相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Characterization and finite element modeling of coupled properties during polymer composites forming processes
Hassan Alshahrani
MECHANICS OF MATERIALS (2020)
Concurrent design and manufacture of a thermoplastic composite stiffener
Daniel Peeters et al.
COMPOSITE STRUCTURES (2019)
Coupled meso-macro simulation of woven fabric local deformation during draping
Akira Iwata et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Fast processing and continuous simulation of automotive structural composite components
Frank Henning et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Measuring yarn deformations induced by the manufacturing process of woven composites
Arturo Mendoza et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
A machine learning assisted approach for textile formability assessment and design improvement of composite components
Clemens Zimmerling et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Multi-scale modeling of mechanical behavior of cured woven textile composites accounting for the influence of yarn angle variation
Biao Liang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Prediction of the mechanical behavior of fiber-reinforced composite structure considering its shear angle distribution generated during thermo-compression molding process
Dug-Joong Kim et al.
COMPOSITE STRUCTURES (2019)
A coupled thermomechanical approach for finite element forming simulation of continuously fiber-reinforced semi-crystalline thermoplastics
Dominik Doerr et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Consolidation Modeling during Thermoforming of Thermoplastic Composite Prepregs
Hu Xiong et al.
MATERIALS (2019)
Experimental and numerical analysis of wrinkling during forming of multilayered textile composites
E. Guzman-Maldonado et al.
COMPOSITE STRUCTURES (2019)
Thermoplastic prepreg with partially polymerized matrix: Material and process development for efficient part manufacturing
Jung Hwan Shin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Influence of tension-shear coupling on draping of plain weave fabrics
Yuan Yao et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Characterization of temperature-dependent tensile and flexural rigidities of a cross-ply thermoplastic lamina with implementation into a forming model
Lisa M. Dangora et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2018)
Thermostamping of [0/90]n carbon/peek laminates: Influence of support configuration and demolding temperature on part consolidation
Abdelhaq Benkaddour et al.
POLYMER COMPOSITES (2018)
A lamination model for forming simulation of woven fabric reinforced thermoplastic prepregs
Youkun Gong et al.
COMPOSITE STRUCTURES (2018)
Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components
Luise Kaerger et al.
COMPOSITE STRUCTURES (2018)
Identifying the distinct shear wrinkling behavior of woven composite preforms under bias extension and picture frame tests
A. Hosseini et al.
COMPOSITE STRUCTURES (2018)
Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics
Dominik Doerr et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Draping simulation of carbon/epoxy plain weave fabrics with non-orthogonal constitutive model and material behavior analysis of the cured structure
Min-Gu Han et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Numerical forming of continuous fibre reinforced composite material: A review
Philippe Bussetta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations
P. Boisse et al.
COMPOSITES PART B-ENGINEERING (2018)
Consolidation-Driven Defect Generation in Thick Composite Parts
J. P. -H. Belnoue et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
A Review on the Mechanical Modeling of Composite Manufacturing Processes
Ismet Baran et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2017)
The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review
P. Boisse et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2017)
Heat transfer analysis at high cooling rate on the surface of thermoplastic parts
Baptiste Pignon et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Effect of Cooling Rate on the Mechanical Strength of Carbon Fiber-Reinforced Thermoplastic Sheets in Press Forming
D. Tatsuno et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
An Anisotropic Hyperelastic Constitutive Model with Tension-Shear Coupling for Woven Composite Reinforcements
Youkun Gong et al.
INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2017)
Thermo-Thermo-mechanical characterization of a thermoplastic composite and prediction of the residual stresses and lamina curvature during cooling
Mael Peron et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Automated Stamp Forming of Continuous Fiber Reinforced Thermoplastics for Complex Shell Geometries
Bernd-Arno Behrens et al.
1ST CIRP CONFERENCE ON COMPOSITE MATERIALS PARTS MANUFACTURING (CIRP CCMPM 2017) (2017)
Hybrid bicomponent fibres for thermoplastic composite preforms
Christoph Schneeberger et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Understanding different types of coupling in mechanical behavior of woven fabric reinforcements: A critical review and analysis
M. Haghi Kashani et al.
COMPOSITE STRUCTURES (2017)
Viscoelastic bending model for continuous fiber-reinforced thermoplastic composites in melt
U. Sachs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Active forming manipulation of composite reinforcements for the suppression of forming defects
Farbod Nosrat Nezami et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
A new test method for the characterization of the bending behavior of textile prepregs
Hassan Alshahrani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites - Part II
Steffen Ropers et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
A thermo-viscoelastic model of process-induced residual stresses in composite structures with considering thermal dependence
Anxin Ding et al.
COMPOSITE STRUCTURES (2016)
Analysis of a two-way tension-shear coupling in woven fabrics under combined loading tests: Global to local transformation of non-orthogonal normalized forces and displacements
M. Haghi Kashani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites
Steffen Ropers et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Analysis of the thermomechanical shear behaviour of woven-reinforced thermoplastic-matrix composites during forming
Martin Machado et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A rate-dependent non-orthogonal constitutive model for describing shear behaviour of woven reinforced thermoplastic composites
Martin Machado et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
About the thermomechanical behaviour of a carbon fibre reinforced high-temperature thermoplastic composite
Xavier Gabrion et al.
COMPOSITES PART B-ENGINEERING (2016)
An anisotropic hyperelastic constitutive model for thermoplastic woven composite prepregs
Youkun Gong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
A novel hyper-viscoelastic model for consolidation of toughened prepregs under processing conditions
J. P. -H. Belnoue et al.
MECHANICS OF MATERIALS (2016)
Simulation of thermoplastic prepreg thermoforming based on a visco-hyperelastic model and a thermal homogenization
E. Guzman-Maldonado et al.
MATERIALS & DESIGN (2016)
Development and validation of a CAE chain for unidirectional fibre reinforced composite components
Luise Kaerger et al.
COMPOSITE STRUCTURES (2015)
3D composite reinforcement meso FE analyses based on X-ray computed tomography
N. Naouar et al.
COMPOSITE STRUCTURES (2015)
Thermomechanical analysis, modelling and simulation of the forming of pre-impregnated thermoplastics composites
E. Guzman-Maldonado et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints
S. Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Influence of process parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone laminate
Hugues Lessard et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Continuum and discrete models for structures including (quasi-) inextensible elasticae with a view to the design and modeling of composite reinforcements
M. V. d'Agostino et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
A new PvT device for high performance thermoplastics: Heat transfer analysis and crystallization kinetics identification
Baptiste Pignon et al.
POLYMER TESTING (2015)
Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark results
U. Sachs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Characterisation of the shear-tension coupling of carbon-fibre fabric under controlled membrane tensions for precise simulative predictions of industrial preforming processes
Farbod Nosrat-Nezami et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations
Biao Liang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Formability analyses of uni-directional and textile reinforced thermoplastics
S. P. Haanappel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Draping of plain woven carbon fabrics over a double-curvature mold
Hongling Yin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Thermomechanical analysis of thermoplastic composite prepregs using bias-extension test
Peng Wang et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2014)
Modeling the onset of shear boundary layers in fibrous composite reinforcements by second-gradient theory
Manuel Ferretti et al.
ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK (2014)
Experimental and computational composite textile reinforcement forming: A review
Thomas Gereke et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Press forming a 0/90 cross-ply advanced thermoplastic composite using the double-dome benchmark geometry
P. Harrison et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
A new mechanism for the formation of ply wrinkles due to shear between plies
James S. Lightfoot et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
About the influence of stamping on thermoplastic-based composites for aeronautical applications
B. Vieille et al.
COMPOSITES PART B-ENGINEERING (2013)
Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix
Peng Wang et al.
COMPOSITES PART B-ENGINEERING (2013)
Autoclave cure simulation of composite structures applying implicit and explicit FE techniques
Gasser F. Abdelal et al.
INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN (2013)
A new PvT device for the thermoplastics characterization in extreme thermal conditions
Xavier Tardif et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
Characterising the shear-tension coupling and wrinkling behaviour of woven engineering fabrics
P. Harrison et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
A lubrication approach to friction in thermoplastic composites forming processes
R. H. W. ten Thije et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Hyperelastic modelling for mesoscopic analyses of composite reinforcements
A. Charmetant et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses
P. Boisse et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Design, performance and analysis of thermal lag of the UFS1 twin-calorimeter chip for fast scanning calorimetry using the Mettler-Toledo Flash DSC 1
Sander van Herwaarden et al.
THERMOCHIMICA ACTA (2011)
The Flash DSC 1, a power compensation twin-type, chip-based fast scanning calorimeter (FSC): First findings on polymers
Vincent Mathot et al.
THERMOCHIMICA ACTA (2011)
MULTI-SCALE EFFECTS IN THE CONSOLIDATION OF THERMOPLASTIC LAMINATES
W. J. B. Grouve et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
Processing of fibre reinforced thermoplastic composites
U. K. Vaidya et al.
INTERNATIONAL MATERIALS REVIEWS (2008)
How to determine the parameters of polymer crystallization for modeling the injection-molding process ?
S. A. E. Boyer et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
A friction model for thermostamping commingled glass-polypropylene woven fabrics
Jennifer L. Gorczyca-Cole et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Residual stresses in thermoplastic composites - A study of the literature - Part I: Formation of residual stresses
Patricia P. Parlevliet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics
XQ Peng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Recommendations for designers and researchers resulting from the world-wide failure exercise
PD Soden et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Thermal and thermooxidative degradation of engineering thermoplastics and life estimation
YN Gupta et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Prediction of shape distortions Part I. FE-implementation of a path dependent constitutive model
JM Svanberg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Modeling/simulating the injection molding of isotactic polypropylene
CA Hieber
POLYMER ENGINEERING AND SCIENCE (2002)
Modelling of composite sheet forming: a review
TC Lim et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Elastic stiffness analysis of a thermo-formed plain-weave fabric composite - part III: experimental verification
J Hofstee et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
A dual homogenization and finite element approach for material characterization of textile composites
XQ Peng et al.
COMPOSITES PART B-ENGINEERING (2002)
The study of tapered laminated composite structures: a review
K He et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
分享论文
