期刊
MATERIALS & DESIGN
卷 194, 期 -, 页码 -出版社
ELSEVIER SCI LTD
DOI: 10.1016/j.matdes.2020.108937
关键词
High speed sintering; Additive manufacturing; Porosity; X-ray computed tomography; Powder bed fusion; Polyamide-12
资金
- UK Engineering and Physical Sciences Research Council [EP/P006566/1]
- EPSRC [EP/P006566/1] Funding Source: UKRI
High Speed Sintering is a novel powder-bed fusion Additive Manufacturing technique that uses an infrared lamp to provide intensive thermal energy to sinter polymer powders. The amount of thermal energy is critical to particle coalescence related defects such as porosity. This study investigates the effect of energy input on porosity and the resulting mechanical properties of polyamide-12 parts. Samples were produced at different lamp speeds, generating varying amount of energy input from a low to a high level. They were then scanned using X-ray Computed Tomography technique, following which they were subject to tensile testing. A strong correlation between energy input, porosity and mechanical properties was found, whereby pore formation was fundamentally caused by insufficient energy input. A greater amount of energy input resulted in a reduced porosity level, which in turn led to improved mechanical properties. The porosity, ultimate tensile strength and elongation achieved were 058%, 42.4 MPa and 10.0%, respectively, by using the standard parameters. Further increasing the energy input resulted in the lowest porosity of 0.14% and the highest ultimate tensile strength and elongation of 44.4 MPa and 135%, respectively. Pore morphology, volume, number density and spatial distribution were investigated, which were found to be closely linked with energy input and mechanical properties. (C) 2020 The Authors. Published by Elsevier Ltd.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据