相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Impurity and texture driven HCP-to-FCC transformations in Ti-X thin films during in situ TEM annealing and FIB milling
Rachel Traylor et al.
ACTA MATERIALIA (2020)
Gum-like mechanical behavior of a partially ordered Al5Nb24Ti40V5Zr26 high entropy alloy
S. Zherebtsov et al.
INTERMETALLICS (2020)
Could face-centered cubic titanium in cold-rolled commercially-pure titanium only be a Ti-hydride?
Yanhong Chang et al.
SCRIPTA MATERIALIA (2020)
Boron modified titanium alloys
Gaurav Singh et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Natural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility
Shaolou Wei et al.
NATURE MATERIALS (2020)
PNADIS: An automated Peierls-Nabarro analyzer for dislocation core structure and slip resistance
S. H. Zhang et al.
COMPUTER PHYSICS COMMUNICATIONS (2019)
Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity
Wenwen Sun et al.
SCIENCE (2019)
Superelastic effect in Ti-rich high entropy alloys via stress-induced martensitic transformation
Lu Wang et al.
SCRIPTA MATERIALIA (2019)
Ti and its alloys as examples of cryogenic focused ion beam milling of environmentally-sensitive materials
Yanhong Chang et al.
NATURE COMMUNICATIONS (2019)
Effect of strain reversal on the stress-induced martensitic transformation and tensile properties of a metastable β titanium alloy
Xinkai Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Fine alpha in current and newly developed Ti alloys
M. Wang et al.
ACTA MATERIALIA (2019)
Uncovering the influence of metallic and non-metallic impurities on the ideal shear strength and ductility of Ti: An ab-initio study
P. Garg et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Oxygen effects on crystal plasticity of Titanium: A multiscale calibration and validation framework
C. Kale et al.
ACTA MATERIALIA (2019)
Oxygen effects on ω and α phase transformations in a metastable β Ti-Nb alloy
Kathleen Chou et al.
ACTA MATERIALIA (2019)
Three dimensional crystallographic orientation relationships for hexagonal close packed structure to face centered cubic structure transformation in pure titanium
Bingqiang Wei et al.
SCRIPTA MATERIALIA (2019)
Micropillar compression study of Fe-irradiated 304L steel
Elie Paccou et al.
SCRIPTA MATERIALIA (2019)
Sub-stoichiometry-facilitated oxidation kinetics in a δ-TixC-doped Ti-based alloy
Shaolou Wei et al.
NPJ MATERIALS DEGRADATION (2019)
Investigations on micro-mechanical properties of polycrystalline Ti(C,N) and Zr(C,N) coatings
Idriss El Azhari et al.
ACTA MATERIALIA (2018)
Boron doped ultrastrong and ductile high-entropy alloys
Jae Bok Seol et al.
ACTA MATERIALIA (2018)
In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy
Meimei Wang et al.
ACTA MATERIALIA (2018)
Face-centered-cubic titanium - A new crystal structure of Ti in a Ti-8Mo-6Fe alloy
G. Han et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Interactive effects of cyclic oxidation and structural evolution for Ti-6Al-4V/(TiC+TiB) alloy composites at elevated temperatures
S. L. Wei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Development and exploration of refractory high entropy alloys-A review
Oleg N. Senkov et al.
JOURNAL OF MATERIALS RESEARCH (2018)
The microstructure and formation mechanism of face-centered cubic Ti in commercial pure Ti foils during tensile deformation at room temperature
Chang Chen et al.
MATERIALS CHARACTERIZATION (2018)
In-situ TEM observation of hcp-Ti to fcc-Ti phase transformation in Nb-Ti-Si based alloys
Xiao Ma et al.
MATERIALS CHARACTERIZATION (2018)
Interstitial strengthening of refractory ZrTiHfNb0.5Ta0.5Ox (x=0.05, 0.1, 0.2) high-entropy alloys
Yiwen Chen et al.
MATERIALS LETTERS (2018)
Size effects on the tensile properties and deformation mechanism of commercial pure titanium foils
S. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Zhifeng Lei et al.
NATURE (2018)
Design and tensile properties of a bcc Ti-rich high-entropy alloy with transformation-induced plasticity
Lola Lilensten et al.
MATERIALS RESEARCH LETTERS (2017)
Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties
Zhiming Li et al.
JOM (2017)
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Suihe Jiang et al.
NATURE (2017)
In situ TEM observation of FCC Ti formation at elevated temperatures
Qian Yu et al.
SCRIPTA MATERIALIA (2017)
Comments on 'Composite structure of a phase in metastable β Ti alloys induced by lattice strain during β to α phase transformation'
Dipankar Banerjee
SCRIPTA MATERIALIA (2017)
Complexion-mediated martensitic phase transformation in Titanium
J. Zhang et al.
Nature Communications (2017)
Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys
Zhiming Li et al.
SCIENTIFIC REPORTS (2017)
Phase-Transformation Ductilization of Brittle High-Entropy Alloys via Metastability Engineering
Hailong Huang et al.
ADVANCED MATERIALS (2017)
On recrystallization of the α and β phases in titanium alloys
Shanoob Balachandran et al.
ACTA MATERIALIA (2017)
Local strain rate sensitivity of single α phase within a dual-phase Ti alloy
Tea-Sung Jun et al.
ACTA MATERIALIA (2016)
Solid solution strengthening of hexagonal titanium alloys: Restoring forces and stacking faults calculated from first principles
P. Kwasniak et al.
ACTA MATERIALIA (2016)
On variant distribution and coarsening behavior of the a phase in a metastable β titanium alloy
Shanoob Balachandran et al.
ACTA MATERIALIA (2016)
Structural-disorder and its effect on mechanical properties in single-phase TaNbHfZr high-entropy alloy
Soumyadipta Maiti et al.
ACTA MATERIALIA (2016)
First-principles calculations of generalized-stacking-fault-energy of Co-based alloys
Tria Laksana Achmad et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
Alloy design for aircraft engines
Tresa M. Pollock
NATURE MATERIALS (2016)
Rolling-induced Face Centered Cubic Titanium in Hexagonal Close Packed Titanium at Room Temperature
H. C. Wu et al.
SCIENTIFIC REPORTS (2016)
PTCLab: free and open-source software for calculating phase transformation crystallography
X. -F. Gu et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2016)
Fundamentals of electron energy-loss spectroscopy
F. Hofer et al.
14TH EUROPEAN WORKSHOP ON MODERN DEVELOPMENTS AND APPLICATIONS IN MICROBEAM ANALYSIS (EMAS 2015 WORKSHOP) (2016)
Multiscale modeling of the mechanical behavior of IN718 superalloy based on micropillar compression and computational homogenization
A. Cruzado et al.
ACTA MATERIALIA (2015)
Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?
L. J. Huang et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Charting the complete elastic properties of inorganic crystalline compounds
Maarten de Jong et al.
SCIENTIFIC DATA (2015)
An FCC phase in a metastable β-titanium alloy
R. Sarkar et al.
PHILOSOPHICAL MAGAZINE LETTERS (2014)
Perspectives on Titanium Science and Technology
Dipankar Banerjee et al.
ACTA MATERIALIA (2013)
Lithium Atom and A-Site Vacancy Distributions in Lanthanum Lithium Titanate
Xiang Gao et al.
CHEMISTRY OF MATERIALS (2013)
Microstructural evolution and formation mechanism of FCC titanium during heat treatment processing
R. Jing et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Direct visualization of reversible dynamics in a Si6 cluster embedded in a graphene pore
Jaekwang Lee et al.
NATURE COMMUNICATIONS (2013)
Size-Temperature Phase Diagram of Titanium Nanosolids
Shiyun Xiong et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Thickness-dependent fcc-hcp phase transformation in polycrystalline titanium thin films
J. Chakraborty et al.
ACTA MATERIALIA (2011)
Robust atomic resolution imaging of light elements using scanning transmission electron microscopy
S. D. Findlay et al.
APPLIED PHYSICS LETTERS (2009)
Effects of hot compression and heat treatment on the microstructure and tensile property of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy
L. J. Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Investigating carbonization and graphitization using electron energy loss spectroscopy (EELS) in the transmission electron microscope (TEM)
H. Daniels et al.
PHILOSOPHICAL MAGAZINE (2007)
Phase stabilities of fcc Ti nanocrystals
ZP Chen et al.
SOLID STATE COMMUNICATIONS (2004)
Formation of face-centered-cubic titanium by mechanical attrition
I Manna et al.
JOURNAL OF APPLIED PHYSICS (2003)
Novel Ti-base nanostructure-dendrite composite with enhanced plasticity
G He et al.
NATURE MATERIALS (2003)
Formation of fcc titanium during heating high energy ball milled Al-Ti powders
DL Zhang et al.
MATERIALS LETTERS (2002)
分享论文
