相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Filler materials in composite out-of-plane joints - A review
Zsombor Sapi et al.
COMPOSITE STRUCTURES (2019)
Defect detection of composite adhesive joints using electrical resistance method
So-Jung Baek et al.
COMPOSITE STRUCTURES (2019)
Synergistic mode II delamination toughening of composites using multi scale carbon-based reinforcements
Anil R. Ravindran et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Synergistic delamination toughening of composites using multi-scale carbon reinforcements
Anil R. Ravindran et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical and electrical properties of graphene and carbon nanotube reinforced epoxy adhesives: Experimental and numerical analysis
Sensen Han et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Hierarchical mode I and mode II interlaminar toughening of Z-pinned composites using 1D and 2D carbon nanofillers
Anil R. Ravindran et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Fracture and fatigue behaviour of carbon fibre composites with nanoparticle-sized fibres
Shang-Nan Tsai et al.
COMPOSITE STRUCTURES (2019)
Liquid metal synthesis of two-dimensional aluminium oxide platelets to reinforce epoxy composites
Anil R. Ravindran et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Fracture and toughening mechanisms of silica- and core-shell rubber-toughened epoxy at ambient and low temperature
Wing Lam Tsang et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Function-driven engineering of 1D carbon nanotubes and 0D carbon dots: mechanism, properties and applications
Quan Xu et al.
NANOSCALE (2019)
Fatigue behavior of composite to aluminum single lap joints reinforced with graphene doped nylon 66 nanofibers
Safa Polat et al.
COMPOSITE STRUCTURES (2018)
Mechanical properties and strain monitoring of glass-epoxy composites with graphene-coated fibers
Haroon Mahmood et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
The electric field alignment of short carbon fibres to enhance the toughness of epoxy composites
Anil R. Ravindran et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Synergetic effects of thin plies and aligned carbon nanotube interlaminar reinforcement in composite laminates
Estelle Kalfon-Cohen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Fracture and fatigue behaviour of epoxy nanocomposites containing 1-D and 2-D nanoscale carbon fillers
Raj B. Ladani et al.
ENGINEERING FRACTURE MECHANICS (2018)
Multi-scale toughening of epoxy composites via electric field alignment of carbon nanofibres and short carbon fibres
Anil R. Ravindran et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Fatigue Behaviour of Composite T-Joints in Wind Turbine Blade Applications
Y. Wang et al.
APPLIED COMPOSITE MATERIALS (2017)
Synergy effect of carbon nano-fillers on the fracture toughness of structural composites
C. Kostagiannakopoulou et al.
COMPOSITES PART B-ENGINEERING (2017)
Strengthening of composite T-joints using novel ply design approaches
L. Burns et al.
COMPOSITES PART B-ENGINEERING (2016)
Multi-scale toughening of fibre composites using carbon nanofibres and z-pins
Raj B. Ladani et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Toughening of epoxy-based hybrid nanocomposites
D. Carolan et al.
POLYMER (2016)
Bio-inspired hierarchical design of composite T-joints with improved structural properties
L. Burns et al.
COMPOSITES PART B-ENGINEERING (2015)
Demonstration of pseudo-ductility in unidirectional discontinuous carbon fibre/epoxy prepreg composites
Gergely Czel et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Characteristic of mode I fatigue crack propagation of CFRP laminates toughened with CNF interlayer
Masahiro Arai et al.
COMPOSITES PART B-ENGINEERING (2014)
Enhanced tensile strength of composite joints by using staple-like pins: Working principles and experimental validation
T. Loebel et al.
COMPOSITE STRUCTURES (2013)
Improving the fracture resistance of sandwich composite T-joints by z-pinning
A. M. Nanayakkara et al.
COMPOSITE STRUCTURES (2013)
An investigation of Mode I and Mode II fracture toughness enhancement using aligned carbon nanotubes forests at the crack interface
Brian G. Falzon et al.
COMPOSITE STRUCTURES (2013)
Healing of carbon fibre-epoxy composite T-joints using mendable polymer fibre stitching
T. Yang et al.
COMPOSITES PART B-ENGINEERING (2013)
The modelling of the toughening of epoxy polymers via silica nanoparticles: The effects of volume fraction and particle size
D. J. Bray et al.
POLYMER (2013)
Bio-inspired design of aerospace composite joints for improved damage tolerance
L. A. Burns et al.
COMPOSITE STRUCTURES (2012)
The strength of composite bonded T-joints transversely reinforced by carbon pins
Yong-Bin Park et al.
COMPOSITE STRUCTURES (2012)
Strength improvement to composite T-joints under bending through bio-inspired design
L. A. Burns et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Finite element modelling of z-pinned composite T-joints
F. Bianchi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Improving the structural properties and damage tolerance of bonded composite joints using z-pins
T. M. Koh et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Experimental determination of the structural properties and strengthening mechanisms of z-pinned composite T-joints
T. M. Koh et al.
COMPOSITE STRUCTURES (2011)
Characterization of fiber volume fraction gradients in composite laminates
Michael T. Cann et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Influences of friction, geometric nonlinearities, and fixture compliance on experimentally observed toughnesses from three and four-point bend end-notched flexure tests
Barry D. Davidson et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
3D reinforcement of stiffener-to-skin T-joints by Z-pinning and tufting
Denis D. R. Cartie et al.
ENGINEERING FRACTURE MECHANICS (2006)
Predicting delamination and debonding in modern aerospace composite structures
GAO Davies et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Manufacturing carbon nanofibers toughened polyester/glass fiber composites using vacuum assisted resin transfer molding for enhancing the mode-I delamination resistance
Ramin Sadeghian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites
FH Gojny et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
The effect of silica nano particles and rubber particles on the toughness of multiphase thermosetting epoxy polymers
AJ Kinloch et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Geometry and damage effects in a composite marine T-joint
F Dharmawan et al.
COMPOSITE STRUCTURES (2004)
Parametric analyses of stitched composite T-joints by the finite element method
PB Stickler et al.
MATERIALS & DESIGN (2002)
Experimental and numerical analysis of transverse stitched T-joints in bending
PB Stickler et al.
COMPOSITE STRUCTURES (2000)