre-Inspired, High-Performance Materials with Tunable Nanoscale Periodicities
Paramita Das et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Organic Solvent-Based Graphene Oxide Liquid Crystals: A Facile Route toward the Next Generation of Self-Assembled Layer-by-Layer Multifunctional 3D Architectures
Rouhollah Jalili et al.
ACS NANO (2013)
Ultralight and Highly Compressible Graphene Aerogels
Han Hu et al.
ADVANCED MATERIALS (2013)
Developing Polymer Composite Materials: Carbon Nanotubes or Graphene?
Xuemei Sun et al.
ADVANCED MATERIALS (2013)
Ultra-Robust Graphene Oxide-Silk Fibroin Nanocomposite Membranes
Kesong Hu et al.
ADVANCED MATERIALS (2013)
Bio-Inspired Two-Dimensional Nanofluidic Generators Based on a Layered Graphene Hydrogel Membrane
Wei Guo et al.
ADVANCED MATERIALS (2013)
Multifunctional, Ultra-Flyweight, Synergistically Assembled Carbon Aerogels
Haiyan Sun et al.
ADVANCED MATERIALS (2013)
Janus Micelles as Effective Supracolloidal Dispersants for Carbon Nanotubes
Andre H. Groeschel et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
Ultratough Artificial Nacre Based on Conjugated Cross-linked Graphene Oxide
Qunfeng Cheng et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
High performance graphene- and MWCNTs-based PS/PPO composites obtained via organic solvent dispersion
Marcos Ghislandi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Process optimization for PA12/MWCNT nanocomposite manufacturing by selective laser sintering
R. A. Paggi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Inkjet printed acrylic formulations based on UV-reduced graphene oxide nanocomposites
R. Giardi et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
Strong Light-Matter Interactions in Heterostructures of Atomically Thin Films
L. Britnell et al.
SCIENCE (2013)
Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage
Maher F. El-Kady et al.
NATURE COMMUNICATIONS (2013)
Interrelated shape memory and Payne effect in polyurethane/graphene oxide nanocomposites
Deepalekshmi Ponnamma et al.
RSC ADVANCES (2013)
From Nanographene and Graphene Nanoribbons to Graphene Sheets: Chemical Synthesis
Long Chen et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)
Thermal conductivity of composites with hybrid carbon nanotubes and graphene nanoplatelets
Ke Chu et al.
APPLIED PHYSICS LETTERS (2012)
Additive-free hydrogelation of graphene oxide by ultrasonication
Owen C. Compton et al.
CARBON (2012)
Reinforcement and interphase of polymer/graphene oxide nanocomposites
Chaoying Wan et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Biodegradable nanocomposites of amyloid fibrils and graphene with shape-memory and enzyme-sensing properties
Chaoxu Li et al.
NATURE NANOTECHNOLOGY (2012)
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Simon J. Leigh et al.
PLOS ONE (2012)
In-situ graphene oxide reduction during UV-photopolymerization of graphene oxide/acrylic resins mixtures
P. Fabbri et al.
POLYMER (2012)
Graphene-based wireless bacteria detection on tooth enamel
Manu S. Mannoor et al.
NATURE COMMUNICATIONS (2012)
Optical and Sensing Properties of 1-Pyrenecarboxylic Acid-Functionalized Graphene Films Laminated on Polydimethylsiloxane Membranes
Xiaohong An et al.
ACS NANO (2011)
Fabrication of Superstrong Ultrathin Free-Standing Single-Walled Carbon Nanotube Films via a Wet Process
Zhun Shi et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Interphases in Graphene Polymer-based Nanocomposites: Achievements and Challenges
Mauricio Terrones et al.
ADVANCED MATERIALS (2011)
In situ preparation of functionalized graphene oxide/epoxy nanocomposites with effective reinforcements
Chenlu Bao et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Controlling electrical percolation in multicomponent carbon nanotube dispersions
Andriy V. Kyrylyuk et al.
NATURE NANOTECHNOLOGY (2011)
Dramatic Increase in Fatigue Life in Hierarchical Graphene Composites
F. Yavari et al.
ACS APPLIED MATERIALS & INTERFACES (2010)
All-Organic Vapor Sensor Using Inkjet-Printed Reduced Graphene Oxide
Vineet Dua et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)
Constructing hierarchically structured interphases for strong and tough epoxy nanocomposites by amine-rich graphene surfaces
Ming Fang et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Multiparameter Structural Optimization of Single-Walled Carbon Nanotube Composites: Toward Record Strength, Stiffness, and Toughness
Bong Sup Shim et al.
ACS NANO (2009)
A Graphene Hybrid Material Covalently Functionalized with Porphyrin: Synthesis and Optical Limiting Property
Yanfei Xu et al.
ADVANCED MATERIALS (2009)
Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology
Hideto Saijo et al.
JOURNAL OF ARTIFICIAL ORGANS (2009)
Chemically Induced Mobility Gaps in Graphene Nanoribbons: A Route for Upscaling Device Performances
Blanca Biel et al.
NANO LETTERS (2009)
Large-scale pattern growth of graphene films for stretchable transparent electrodes
Keun Soo Kim et al.
NATURE (2009)
Engineering of multifunctional gels integrating highly efficient growth factor delivery with endothelial cell transplantation
Steven M. Jay et al.
FASEB JOURNAL (2008)
Raman spectra of graphite oxide and functionalized graphene sheets
Konstantin N. Kudin et al.
NANO LETTERS (2008)
Functionalized graphene sheets for polymer nanocomposites
T. Ramanathan et al.
NATURE NANOTECHNOLOGY (2008)
Measurement of the elastic properties and intrinsic strength of monolayer graphene
Changgu Lee et al.
SCIENCE (2008)
Thermal and mechanical properties of a poly(ε-caprolactone)/graphite oxide composite
Weihua Kai et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Ultrastrong and stiff layered polymer nanocomposites
Paul Podsiadlo et al.
SCIENCE (2007)
Mechanical properties of robust ultrathin silk fibroin films
Chaoyang Jiang et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Counterintuitive effect of molecular strength and role of molecular rigidity on mechanical properties of layer-by-layer assembled nanocomposites
Paul Podsiadlo et al.
NANO LETTERS (2007)
Graphene-based composite materials
Sasha Stankovich et al.
NATURE (2006)
Silver nanowire layer-by-layer films as substrates for surface-enhanced Raman scattering
RF Aroca et al.
ANALYTICAL CHEMISTRY (2005)
Structure and properties of silk hydrogels
UJ Kim et al.
BIOMACROMOLECULES (2004)
Nanomechanical probing of layered nanoscale polymer films with atomic force microscopy
A Kovalev et al.
JOURNAL OF MATERIALS RESEARCH (2004)
Block copolymers as a tool for nanomaterial fabrication
M Lazzari et al.
ADVANCED MATERIALS (2003)
Molecular design of strong single-wall carbon nanotube/polyelectrolyte multilayer composites
AA Mamedov et al.
NATURE MATERIALS (2002)
Estimates of the ab initio limit for π-π interactions:: The benzene dimer
MO Sinnokrot et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2002)
Layer-by-layer assembly of rectifying junctions in and on metal nanowires
NI Kovtyukhova et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2001)
Free-standing layer-by-layer assembled films of magnetite nanoparticles
AA Mamedov et al.
LANGMUIR (2000)