相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Fatigue limit prediction and analysis of nano-structured AISI 304 steel by severe shot peening via ANN
Erfan Maleki et al.
ENGINEERING WITH COMPUTERS (2021)
Effect of Laser Shock Peening on Properties of Heat-Treated Ti-6Al-4V Manufactured by Laser Powder Bed Fusion
Inkyu Yeo et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)
Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects
J. W. Pegues et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
A diagram for capturing and predicting failure locations in notch geometries produced by additive manufacturing
Klas Solberg et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing
M. Kahlin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue performance of cold spray deposits: Coating, repair and additive manufacturing cases
Sara Bagherifard et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification
Yusuf Efe et al.
APPLIED SURFACE SCIENCE (2020)
An improvement in fatigue behavior of AISI 4340 steel by shot peening and ultrasonic nanocrystal surface modification
Ruslan Karimbaev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of local treatment temperature of ultrasonic nanocrystalline surface modification on tribological behavior and corrosion resistance of stainless steel 316L produced by selective laser melting
Auezhan Amanov
SURFACE & COATINGS TECHNOLOGY (2020)
Effect of Mechanical Properties on Fatigue Life Enhancement of Additive Manufactured Titanium Alloy Treated by Various Peening Methods
Yuya Okura et al.
ADVANCED SURFACE ENHANCEMENT, INCASE 2019 (2020)
The influence of chemical polishing of titanium scaffolds on their mechanical strength and in-vitro cell response
Bartlomiej Wysocki et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Laser additive manufacturing of Zn porous scaffolds: Shielding gas flow, surface quality and densification
Peng Wen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel
M. Asberg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of additive manufacturing on the dynamic response of AlSi10Mg to laser shock loading
M. Laurencon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Surface modification of binder-jet additive manufactured Inconel 625 via electrospark deposition
Pablo D. Enrique et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Evaluating the Quality Surface Performance of Additive Manufacturing Systems: Methodology and a Material Jetting Case Study
Razvan Udroiu et al.
MATERIALS (2019)
Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds
Alexander Kopp et al.
ACTA BIOMATERIALIA (2019)
Accelerated biodegradation and improved mechanical performance of pure iron through surface grain refinement
Sara Bagherifard et al.
ACTA BIOMATERIALIA (2019)
Enhancing the Structural Performance of Lightweight Metals by Shot Peening
Sara Bagherifard
ADVANCED ENGINEERING MATERIALS (2019)
Laser additive manufacturing of Zn metal parts for biodegradable implants: Effect of gas flow on evaporation and formation quality
Yanzhe Chen et al.
JOURNAL OF LASER APPLICATIONS (2019)
Fatigue life and microstructure of additive manufactured Ti6Al4V after different finishing processes
L. Denti et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Pressure dependence of age-hardenability of aluminum cast alloys and coarsening of precipitates during hot isostatic pressing
S. Hafenstein et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The influence of additive manufacturing processing parameters on surface roughness and fatigue life
Joy Gockel et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Use of an Abrasive Water Cavitating Jet and Peening Process to Improve the Fatigue Strength of Titanium Alloy 6Al-4V Manufactured by the Electron Beam Powder Bed Melting (EBPB) Additive Manufacturing Method
Hitoshi Soyama et al.
JOM (2019)
Comparison of the microstructural, mechanical and wear properties of plasma oxidized Cp-Ti prepared by laser powder bed fusion additive manufacturing and forging processes
H. Kovaci
SURFACE & COATINGS TECHNOLOGY (2019)
Wear of additively manufactured tool steel in contact with aluminium alloy
E. Huttunen-Saarivirta et al.
WEAR (2019)
Effect of Surface and Subsurface Defects on Fatigue Behavior of AlSi10Mg Alloy Processed by Laser Powder Bed Fusion (L-PBF)
Milad Hamidi Nasab et al.
METALS (2019)
Surface layer nanocrystallization of carbon steels subjected to severe shot peening: Analysis and optimization
Erfan Maleki et al.
MATERIALS CHARACTERIZATION (2019)
From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials
S. M. Ahmadi et al.
ACTA BIOMATERIALIA (2019)
Surface structure modification of additively manufactured titanium components via femtosecond laser micromachining
Nathan Worts et al.
OPTICS COMMUNICATIONS (2019)
Effect of combined shot peening and ultrasonic nanocrystal surface modification processes on the fatigue performance of AISI 304
Auezhan Amanov et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Chemical surface finishing of AlSi10Mg components made by additive manufacturing
Fabio Scherillo
MANUFACTURING LETTERS (2019)
Surface nanotopography-induced favorable modulation of bioactivity and osteoconductive potential of anodized 3D printed Ti-6Al-4V alloy mesh structure
K. C. Nune et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2018)
Fluid and particle dynamics in laser powder bed fusion
P. Bidare et al.
ACTA MATERIALIA (2018)
Fatigue behavior prediction and analysis of shot peened mild carbon steels
Erfan Maleki et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity
M. Benedetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Heat treatments effects on functionalization and corrosion behavior of Ti-6Al-4V ELI alloy made by additive manufacturing
Guilherme Arthur Longhitano et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Laser polishing of additive manufactured CoCr alloy components with complex surface geometry
K. C. Yung et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Cold spray deposition for additive manufacturing of freeform structural components compared to selective laser melting
Sara Bagherifard et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Effects of conventional, severe, over, and re-shot peening processes on the fatigue behavior of mild carbon steel
Erfan Maleki et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Laser polishing of additive manufactured CoCr components for controlling their wettability characteristics
K. C. Yung et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Laser shock peening of laser additive manufactured Ti6Al4V titanium alloy
Wei Guo et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Synthesis, structure and mechanical properties of Ti-Al-Nb coatings formed by electron beam additive technique
S. Valkov et al.
VACUUM (2018)
Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties
Peng Wen et al.
MATERIALS & DESIGN (2018)
Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling
J. R. Honnige et al.
MATERIALS & DESIGN (2018)
On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing
Sara Bagherifard et al.
MATERIALS & DESIGN (2018)
Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications
Arash Ataee et al.
MATERIALS & DESIGN (2018)
Antibacterial and immunogenic behavior of silver coatings on additively manufactured porous titanium
M. Croes et al.
ACTA BIOMATERIALIA (2018)
Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
Hiroshige Masuo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718
Arun Ramanathan Balachandramurthi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Controlled hydrodynamic cavitation erosion with abrasive particles for internal surface modification of additive manufactured components
Arun Prasanth Nagalingam et al.
WEAR (2018)
The use of various peening methods to improve the fatigue strength of titanium alloy Ti6Al4V manufactured by electron beam melting
Hitoshi Soyama et al.
AIMS MATERIALS SCIENCE (2018)
Novel experimental methods for the determination of the boundaries between conventional, severe and over shot peening processes
Erfan Maleki et al.
SURFACES AND INTERFACES (2018)
The effects of ultrasonic nanocrystal surface modification on the fatigue performance of 3D-printed Ti64
Hao Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts
S. Bagehorn et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Integration of Heat Treatment with Shot Peening of 17-4 Stainless Steel Fabricated by Direct Metal Laser Sintering
Bandar AlMangour et al.
JOM (2017)
Improving surface finish and wear resistance of additive manufactured nickel-titanium by ultrasonic nano-crystal surface modification
Chi Ma et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts made by selective laser melting
M. Benedetti et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Cold Spray Deposition of Freestanding Inconel Samples and Comparative Analysis with Selective Laser Melting
Sara Bagherifard et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Effects of plasma electrolytic oxidation process on the mechanical properties of additively manufactured porous biomaterials
Zahra Gorgin Karaji et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Resorbable bone fixation alloys, forming, and post-fabrication treatments
Hamdy Ibrahim et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Microstructural and surface modifications and hydroxyapatite coating of Ti-6Al-4V triply periodic minimal surface lattices fabricated by selective laser melting
Chunze Yan et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Effect of laser processing parameters on porosity, microstructure and mechanical properties of porous Mg-Ca alloys produced by laser additive manufacturing
Chang Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Diode-based additive manufacturing of metals using an optically-addressable light valve
Manyalibo J. Matthews et al.
OPTICS EXPRESS (2017)
Study on surface shape control of pure Ti fabricated by electron beam melting using electrolytic polishing
Jae-Hyun Jung et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Surface modification of additive manufactured components by ultrasonic cavitation abrasive finishing
K. L. Tan et al.
WEAR (2017)
A new process for design and manufacture of tailor-made functionally graded composites through friction stir additive manufacturing
Abhay Sharma et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
3D Laser Shock Peening - A new method for the 3D control of residual stresses in Selective Laser Melting
Nikola Kalentics et al.
MATERIALS & DESIGN (2017)
Additive manufacturing of cardiovascular CoCr stents by selective laser melting
Ali Gokhan Demir et al.
MATERIALS & DESIGN (2017)
Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
Sonny Ly et al.
SCIENTIFIC REPORTS (2017)
Selective laser melting porous metallic implants with immobilized silver nanoparticles kill and prevent biofilm formation by methicillin-resistant Staphylococcus aureus
Ingmar A. J. van Hengel et al.
BIOMATERIALS (2017)
Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade
E. Salvati et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
High-temperature oxidatiOn behavior of laser-aided additively manufactured NiCrAlY coating
M. Ansari et al.
CORROSION SCIENCE (2017)
Formation characteristic, microstructure, and mechanical performances of aluminum-based components by friction stir additive manufacturing
Mao Yuqing et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Evaluation of Select Surface Processing Techniques for In Situ Application During the Additive Manufacturing Build Process
Todd A. Book et al.
JOM (2016)
Improvement in Geometrical Accuracy and Mechanical Property for Arc-Based Additive Manufacturing Using Metamorphic Rolling Mechanism
Yang Xie et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting
Jayasheelan Vaithilingam et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on β-grain refinement and texture modification in Ti-6Al-4V
J. Donoghue et al.
MATERIALS CHARACTERIZATION (2016)
Residual stress of as-deposited and rolled wire plus arc additive manufacturing Ti-6Al-4V components
F. Martina et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Wire plus Arc Additive Manufacturing
S. W. Williams et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
A risk matrix analysis method based on potential risk influence: A case study on cryogenic liquid hydrogen filling system
Yongsheng Duan et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2016)
New Ti-Alloys and Surface Modifications to Improve the Mechanical Properties and the Biological Response to Orthopedic and Dental Implants: A Review
Yvoni Kirmanidou et al.
BIOMED RESEARCH INTERNATIONAL (2016)
Improved surface of additive manufactured products by coating
Shan Yao et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Efficient additive manufacturing production of oxide- and nitride-dispersion-strengthened materials through atmospheric reactions in liquid metal deposition
H. Springer et al.
MATERIALS & DESIGN (2016)
Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing
Bandar AlMangour et al.
MATERIALS & DESIGN (2016)
Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting
Chunze Yan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Effects of anodizing parameters and heat treatment on nanotopographical features, bioactivity, and cell culture response of additively manufactured porous titanium
S. Amin Yavari et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Surface characterization and corrosion behavior of calcium phosphate-base composite layer on titanium and its alloys via plasma electrolytic oxidation: A review paper
A. R. Rafieerad et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
A comprehensive risk evaluation method for natural gas pipelines by combining a risk matrix with a bow-tie model
Linlin Lu et al.
JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
Finishing of additively manufactured titanium alloy by shape adaptive grinding (SAG)
Anthony T. Beaucamp et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2015)
Ti surface laser polishing: effect of laser path and assist gas
L. Giorleo et al.
9TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '14 (2015)
Bone regeneration performance of surface-treated porous titanium
Saber Amin Yavari et al.
BIOMATERIALS (2014)
Fatigue performance evaluation of selective laser melted Ti-6Al-4V
P. Edwards et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
High pressure interpass rolling of Wire plus Arc Additively Manufactured titanium components
Paul A. Colegrove et al.
RESIDUAL STRESSES IX (2014)
Additively manufactured 3D porous Ti-6Al-4V constructs mimic trabecular bone structure and regulate osteoblast proliferation, differentiation and local factor production in a porosity and surface roughness dependent manner
Alice Cheng et al.
BIOFABRICATION (2014)
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
Y. Estrin et al.
ACTA MATERIALIA (2013)
Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti-6Al-4V powder fractions
Joakim Karlsson et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Fatigue performance of additive manufactured metallic parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2013)
Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures
Grzegorz Pyka et al.
MATERIALS (2013)
Surface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing
Grzegorz Pyka et al.
ADVANCED ENGINEERING MATERIALS (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts
Evren Yasa et al.
RAPID PROTOTYPING JOURNAL (2011)
Surface integrity of selective-laser-melted components
E. Brinksmeier et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Fuzzy risk matrix
Adam S. Markowski et al.
JOURNAL OF HAZARDOUS MATERIALS (2008)
Laser polishing of parts built up by selective laser sintering
A. Lamikiz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Transport phenomena during direct metal deposition
X. He et al.
JOURNAL OF APPLIED PHYSICS (2007)
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
XY Liu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)
Improvement of fatigue strength of aluminum alloy by cavitation shotless peening
H Soyama et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2002)
分享论文
