相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Optimization of machining parameters for abrasive water jet drilling of carbon fiber-reinforced polymer composite material using Taguchi method
Meltem Altin Karatas et al.
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY (2020)
Machining performance optimization in drilling of multiwall carbon nano tube/epoxy nanocomposites using GRA-PCA hybrid approach
Prakhar Kumar Kharwar et al.
MEASUREMENT (2020)
Influence of abrasive water jet cutting on glass fibre reinforced polymer (GFRP) composites
U. Ashok Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Enhancing interfacial properties of carbon fibers reinforced epoxy composites via Layer-by-Layer self assembly GO/SiO2 multilayers films on carbon fibers surface
Junsong Fu et al.
APPLIED SURFACE SCIENCE (2019)
Multi-objective optimization in WEDM process of graphene - SiC-magnesium composite through hybrid techniques
V. Kavimani et al.
MEASUREMENT (2019)
Mechanical behavior of Graphene decorated carbon fiber reinforced polymer composites: An assessment of the influence of functional groups
Pavan Kumar Gangineni et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
Emin Salur et al.
COMPOSITES PART B-ENGINEERING (2019)
Optimization and prediction of thrust force, vibration and delamination in drilling of functionally graded composite using Taguchi, ANOVA and ANN analysis
Ugur Koklu et al.
MATERIALS RESEARCH EXPRESS (2019)
Prediction and optimization of machining forces using oxley's predictive theory and RSM approach during machining of WHAs
Chithajalu Kiran Sagar et al.
DEFENCE TECHNOLOGY (2019)
Analysis of grey relational method of the effects on machinability performance on austempered vermicular graphite cast irons
Gultekin Uzun
MEASUREMENT (2019)
Multi objective prediction and optimization of control parameters in the milling of aluminium hybrid metal matrix composites using ANN and Taguchi -grey relational analysis
S. Ajith Arul Daniel et al.
DEFENCE TECHNOLOGY (2019)
Monitoring the drilling process of GFRP laminates with carbon nanotube buckypaper sensor
Gong Dong Wang et al.
COMPOSITE STRUCTURES (2019)
Experimental and numerical investigation on the mechanical characteristics of polyethylenimine functionalized graphene oxide incorporated woven carbon fibre/epoxy composites
Nitai Chandra Adak et al.
COMPOSITES PART B-ENGINEERING (2019)
A novelty optimization approach for drilling of CFRP nanocomposite laminates
Halil Burak Kaybal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Evaluation of drilling performances of nanocomposites reinforced with graphene and graphene oxide
Yahya Hisman Celik et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Optimization of process parameters of metal inert gas welding with preheating on AISI 1018 mild steel using grey based Taguchi method
Sudhir Kumar et al.
MEASUREMENT (2019)
Using dampers to mitigate thrust forces during carbon-fibre reinforced polymer drilling: Experimental and finite element evaluation
Gong-Dong Wang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
Improved mechanical properties of carbon fiber reinforced PTFE composites by growing graphene oxide on carbon fiber surface
Runqin He et al.
COMPOSITE INTERFACES (2018)
Investigation on delamination and flexural properties in drilling of carbon nanotube/polymer composites
Hossein Heidary et al.
COMPOSITE STRUCTURES (2018)
Effect of drilling parameters on hole quality and delamination of hybrid GLARE laminate
Sang Yoon Park et al.
COMPOSITE STRUCTURES (2018)
A new method to reduce delaminations during drilling of FRP laminates by feed rate control
L. Sorrentino et al.
COMPOSITE STRUCTURES (2018)
Multi-layer graphene reinforced aluminum - Manufacturing of high strength composite by friction stir alloying
Saurabh Dixit et al.
COMPOSITES PART B-ENGINEERING (2018)
Microstructure and mechanical properties of graphene nanoplates reinforced pure Al matrix composites prepared by pressure infiltration method
Wenshu Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Optimizing submerged arc welding using response surface methodology, regression analysis, and genetic algorithm
Ajitanshu Vedrtnam et al.
DEFENCE TECHNOLOGY (2018)
Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP
Markus Muth et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2018)
Prediction of Thrust Force and Cutting Torque in Drilling Based on the Response Surface Methodology
Panagiotis Kyratsis et al.
MACHINES (2018)
A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials
Meltem Altin Karatas et al.
DEFENCE TECHNOLOGY (2018)
Optimization of drilling delamination behavior of GFRP/clay nano-composites using RSM and GRA methods
S. Ragunath et al.
FIBERS AND POLYMERS (2017)
General overview of graphene: Production, properties and application in polymer composites
Josphat Phiri et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)
Optimisation of process parameters for the orbital and conventional drilling of uni-directional carbon fibre-reinforced polymers (UD-CFRP)
Norbert Geier et al.
MEASUREMENT (2017)
Multi-objective optimization of manual metal arc welding process parameters for nano-structured hardfacing material using hybrid approach
Abhijit Saha et al.
MEASUREMENT (2017)
Use of PCA-grey analysis and RSM to model cutting time and surface finish of Inconel 800 during wire electro discharge cutting
H. Majumder et al.
MEASUREMENT (2017)
Silver nanoparticles/graphene oxide decorated carbon fiber synergistic reinforcement in epoxy-based composites
Caifeng Wang et al.
POLYMER (2017)
General overview of graphene: Production, properties and application in polymer composites
Josphat Phiri et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)
Optimization of Drilling Characteristics using Grey-Fuzzy logic in Glass Fiber Reinforced Polymer (GFRP)
K. Shunmugesh et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Synergy effect of carbon nano-fillers on the fracture toughness of structural composites
C. Kostagiannakopoulou et al.
COMPOSITES PART B-ENGINEERING (2017)
Inter laminar shear strength behavior of acid, base and silane treated E-glass fibre epoxy resin composites on drilling process
V. R. Arun Prakash et al.
DEFENCE TECHNOLOGY (2017)
Effects of graphene content on the microstructure and properties of copper matrix composites
Fanyan Chen et al.
CARBON (2016)
Effect of oxidation degrees of graphene oxide on the structure and properties of poly (vinyl alcohol) composite films
Di Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Effect of in-situ processing parameters on microstructure and mechanical properties of TiC particulate reinforced Al-4.5Cu alloy MMC fabricated by stir-casting technique - Optimization using grey based differential evolution algorithm
Biswajit Das et al.
MEASUREMENT (2016)
An experimental investigation on the process parameters influencing machining forces during milling of carbon and glass fiber laminates
N. Rajesh Mathivanan et al.
MEASUREMENT (2016)
Multi-objective optimization in WEDM process of nanostructured hardfacing materials through hybrid techniques
Abhijit Saha et al.
MEASUREMENT (2016)
Graphene oxide and graphene nanosheet reinforced aluminium matrix composites: Powder synthesis and prepared composite characteristics
Jinghang Liu et al.
MATERIALS & DESIGN (2016)
Evaluation of machining damage around drilled holes in a CFRP by fiber residual stresses measured using micro-Raman spectroscopy
Takushi Miyake et al.
MECHANICAL ENGINEERING JOURNAL (2016)
Optimisation of laser welding parameters for welding of P92 material using Taguchi based grey relational analysis
B. Shanmugarajan et al.
DEFENCE TECHNOLOGY (2016)
Interlaminar mechanical properties of carbon fiber reinforced plastic laminates modified with graphene oxide interleaf
Huiming Ning et al.
CARBON (2015)
Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplateletsat the fiber-matrix interphase
Wenzhen Qin et al.
COMPOSITES PART B-ENGINEERING (2015)
A new approach to minimization of the surface roughness and cutting force via fuzzy TOPSIS, multi-objective grey design and RSA
Arif Gok
MEASUREMENT (2015)
Progression from Graphene and Graphene Oxide to High Performance Polymer-Based Nanocomposite: A Review
Rahim Shah et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2015)
Optimization of thrust, torque, entry, and exist delamination factor during drilling of CFRP composites
Kumar Abhishek et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Optimization of weld characteristics of friction welded AA 6061-AA 6351 joints using grey-principal component analysis (G-PCA)
R. Adalarasan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2014)
Electrically and thermally conductive elastomer/graphene nanocomposites by solution mixing
Sherif Araby et al.
POLYMER (2014)
Thermo-mechanical properties of poly (vinyl chloride)/graphene oxide as high performance nanocomposites
Kalim Deshmukh et al.
POLYMER TESTING (2014)
The Chemical and structural analysis of graphene oxide with different degrees of oxidation
Karthikeyan Krishnamoorthy et al.
CARBON (2013)
Drilling of polymer matrix composites: A review
U. A. Khashaba
JOURNAL OF COMPOSITE MATERIALS (2013)
In situ polymerization and mechanical, thermal properties of polyurethane/graphene oxide/epoxy nanocomposites
Yuqi Li et al.
MATERIALS & DESIGN (2013)
Control of the functionality of graphene oxide for its in epoxy nanocomposites application
Zheng Li et al.
POLYMER (2013)
Delamination and wear in drilling of carbon-fiber reinforced plastic composites using multilayer TiAlN/TiN PVD-coated tungsten carbide tools
Ozden Isbilir et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics
A. Krishnamoorthy et al.
MEASUREMENT (2012)
Magnetic Fe3O4-graphene oxide/polystyrene: Fabrication and characterization of a promising nanocomposite
M. Z. Kassaee et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Experimental investigation and optimisation in drilling of GFRP composites
K. Palanikumar
MEASUREMENT (2011)
Graphene/polyethylene nanocomposites: Effect of polyethylene functionalization and blending methods
Hyunwoo Kim et al.
POLYMER (2011)
Investigation on Drilling-induced Delamination of CFRP with Infiltration Method
Yanming Quan et al.
MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3 (2011)
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Yanwu Zhu et al.
ADVANCED MATERIALS (2010)
Machinability analysis in drilling woven GFR/epoxy composites: Part I - Effect of machining parameters
U. A. Khashaba et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Machinability analysis in drilling woven GFR/epoxy composites: Part II - Effect of drill wear
U. A. Khashaba et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Recent advances in graphene based polymer composites
Tapas Kuilla et al.
PROGRESS IN POLYMER SCIENCE (2010)
Synthesis of enhanced hydrophilic and hydrophobic graphene oxide nanosheets by a solvothermal method
Guoxiu Wang et al.
CARBON (2009)
Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA
Bala Murugan Gopalsamy et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite
A. M. Abrao et al.
MATERIALS & DESIGN (2008)
A multivariate hybrid approach applied to AISI 52100 hardened steel turning optimization
Anderson P. Paiva et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Mathematical model to predict the surface roughness on the machining of glass fiber reinforced polymer composites
K Palanikumar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
Cutting parameters optimization for surface roughness in machining of GFRP composites using Taguchi's method
K. Palanikumar
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
Delamination in drilling GFR-thermoset composites
UA Khashaba
COMPOSITE STRUCTURES (2004)
Investigation on thrust in vibration drilling of fiber-reinforced plastics
X Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Comprehensive analysis of delamination in drilling of composite materials with various drill bits
H Hocheng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
分享论文
