相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
G. D. Goh et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)
Fused deposition modelling: a review
Swapnil Vyavahare et al.
RAPID PROTOTYPING JOURNAL (2020)
Controllable interfacial adhesion behaviors of polymer-on-polymer surfaces during fused deposition modeling 3D printing process
Xu Zhang et al.
CHEMICAL PHYSICS LETTERS (2020)
Fused deposition modelling interfacial and interlayer bonding in PLA post-processed parts
Ana P. Valerga Puerta et al.
RAPID PROTOTYPING JOURNAL (2020)
The role of heating and cooling in viscous sintering of pairs of spheres and pairs of cylinders
Nickolas D. Polychronopoulos et al.
RAPID PROTOTYPING JOURNAL (2020)
Static and Dynamic Mechanical Properties of 3D Printed ABS as a Function of Raster Angle
Mateusz Galeja et al.
MATERIALS (2020)
Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties
S. Garzon-Hernandez et al.
MATERIALS & DESIGN (2020)
Optimization and Quality Evaluation of the Interlayer Bonding Performance of Additively Manufactured Polymer Structures
Patrick Striemann et al.
POLYMERS (2020)
Multi-Material 3D and 4D Printing: A Survey
Mohammad Rafiee et al.
ADVANCED SCIENCE (2020)
Mechanical characterization of biocompatible PEEK by FDM
Yachen Zhao et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Material Extrusion-Based Additive Manufacturing with Blends of Polypropylene and Hydrocarbon Resins
Arit Das et al.
ACS APPLIED POLYMER MATERIALS (2020)
Influence of temperature on polymer parts manufactured by fused deposition modeling process
Deep Bhalodi et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
Carmen M. Gonzalez-Henriquez et al.
PROGRESS IN POLYMER SCIENCE (2019)
Effect of Ultrasonic Vibration on Interlayer Adhesion in Fused Filament Fabrication 3D Printed ABS
Alireza Tofangchi et al.
POLYMERS (2019)
A numerical study of the effect of viscoelastic stresses in fused filament fabrication
Huanxiong Xia et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Mechanical properties of 3D parts fabricated by fused deposition modeling: Effect of various fillers in polylactide
Xia Gao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Flexible, transparent, sub-100 μm microfluidic channels with fused deposition modeling 3D-printed thermoplastic polyurethane
Matt D. Nelson et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)
Modeling of interlayer contact and contact pressure during fused filament fabrication
Timothy J. Coogan et al.
JOURNAL OF RHEOLOGY (2019)
Fused deposition modeling with polyamide 1012
Xia Gao et al.
RAPID PROTOTYPING JOURNAL (2019)
In Situ Time-Resolved X-ray Scattering Study of Isotactic Polypropylene in Additive Manufacturing
Yuval Shmueli et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Effect of Porosity and Crystallinity on 3D Printed PLA Properties
Yuhan Liao et al.
POLYMERS (2019)
Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup
Josef Kiendl et al.
COMPOSITES PART B-ENGINEERING (2019)
Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer
Shilpesh R. Rajpurohit et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
A study on extruded filament bonding in fused filament fabrication
Ana Elisa Costa et al.
RAPID PROTOTYPING JOURNAL (2019)
Structure Development in Polymers during Fused Filament Fabrication (FFF): An in Situ Small- and Wide-Angle X-ray Scattering Study Using Synchrotron Radiation
Aurora Nogales et al.
MACROMOLECULES (2019)
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Guo Dong Goh et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Interlayer thermal history modification for interface strength in fused filament fabricated parts
Anagh Deshpande et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
3D printed porous PLA/nHA composite scaffolds with enhanced osteogenesis and osteoconductivity in vivo for bone regeneration
Xibao Chen et al.
BIOMEDICAL MATERIALS (2019)
Improving Interlayer Adhesion in 3D Printing with Surface Segregating Additives: Improving the Isotropy of Acrylonitrile-Butadiene-Styrene Parts
Neiko P. Levenhagen et al.
ACS APPLIED POLYMER MATERIALS (2019)
Simultaneous in Situ X-ray Scattering and Infrared Imaging of Polymer Extrusion in Additive Manufacturing
Yuval Shmueli et al.
ACS APPLIED POLYMER MATERIALS (2019)
Interfacial Stereocomplexation To Strengthen Fused Deposition Modeled Poly(lactide) Welds
Varun Srinivas et al.
ACS APPLIED POLYMER MATERIALS (2019)
Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
Martin Spoerk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
3D printing of high drug loaded dosage forms using thermoplastic polyurethanes
G. Verstraete et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing
Radoslaw A. Wach et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Polypropylene Filled With Glass Spheres in Extrusion-Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
3D printing of thermoplastic PI and interlayer bonding evaluation
Wenzheng Wu et al.
MATERIALS LETTERS (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
Neiko P. Levenhagen et al.
POLYMER (2018)
Correlating molecular and crystallization dynamics to macroscopic fusion and thermodynamic stability in fused deposition modeling; a model study on polylactides
Varun Srinivas et al.
POLYMER (2018)
Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing
Kevin R. Hart et al.
POLYMER (2018)
Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion
Jun Yin et al.
MATERIALS & DESIGN (2018)
Performance of biocompatible PEEK processed by fused deposition additive manufacturing
M. F. Arif et al.
MATERIALS & DESIGN (2018)
Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling
Guangxin Liao et al.
MATERIALS & DESIGN (2018)
A study of creep in polycarbonate fused deposition modelling parts
Antonio G. Salazar-Martin et al.
MATERIALS & DESIGN (2018)
Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process
Nahal Aliheidari et al.
MATERIALS & DESIGN (2018)
Effect of processing conditions on crystallization kinetics during materials extrusion additive manufacturing
Lily A. Northcutt et al.
POLYMER (2018)
Highly Loaded Graphite-Polylactic Acid Composite-Based Filaments for Lithium-Ion Battery Three-Dimensional Printing
Alexis Maurel et al.
CHEMISTRY OF MATERIALS (2018)
Rheology, crystal structure, and nanomechanical properties in large-scale additive manufacturing of polyphenylene sulfide/carbon fiber composites
Peng Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
The importance of rheological behavior in the additive manufacturing technique material extrusion
Michael E. Mackay
JOURNAL OF RHEOLOGY (2018)
3D printable thermoplastic polyurethane blends with thermal energy storage/release capabilities
D. Rigotti et al.
MATERIALS TODAY COMMUNICATIONS (2018)
general method to improve 3D-printability and inter-layer adhesion in lignin-based composites
Ngoc A. Nguyen et al.
APPLIED MATERIALS TODAY (2018)
Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)
Claire Benwood et al.
ACS OMEGA (2018)
Effect of nanoparticles on the mechanical properties of acrylonitrile-butadiene-styrene specimens fabricated by fused deposition modeling
Shuna Meng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Effects of styrene-acrylonitrile contents on the properties of ABS/SAN blends for fused deposition modeling
Jin Zhu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling
Dingchun Zhu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Evaluating Mechanical Properties and Failure Mechanisms of Fused Deposition Modeling Acrylonitrile Butadiene Styrene Parts
M. S. Uddin et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Estimation of filament temperature and adhesion development in fused deposition techniques
S. F. Costa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing
Claire McIlroy et al.
JOURNAL OF RHEOLOGY (2017)
Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
Neiko P. Levenhagen et al.
POLYMER (2017)
Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing
C. McIlroy et al.
POLYMER (2017)
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Lu Wang et al.
POLYMER (2017)
Fracture resistance measurement of fused deposition modeling 3D printed polymers
Nahal Aliheidari et al.
POLYMER TESTING (2017)
On the use of high viscosity polymers in the fused filament fabrication process
Muhammad Hussam Khaliq et al.
RAPID PROTOTYPING JOURNAL (2017)
Bonding quality and fracture analysis of polyamide 12 parts fabricated by fused deposition modeling
Hao Li et al.
RAPID PROTOTYPING JOURNAL (2017)
Effect of layer thickness on irreversible thermal expansion and interlayer strength in fused deposition modeling
Anthony A. D'Amico et al.
RAPID PROTOTYPING JOURNAL (2017)
Healing simulation for bond strength prediction of FDM
Timothy J. Coogan et al.
RAPID PROTOTYPING JOURNAL (2017)
Bond and part strength in fused deposition modeling
Timothy J. Coogan et al.
RAPID PROTOTYPING JOURNAL (2017)
Weld formation during material extrusion additive manufacturing
Jonathan E. Seppala et al.
SOFT MATTER (2017)
3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
Josef F. Christ et al.
MATERIALS & DESIGN (2017)
Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing
Daniel-Alexander Tuerk et al.
MATERIALS & DESIGN (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating
Charles B. Sweeney et al.
SCIENCE ADVANCES (2017)
Toward improvement of the properties of parts manufactured by FFF (Fused Filament Fabrication) through understanding the influence of temperature and rheological behaviour on the coalescence phenomenon
Bakrani Balani Shahriar et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
A review on additive manufacturing of polymer-fiber composites
Pedram Parandoush et al.
COMPOSITE STRUCTURES (2017)
Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers
Rafael Thiago Luiz Ferreira et al.
COMPOSITES PART B-ENGINEERING (2017)
Principles of viscous sintering in amorphous powders: A critical review
Mohammadmandi Kamyabi et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)
Diels-Alder Reversible Thermoset 3D Printing: Isotropic Thermoset Polymers via Fused Filament Fabrication
Kejia Yang et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
3D Printing Biocompatible Polyurethane/Poly(lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties
Qiyi Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Design Paradigm Utilizing Reversible Diels-Alder Reactions to Enhance the Mechanical Properties of 3D Printed Materials
Joshua R. Davidson et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Interfacial mechanical behavior of 3D printed ABS
Daniel P. Cole et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
An improved fused deposition modeling process for forming large-size thin-walled parts
Du Jun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion
Sebastian Hertle et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2016)
Recent developments in 3D printable composite materials
Umme Kalsoom et al.
RSC ADVANCES (2016)
An in-process laser localized pre-deposition heating approach to inter-layer bond strengthening in extrusion based polymer additive manufacturing
Abinesh Kurapatti Ravi et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Michael Dawoud et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
In-situ monitoring of strain and temperature distributions during fused deposition modeling process
Charoula Kousiatza et al.
MATERIALS & DESIGN (2016)
Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory
Caterina Casavola et al.
MATERIALS & DESIGN (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation
Behzad Rankouhi et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2016)
Effect of geometry on drug release from 3D printed tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Structure-mechanical property relationship in fused deposition modelling
H. Rezayat et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
Wenzheng Wu et al.
MATERIALS (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
The importance of carbon fiber to polymer additive manufacturing
Lonnie J. Love et al.
JOURNAL OF MATERIALS RESEARCH (2014)
On reducing anisotropy in 3D printed polymers via ionizing radiation
Steven Shaffer et al.
POLYMER (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Multi-material, multi-technology FDM: exploring build process variations
David Espalin et al.
RAPID PROTOTYPING JOURNAL (2014)
Part strength evolution with bonding between filaments in fused deposition modelling This paper studies how coalescence of filaments contributes to the strength of final FDM part
Pavan Kumar Gurrala et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2014)
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Jyrki Korpela et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Anoop Kumar Sood et al.
MATERIALS & DESIGN (2010)
Design and manufacture of a Formula SAE intake system using fused deposition modeling and fiber-reinforced composite materials
Ryan Ilardo et al.
RAPID PROTOTYPING JOURNAL (2010)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Measurement of anisotropic compressive strength of rapid prototyping parts
C. S. Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Frenkel's Theory of Sintering
M. M. Ristic et al.
SCIENCE OF SINTERING (2006)
Optimization of rapid prototyping parameters for production of flexible ABS object
BH Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)
Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling
JF Rodriguez et al.
RAPID PROTOTYPING JOURNAL (2003)
Healing of thermoplastic polymers at an interface under nonisothermal conditions
F Yang et al.
MACROMOLECULES (2002)
Welding behavior of semicrystalline polymers. 2. Effect of cocrystallization on autoadhesion
YQ Xue et al.
MACROMOLECULES (2000)
分享论文
