相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Quality assurance in metal powder bed fusion via deep-learning-based image classification
Maximilian Hugo Kunkel et al.
RAPID PROTOTYPING JOURNAL (2020)
A convolutional approach to quality monitoring for laser manufacturing
Carlos Gonzalez-Val et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2020)
Microstructure modelling for metallic additive manufacturing: a review
Joel Heang Kuan Tan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Analysis of formation and growth of the σ phase in additively manufactured functionally graded materials
Lourdes D. Bobbio et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Wire-Based Additive Manufacturing of Stainless Steel Components
J. W. Elmer et al.
WELDING JOURNAL (2020)
Grain structure control during metal 3D printing by high-intensity ultrasound
C. J. Todaro et al.
NATURE COMMUNICATIONS (2020)
Effect of hot isostatic pressing on structure and properties of intermetallic NiAl-Cr-Mo alloy produced by selective laser melting
M. Khomutov et al.
INTERMETALLICS (2020)
Machine learning based hierarchy of causative variables for tool failure in friction stir welding
Y. Du et al.
ACTA MATERIALIA (2020)
Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder size distribution
Alexander M. Rausch et al.
COMPUTERS & MATHEMATICS WITH APPLICATIONS (2019)
Online quality inspection using Bayesian classification in powder-bed additive manufacturing from high-resolution visual camera images
Masoumeh Aminzadeh et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2019)
Micromechanical behavior and thermal stability of a dual-phase α plus α′ titanium alloy produced by additive manufacturing
Charlotte de Formanoir et al.
ACTA MATERIALIA (2019)
Powder-scale multi-physics modeling of multi-layer multi-track selective laser melting with sharp interface capturing method
Zekun Wang et al.
COMPUTATIONAL MECHANICS (2019)
Numerical methods for microstructural evolutions in laser additive manufacturing
Z. Zhang et al.
COMPUTERS & MATHEMATICS WITH APPLICATIONS (2019)
IoT-enabled cloud-based additive manufacturing platform to support rapid product development
Yuanbin Wang et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Predictive modelling of surface roughness in fused deposition modelling using data fusion
Dazhong Wu et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Coupled thermo-mechanical process simulation method for selective laser melting considering phase transformation steels
Michael Schaenzel et al.
COMPUTERS & MATHEMATICS WITH APPLICATIONS (2019)
Machine learning for continuous liquid interface production: Printing speed modelling
Haiyang He et al.
JOURNAL OF MANUFACTURING SYSTEMS (2019)
Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting
Olivier Andreau et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effect of powder oxygen content on microstructure and mechanical properties of a laser additively-manufactured 12CrNi2 alloy steel
Z. Dong et al.
MATERIALS LETTERS (2019)
Comparative investigation of small punch creep resistance of Inconel 718 fabricated by selective laser melting
L. Y. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: Microstructure and mechanical properties
Xiaoli Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure and mechanical anisotropy of CoCrW alloy processed by selective laser melting
Ho Won Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Predicting the Microstructural Evolution of Electron Beam Melting of Alloy 718 with Phase-Field Modeling
Chamara Kumara et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Quality monitoring in wire-arc additive manufacturing based on cooperative awareness of spectrum and vision
Zhuang Zhao et al.
OPTIK (2019)
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Ross Cunningham et al.
SCIENCE (2019)
Modelling of selective laser melting process with adaptive remeshing
K. Khan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review
Alberta Aversa et al.
MATERIALS (2019)
Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
M. J. Bermingham et al.
ACTA MATERIALIA (2019)
Machine learning-based image processing for on-line defect recognition in additive manufacturing
Alessandra Caggiano et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Evaluation of surface/interface quality, microstructure and mechanical properties of hybrid additive-subtractive aluminium parts
Debajyoti Bhaduri et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Dongdong Gu et al.
COMPOSITES PART B-ENGINEERING (2019)
Deep learning-based tensile strength prediction in fused deposition modeling
Jianjing Zhang et al.
COMPUTERS IN INDUSTRY (2019)
Wire-arc additive manufacturing H13 part: 3D pore distribution, microstructural evolution, and mechanical performances
Jinguo Ge et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
The influence of process parameters on vertical surface roughness of the AlSi10Mg parts fabricated by selective laser melting
Tao Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts
Usman Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of build orientation on microstructure, mechanical and corrosion behavior of Inconel 718 processed by selective laser melting
Dafan Du et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Evolution of Microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments
Holly D. Carlton et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Printability of 316 stainless steel
T. Mukherjee et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Dynamics of pore formation during laser powder bed fusion additive manufacturing
Aiden A. Martin et al.
NATURE COMMUNICATIONS (2019)
Enhancement in fatigue performance of metastable austenitic stainless steel through directed energy deposition additive manufacturing
Jerard Gordon et al.
MATERIALS & DESIGN (2019)
Selective laser melting of a high strength Al-Mn-Sc alloy: Alloy design and strengthening mechanisms
Qingbo Jia et al.
ACTA MATERIALIA (2019)
Selective laser melting enabled additive manufacturing of Ti-22Al-25Nb intermetallic: Excellent combination of strength and ductility, and unique microstructural features associated
Y. H. Zhou et al.
ACTA MATERIALIA (2019)
Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response
Rongpei Shi et al.
JOM (2019)
Microstructures and mechanical properties of laser additive manufactured Al-5Si-1Cu-Mg alloy with different layer thicknesses
Jing Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
Wenhui Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Enhanced strength and ductility in thin Ti-6Al-4V alloy components by alternating the thermal cycle strategy during plasma arc additive manufacturing
Jianjun Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Scientific, technological and economic issues in metal printing and their solutions
T. DebRoy et al.
NATURE MATERIALS (2019)
Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
W. H. Yu et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Effect of heat treatment on the high temperature fatigue life of single crystalline nickel base superalloy additively manufactured by means of selective electron beam melting
Carla Meid et al.
SCRIPTA MATERIALIA (2019)
Conditions for void formation in friction stir welding from machine learning
Yang Du et al.
NPJ COMPUTATIONAL MATERIALS (2019)
Applying Neural-Network-Based Machine Learning to Additive Manufacturing: Current Applications, Challenges, and Future Perspectives
Xinbo Qi et al.
ENGINEERING (2019)
Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys
Paraskevas Kontis et al.
ACTA MATERIALIA (2019)
Assessing printability maps in additive manufacturing of metal alloys
Luke Johnson et al.
ACTA MATERIALIA (2019)
Deep Learning for In Situ and Real-Time Quality Monitoring in Additive Manufacturing Using Acoustic Emission
Sergey A. Shevchik et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)
Microstructural evolution and chemical corrosion of electron beam wire-feed additively manufactured AISI 304 stainless steel
S. Yu Tarasov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Competitive grain growth and dendrite morphology evolution in selective laser melting of Inconel 718 superalloy
Yachao Wang et al.
JOURNAL OF CRYSTAL GROWTH (2019)
Deep Learning of Variant Geometry in Layerwise Imaging Profiles for Additive Manufacturing Quality Control
Farhad Imani et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Influence of selective laser melting process parameters on texture evolution in pure copper
S. D. Jadhav et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Selective laser melting under the reactive atmosphere: A convenient and efficient approach to fabricate ultrahigh strength commercially pure titanium without sacrificing ductility
D. W. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials
D. Buerger et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Comparison of carbon-based reinforcement on laser aided additive manufacturing Inconel 625 composites
Baicheng Zhang et al.
APPLIED SURFACE SCIENCE (2019)
Numerical simulation of the impact of laying powder on selective laser melting single-pass formation
Liu Cao
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Mechanical behaviors of SLM additive manufactured octet-truss and truncated-octahedron lattice structures with uniform and taper beams
Dexing Qi et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Finite element analysis of melt pool thermal characteristics with passing laser in SLM process
M. Majeed et al.
OPTIK (2019)
Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness
Rushikesh Sabban et al.
ACTA MATERIALIA (2019)
Decision Tree Methods for Predicting Surface Roughness in Fused Deposition Modeling Parts
Juan M. Barrios et al.
MATERIALS (2019)
Selective Laser Melting to Manufacture In Situ Metal Matrix Composites: A Review
Sasan Dadbakhsh et al.
ADVANCED ENGINEERING MATERIALS (2019)
Functionally Graded Materials through robotics-inspired path planning
O. V. Eliseeva et al.
MATERIALS & DESIGN (2019)
In situ formation of uniformly dispersed Al4C3 nanorods during additive manufacturing of graphene oxide/Al mixed powders
Weiwei Zhou et al.
CARBON (2019)
Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
Bandar AlMangour et al.
COMPOSITES PART B-ENGINEERING (2019)
Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys
J. S. Zuback et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Data-driven evaluation of fatigue performance of additive manufactured parts using miniature specimens
H. Y. Wan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Mechanism of high yield strength and yield ratio of 316 L stainless steel by additive manufacturing
Y. J. Yin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Simulation of TTT Curves for Additively Manufactured Inconel 625
G. Lindwall et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Rapid prediction of real-time thermal characteristics, solidification parameters and microstructure in laser directed energy deposition (powder-fed additive manufacturing)
Yuze Huang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Convolutional neural network-based inspection of metal additive manufacturing parts
Binbin Zhang et al.
RAPID PROTOTYPING JOURNAL (2019)
The effect of powder oxidation on defect formation in laser additive manufacturing
Chu Lun Alex Leung et al.
ACTA MATERIALIA (2019)
The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
Shang Sui et al.
ACTA MATERIALIA (2019)
Fault Diagnosis in the Field of Additive Manufacturing (3D Printing) Using Bayesian Networks
Abdelkabir Bacha et al.
INTERNATIONAL JOURNAL OF ONLINE AND BIOMEDICAL ENGINEERING (2019)
A digital twin for rapid qualification of 3D printed metallic components
T. Mukherjee et al.
APPLIED MATERIALS TODAY (2019)
A real-time iterative machine learning approach for temperature profile prediction in additive manufacturing processes
Arindam Paul et al.
2019 IEEE INTERNATIONAL CONFERENCE ON DATA SCIENCE AND ADVANCED ANALYTICS (DSAA 2019) (2019)
Deep Learning for Distortion Prediction in Laser-Based Additive Manufacturing using Big Data
Jack Francis et al.
MANUFACTURING LETTERS (2019)
Gaussian process-based surrogate modeling framework for process planning in laser powder-bed fusion additive manufacturing of 316L stainless steel
Gustavo Tapia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
Johannes A. Koepf et al.
ACTA MATERIALIA (2018)
Machine learning in tolerancing for additive manufacturing
Zuowei Zhu et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Heat and fluid flow in additive manufacturing-Part I: Modeling of powder bed fusion
T. Mukherjee et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Heat and fluid flow in additive manufacturing - Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys
T. Mukherjee et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Residual stresses and distortion in additively manufactured compositionally graded and dissimilar joints
T. Mukherjee et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Numerical investigation of effects of nucleation mechanisms on grain structure in metal additive manufacturing
Xuxiao Li et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
A parallelized three-dimensional cellular automaton model for grain growth during additive manufacturing
Yanping Lian et al.
COMPUTATIONAL MECHANICS (2018)
Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing
Xingwang Bai et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
A numerical investigation on the physical mechanisms of single track defects in selective laser melting
C. Tang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Trace Carbon Addition to Refine Microstructure and Enhance Properties of Additive-Manufactured Ti-6Al-4V
S. Mereddy et al.
JOM (2018)
Predicting Microstructure Evolution During Directed Energy Deposition Additive Manufacturing of Ti-6Al-4V
Cengiz Baykasoglu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Porosity prediction: Supervised-learning of thermal history for direct laser deposition
Mojtaba Khanzadeh et al.
JOURNAL OF MANUFACTURING SYSTEMS (2018)
A Knowledge Management System to Support Design for Additive Manufacturing Using Bayesian Networks
Yuanbin Wang et al.
JOURNAL OF MECHANICAL DESIGN (2018)
A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium
K. S. Derekar
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
C. Koerner et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
A Computational Study on Porosity Evolution in Parts Produced by Selective Laser Melting
J. L. Tan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Additive manufacturing of biomaterials
Susmita Bose et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Microstructural characteristic and mechanical property of Ti6Al4V alloy fabricated by selective laser melting
Beibei He et al.
VACUUM (2018)
Laser Direct Metal Deposition of 2024 Al Alloy: Trace Geometry Prediction via Machine Learning
Fabrizia Caiazzo et al.
MATERIALS (2018)
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
Zhongji Sun et al.
NPG ASIA MATERIALS (2018)
Digital Twin and Big Data Towards Smart Manufacturing and Industry 4.0: 360 Degree Comparison
Qinglin Qi et al.
IEEE ACCESS (2018)
Integration of physically-based and data-driven approaches for thermal field prediction in additive manufacturing
Jingran Li et al.
MATERIALS & DESIGN (2018)
A sensitivity analysis of the columnar-to-equiaxed transition for Ni-based superalloys in electron beam additive manufacturing
M. Haines et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
MLCPM: A process monitoring framework for 3D metal printing in industrial scale
Mohammadhossein Amini et al.
COMPUTERS & INDUSTRIAL ENGINEERING (2018)
Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing
W. Ou et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Machine-Learning-Based Monitoring of Laser Powder Bed Fusion
Bodi Yuan et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
Online Monitoring Based on Temperature Field Features and Prediction Model for Selective Laser Sintering Process
Zhehan Chen et al.
APPLIED SCIENCES-BASEL (2018)
Imaging Material Texture of As-Deposited Selective Laser Melted Parts Using Spatially Resolved Acoustic Spectroscopy
Rikesh Patel et al.
APPLIED SCIENCES-BASEL (2018)
Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
T. Mukherjee et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing
Zhipeng Zhou et al.
MATERIALS & DESIGN (2018)
Prediction of microstructure, residual stress, and deformation in laser powder bed fusion process
Y. P. Yang et al.
COMPUTATIONAL MECHANICS (2018)
Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks
Brian L. Decost et al.
JOM (2017)
Laser Metal Deposition Additive Manufacturing of TiC Reinforced Inconel 625 Composites: Influence of the Additive TiC Particle and Its Starting Size
Dongdong Gu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Combinatorial Alloy Design by Laser Additive Manufacturing
Helene Knoll et al.
STEEL RESEARCH INTERNATIONAL (2017)
Accelerated process optimization for laser-based additive manufacturing by leveraging similar prior studies
Amir M. Aboutaleb et al.
IISE TRANSACTIONS (2017)
Real-Time Composition Monitoring Using Support Vector Regression of Laser-Induced Plasma for Laser Additive Manufacturing
Lijun Song et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)
Open-source wire and arc additive manufacturing system: formability, microstructures, and mechanical properties
X. Lu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel
Zhengtao Gan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Experimental optimization of laser additive manufacturing process of single-crystal nickel-base superalloys by a statistical experiment design method
Yao-Jian Liang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Classifying the Dimensional Variation in Additive Manufactured Parts From Laser-Scanned Three-Dimensional Point Cloud Data Using Machine Learning Approaches
M. Samie Tootooni et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Selective laser melting of TiB2/H13 steel nanocomposites: Influence of hot isostatic pressing post-treatment
Bandar AlMangour et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Microstructure and mechanical properties of Al10SiMg fabricated by pulsed laser powder bed fusion
R. Chou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing
M. S. Pham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Evolution of Texture from a Single Crystal Ti-6Al-4V Substrate During Electron Beam Directed Energy Deposition
Todd M. Butler et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Design for additive manufacturing with site-specific properties in metals and alloys
S. Tammas-Williams et al.
SCRIPTA MATERIALIA (2017)
Mitigation of thermal distortion during additive manufacturing
T. Mukherjee et al.
SCRIPTA MATERIALIA (2017)
Applications of artificial intelligence in intelligent manufacturing: a review
Bo-hu Li et al.
FRONTIERS OF INFORMATION TECHNOLOGY & ELECTRONIC ENGINEERING (2017)
Microstructural control during laser additive manufacturing of single-crystal nickel-base superalloys: New processing-microstructure maps involving powder feeding
Yao-Jian Liang et al.
MATERIALS & DESIGN (2017)
Additive manufacturing-assisted conformal cooling channels in mold manufacturing processes
Mahesh S. Shinde et al.
ADVANCES IN MECHANICAL ENGINEERING (2017)
An improved prediction of residual stresses and distortion in additive manufacturing
T. Mukherjee et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Characterizing powder materials using keypoint-based computer vision methods
Brian L. DeCost et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
A Framework of Energy Consumption Modelling for Additive Manufacturing Using Internet of Things
Jian Qin et al.
MANUFACTURING SYSTEMS 4.0 (2017)
Localized melt-scan strategy for site specific control of grain size and primary dendrite arm spacing in electron beam additive manufacturing
Narendran Raghavan et al.
ACTA MATERIALIA (2017)
Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys
Trevor Keller et al.
ACTA MATERIALIA (2017)
Building blocks for a digital twin of additive manufacturing
G. L. Knapp et al.
ACTA MATERIALIA (2017)
Modeling of additive manufacturing processes for metals: Challenges and opportunities
M. M. Francois et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Orthotropic k-nearest foams for additive manufacturing
Jonas Martinez et al.
ACM TRANSACTIONS ON GRAPHICS (2017)
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Theron M. Rodgers et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility
X. P. Li et al.
ACTA MATERIALIA (2017)
Process-Structure Linkages Using a Data Science Approach: Application to Simulated Additive Manufacturing Data
Evdokia Popova et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2017)
Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: Experimental characterization and thermodynamic calculations
Lourdes D. Bobbio et al.
ACTA MATERIALIA (2017)
Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy
H. L. Wei et al.
ACTA MATERIALIA (2017)
Metallurgy of high-silicon steel parts produced using Selective Laser Melting
Michele Garibaldi et al.
ACTA MATERIALIA (2016)
Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
Jyoti Suryawanshi et al.
ACTA MATERIALIA (2016)
Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
Zhuqing Wang et al.
ACTA MATERIALIA (2016)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
A coupled Cellular Automaton-Lattice Boltzmann model for grain structure simulation during additive manufacturing
Abha Rai et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part
Donghong Ding et al.
COMPUTER-AIDED DESIGN (2016)
Data mining and statistical inference in selective laser melting
Chandrika Kamath
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on β-grain refinement and texture modification in Ti-6Al-4V
J. Donoghue et al.
MATERIALS CHARACTERIZATION (2016)
Grain structure evolution in Inconel 718 during selective electron beam melting
H. Helmer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization
Amrita Basak et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Modelling and optimization of laser polishing of additive laser manufacturing surfaces
Benoit Rosa et al.
RAPID PROTOTYPING JOURNAL (2016)
Multiprocess 3D printing for increasing component functionality
Eric MacDonald et al.
SCIENCE (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
Printability of alloys for additive manufacturing
T. Mukherjee et al.
SCIENTIFIC REPORTS (2016)
A criterion for cracking during solidification
Sindo Kou
ACTA MATERIALIA (2015)
Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
Markus Ramsperger et al.
ADVANCED ENGINEERING MATERIALS (2015)
Phase-Field Modeling of Microstructure Evolution in Electron Beam Additive Manufacturing
Xibing Gong et al.
JOM (2015)
Machine learning: Trends, perspectives, and prospects
M. I. Jordan et al.
SCIENCE (2015)
Evolution of solidification texture during additive manufacturing
H. L. Wei et al.
SCIENTIFIC REPORTS (2015)
Design for Metallic Additive Manufacturing Machine with Capability for Certify as You build
Jyoti Mazumder
CIRP 25TH DESIGN CONFERENCE INNOVATIVE PRODUCT CREATION (2015)
Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy
Pulin Nie et al.
ACTA MATERIALIA (2014)
Functionally Graded Alloys Obtained by Additive Manufacturing
Thomas Niendorf et al.
ADVANCED ENGINEERING MATERIALS (2014)
Phase field investigation of dendrite growth in the welding pool of aluminum alloy 2A14 under transient conditions
W. J. Zheng et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Progress Toward an Integration of Process-Structure-Property-Performance Models for Three-Dimensional (3-D) Printing of Titanium Alloys
P. C. Collins et al.
JOM (2014)
Heat transfer and material flow during laser assisted multi-layer additive manufacturing
V. Manvatkar et al.
JOURNAL OF APPLIED PHYSICS (2014)
Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis
Jun Xiong et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2014)
A comparative study of microstructure and mechanical behavior of CO2 and diode laser deposited Cu-38Ni alloy
Sudip Bhattacharya et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods
Alexander Klassen et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
A Microstructure Evolution Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part II)
Ranadip Acharya et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
A Coupled Thermal, Fluid Flow, and Solidification Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part I)
Ranadip Acharya et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Douglas C. Hofmann et al.
SCIENTIFIC REPORTS (2014)
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Lore Thijs et al.
ACTA MATERIALIA (2013)
Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti-6Al-4V by selective electron beam melting
A. A. Antonysamy et al.
MATERIALS CHARACTERIZATION (2013)
Texture control during laser deposition of nickel-based superalloy
G. P. Dinda et al.
SCRIPTA MATERIALIA (2012)
Evolution of microstructure in laser deposited Al-11.28%Si alloy
G. P. Dinda et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Microstructure and properties of laser clad coatings studied by orientation imaging microscopy
V. Ocelik et al.
ACTA MATERIALIA (2010)
Phase field method
R. S. Qin et al.
MATERIALS SCIENCE AND TECHNOLOGY (2010)
Transport phenomena during direct metal deposition
X. He et al.
JOURNAL OF APPLIED PHYSICS (2007)
Direct laser deposition of alloys from elemental powder blends
KI Schwendner et al.
SCRIPTA MATERIALIA (2001)
Overview -: Residual stress part 2 -: Nature and origins
PJ Withers et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
分享论文
