相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Circular Simple Shear Extrusion as an Alternative to Simple Shear Extrusion Technique
A. Rezvani et al.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING (2020)
Analysis of the Bauschinger Effect in Cold Drawn Pearlitic Steels
Jesus Toribio et al.
METALS (2020)
Microstructure and texture characterization of Mg–Al and Mg–Gd binary alloys processed by simple shear extrusion
N. Bayat Tork et al.
Journal of Materials Research and Technology-JMR&T (2019)
Effect of strain reversal on the stress-induced martensitic transformation and tensile properties of a metastable β titanium alloy
Xinkai Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
On the Production of Severely Deformed Workpieces in Large Scales: A Step Towards Industrialization
E. Bagherpour et al.
JOM (2019)
Study on Optimization of Parameters Affecting Simple Shear Extrusion of Pure Copper to Fabricate Fine Grain Structure
Mostafa Balali et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)
The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys
Fritz Appel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and Texture Inhomogeneity after Large Non-Monotonic Simple Shear Strains: Achievements of Tensile Properties
Ebad Bagherpour et al.
METALS (2018)
Influence of strain reversal on dynamic transformation in microalloyed steels deformed above the Ae3 temperature
L. Sun et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Nanostructured pure copper fabricated by simple shear extrusion (SSE): A correlation between microstructure and tensile properties
E. Bagherpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Vickers microhardness and microstructure relationship of Ti-6Al-4V alloy under cyclic forward-reverse torsion and monotonic torsion loading
Xinkai Ma et al.
MATERIALS & DESIGN (2017)
Alternatives for Specimen Manufacturing in Tensile Testing of Steel Plates
D. Martinez Krahmer et al.
EXPERIMENTAL TECHNIQUES (2016)
Microstructure quantification of ultrafine grained pure copper fabricated by simple shear extrusion (SSE) technique
E. Bagherpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure evolution of pure copper during a single pass of simple shear extrusion (SSE): role of shear reversal
E. Bagherpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Texture formation in metal alloys with cubic crystal structures
L. A. I. Kestens et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Texture Changes during Simple Shear Extrusion (SSE) Processing of Pure Copper
E. Bagherpour et al.
MATERIALS TRANSACTIONS (2016)
Effect of compression-tension loading reversal on the strain to fracture of dual phase steel sheets
Stephane J. Marcadet et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
On the interactions between strain path reversal and dynamic recrystallisation in 316L stainless steel studied by hot torsion
L. Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Investigation on the feasibility of room temperature plastic deformation of pure magnesium by simple shear extrusion process
N. Bayat Tork et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Anomalous Plasticity in the Cyclic Torsion of Micron Scale Metallic Wires
Dabiao Liu et al.
PHYSICAL REVIEW LETTERS (2013)
Processing twining induced plasticity steel through simple shear extrusion
E. Bagherpour et al.
MATERIALS & DESIGN (2012)
The origin of strain reversal texture in equal channel angular pressing
C. F. Gu et al.
ACTA MATERIALIA (2011)
Reversible nature of shear bands in copper single crystals subjected to iterative shear of ECAP in forward and reverse directions
Hiroyuki Miyamoto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Microstructure development and hardening during high pressure torsion of commercially pure aluminium: Strain reversal experiments and a dislocation based model
Jiuwen Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Direct observation of twinning-detwinning-retwinning on magnesium single crystal subjected to strain-controlled cyclic tension-compression in [0001] direction
Qin Yu et al.
PHILOSOPHICAL MAGAZINE LETTERS (2011)
Effect of strain reversal on texture and grain refinement in route C equal channel angular pressed copper
C. F. Gu et al.
SCRIPTA MATERIALIA (2011)
Significance of strain reversals in a two-phase alloy processed by high-pressure torsion
Megumi Kawasaki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of the strain reversal on austenite-ferrite phase transformation in a Nb-microalloyed steel
J. L. Lanzagorta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Quantification of internal dislocation density using scanning transmission electron microscopy in ultrafine grained pure aluminium fabricated by severe plastic deformation
Yoji Miyajima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Different processing routes for deformation via simple shear extrusion (SSE)
N. Pardis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Role of strain reversal in grain refinement by severe plastic deformation
Dmitry Orlov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Deformation behavior in Simple Shear Extrusion (SSE) as a new severe plastic deformation technique
N. Pardis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Texture evolution in pure aluminum subjected to monotonous and reversal straining in high-pressure torsion
Dmitry Orlov et al.
SCRIPTA MATERIALIA (2009)
The significance of strain reversals during processing by high-pressure torsion
Megumi Kawasaki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Effect of strain path in high-pressure torsion process on hardening in commercial purity titanium
Yoshikazu Todaka et al.
MATERIALS TRANSACTIONS (2008)
Work-hardening model for polycrystalline metals under strain reversal at large strains
E. F. Rauch et al.
ACTA MATERIALIA (2007)
Microstructure and texture evolution during equal channel angular extrusion of interstitial-free steel: Effects of die angle and processing route
Saiyi Li et al.
ACTA MATERIALIA (2007)
A quantitative model of grain refinement and strain hardening during severe plastic deformation
H. Petryk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
The effect of strain-path reversal on cavitation during hot torsion of Ti-6Al-4V
P. D. Nicolaou et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Evolution of crystallographic texture during equal channel angular extrusion of copper:: The role of material variables
S Suwas et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Texture evolution during equal channel angular extrusion: Effect of initial texture from experiment and simulation
SY Li et al.
SCRIPTA MATERIALIA (2005)
Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear
S Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Texture evolution during equal channel angular extrusion Part I. Effect of route, number of passes and initial texture
S Ferrasse et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Study of the strain reversal effect on the recrystallization and strain-induced precipitation in a Nb-microalloyed steel
D Jorge-Badiola et al.
ACTA MATERIALIA (2004)
Stacking fault energy and microstructure effects on torsion texture evolution
DA Hughes et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2000)
Measuring the thickness of aluminium alloy thin foils using electron energy loss spectroscopy
A Bardal et al.
MATERIALS CHARACTERIZATION (2000)
分享论文
