相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Development of gradient microstructure in the lattice structure of AlSi10Mg alloy fabricated by selective laser melting
Mulin Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Additive manufacturing of interpenetrating periodic open cellular structures (interPOCS) with in operando adjustable flow characteristics
Giang Do et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)
Yue Du et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Multiscale characterization and constitutive parameters identification of polyamide (PA12) processed via selective laser sintering
Johannes Schneider et al.
POLYMER TESTING (2020)
Multi-material topology optimization of lattice structures using geometry projection
Hesaneh Kazemi et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Investigations on the Mechanical Response of Gradient Lattice Structures Manufactured via SLM
Judyta Sienkiewicz et al.
METALS (2020)
Acoustic absorptions of multifunctional polymeric cellular structures based on triply periodic minimal surfaces fabricated by stereolithography
Wenjing Yang et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
A review on integration of lightweight gradient lattice structures in additive manufacturing parts
Asliah Seharing et al.
ADVANCES IN MECHANICAL ENGINEERING (2020)
Influence of unit cell pose on the mechanical properties of Ti6Al4V lattice structures manufactured by selective laser melting
Long Bai et al.
ADDITIVE MANUFACTURING (2020)
Experimental and numerical investigation of compressive behavior of lattice structures manufactured through projection micro stereolithography
Uzair Ahmed Dar et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Meta-biomaterials
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2020)
Fatigue behavior of Ti-6Al-4V cellular structures fabricated by additive manufacturing technique
Dechun Ren et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Selective laser melting processed Ti6Al4V lattices with graded porosities for dental applications
Zena J. Wally et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Shape and topology optimization considering anisotropic features induced by additive manufacturing processes
Charles Dapogny et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Orientation dependency for microstructure, geometric accuracy and mechanical properties of selective laser melting AlSi10Mg lattices
Zhichao Dong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
CoCr porous scaffolds manufactured via selective laser melting in orthopedics: Topographical, mechanical, and biological characterization
Paolo Caravaggi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
Additive manufacturing of Ti-6Al-4V lattice structures with high structural integrity under large compressive deformation
Kun Yang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
High strain rate mechanical behavior of Ti-6Al-4V octet lattice structures additively manufactured by selective laser melting (SLM)
Sindhura Gangireddy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Dynamic Crushing Analysis of a Three-Dimensional Re-Entrant Auxetic Cellular Structure
Tao Wang et al.
MATERIALS (2019)
A case study: Mechanical modeling optimization of cellular structure fabricated using wood flour-filled polylactic acid composites with fused deposition modeling
Yubo Tao et al.
COMPOSITE STRUCTURES (2019)
Mechanical and in vitro study of an isotropic Ti6Al4V lattice structure fabricated using selective laser melting
Xingchen Yan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
On the fatigue behavior of additive manufactured lattice structures
Ali Zargarian et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Oraib Al-Ketan et al.
ADVANCED ENGINEERING MATERIALS (2019)
A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures
Aamer Nazir et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Stereolithographic 3D Printing-Based Hierarchically Cellular Lattices for High-Performance Quasi-Solid Supercapacitor
Jianzhe Xue et al.
NANO-MICRO LETTERS (2019)
Mechanical properties of lightweight 316L stainless steel lattice structures fabricated by selective laser melting
Tianlin Zhong et al.
MATERIALS & DESIGN (2019)
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
Anton du Plessis et al.
ADDITIVE MANUFACTURING (2019)
Compressive behaviour of Neovius Triply Periodic Minimal Surface cellular structure manufactured by fused deposition modelling
Sohaib Z. Khan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Evaluation of the mechanical compatibility of additively manufactured porous Ti-25Ta alloy for load-bearing implant applications
Nicolas Soro et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Compressive properties and micro-structural characteristics of Ti-6Al-4V fabricated by electron beam melting and selective laser melting
Lijun Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications
Ramin Rahmani et al.
APPLIED SCIENCES-BASEL (2019)
Structure-property relationship in high strength and lightweight AlSi10Mg microlattices fabricated by selective laser melting
Tianyu Yu et al.
MATERIALS & DESIGN (2019)
Impact energy absorption of functionally graded chiral honeycomb structures
Dexing Qi et al.
EXTREME MECHANICS LETTERS (2019)
Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion
S. Catchpole-Smith et al.
ADDITIVE MANUFACTURING (2019)
Additively manufactured porous metallic biomaterials
Amir A. Zadpoor
JOURNAL OF MATERIALS CHEMISTRY B (2019)
Mechanical vibration bandgaps in surface-based lattices
Waiel Elmadih et al.
ADDITIVE MANUFACTURING (2019)
Design of variable thickness triply periodic surfaces for additive manufacturing
Gianpaolo Savio et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Lattice Structure Design and Optimization With Additive Manufacturing Constraints
Yunlong Tang et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2018)
Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing
I. Maskery et al.
POLYMER (2018)
Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting
S. Zhao et al.
ACTA MATERIALIA (2018)
Introducing composite lattice core sandwich structure as an alternative proposal for engine hood
Sha Yin et al.
COMPOSITE STRUCTURES (2018)
Anisotropic porous structure modeling for 3D printed objects
Jianming Ying et al.
COMPUTERS & GRAPHICS-UK (2018)
Infill Optimization for Additive Manufacturing-Approaching Bone-Like Porous Structures
Jun Wu et al.
IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS (2018)
Additively-manufactured functionally graded Ti-6Al-4V lattice structures with high strength under static and dynamic loading: Experiments
Xiao Lijun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Study on the Shape Optimization of Cable-Stiffened Single-Layer Latticed Shells
Hao Wang et al.
INTERNATIONAL JOURNAL OF STEEL STRUCTURES (2018)
The Design Process of Additively Manufactured Mesoscale Lattice Structures: A Review
Francesco Tamburrino et al.
JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING (2018)
Natural Frequency Optimization of Variable-Density Additive Manufactured Lattice Structure: Theory and Experimental Validation
Lin Cheng et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
A Novel Design Method for Nonuniform Lattice Structures Based on Topology Optimization
Yafeng Han et al.
JOURNAL OF MECHANICAL DESIGN (2018)
Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing
Bruno Jette et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Design and analysis of strut-based lattice structures for vibration isolation
Wahyudin P. Syam et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Additive manufacturing of 3D nano-architected metals
Andrey Vyatskikh et al.
NATURE COMMUNICATIONS (2018)
Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting
Fei Liu et al.
MATERIALS (2018)
3D auxetic single material periodic structure with ultra-wide tunable bandgap
Luca D'Alessandro et al.
SCIENTIFIC REPORTS (2018)
Geometric Modeling of Cellular Materials for Additive Manufacturing in Biomedical Field: A Review
Gianpaolo Savio et al.
APPLIED BIONICS AND BIOMECHANICS (2018)
Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing
Guanjun Wang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
Patrick Koehnen et al.
MATERIALS & DESIGN (2018)
Buckling optimization of Kagome lattice cores with free-form trusses
Lei Zhang et al.
MATERIALS & DESIGN (2018)
Evaluation of topology-optimized lattice structures manufactured via selective laser melting
Zefeng Xiao et al.
MATERIALS & DESIGN (2018)
Evolutionary design of nonuniform cellular structures with optimized Poisson's ratio distribution
Yafeng Han et al.
MATERIALS & DESIGN (2018)
Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM
Dheyaa S. J. Al-Saedi et al.
MATERIALS & DESIGN (2018)
The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction
Boqing Zhang et al.
MATERIALS & DESIGN (2018)
Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications
Arash Ataee et al.
MATERIALS & DESIGN (2018)
Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing
Guanjun Wang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting
Lei Yang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Configuration Optimization Design of Ti6Al4V Lattice Structure Formed by SLM
Long Bai et al.
MATERIALS (2018)
Optimal design of three-dimensional non-uniform nylon lattice structures for selective laser sintering manufacturing
Xin Jin et al.
ADVANCES IN MECHANICAL ENGINEERING (2018)
Light-weighting in aerospace component and system design
L. Zhu et al.
PROPULSION AND POWER RESEARCH (2018)
Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing
A. du Plessis et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Optimizing process parameters of fused deposition modeling by Taguchi method for the fabrication of lattice structures
Guoying Dong et al.
ADDITIVE MANUFACTURING (2018)
Design, analysis and manufacturing of lattice structures: an overview
Mark Helou et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2018)
A hybrid finite element analysis and evolutionary computation method for the design of lightweight lattice components with optimized strut diameter
Konstantinos Salonitis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Mechanical characterization and finite element modeling of polylactic acid BCC-Z cellular lattice structures fabricated by fused deposition modeling
R. Rezaei et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2017)
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Guoying Dong et al.
JOURNAL OF MECHANICAL DESIGN (2017)
Uncertainty quantification and validation of 3D lattice scaffolds for computer-aided biomedical applications
Recep M. Gorguluarslan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Plastic analyses of thin-walled steel honeycombs with re-entrant deformation style
Zhongxin Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement
Aniket Ingrole et al.
MATERIALS & DESIGN (2017)
Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials
Mathieu Dumas et al.
MATERIALS & DESIGN (2017)
Optimisation of functionally graded lattice structures using isostatic lines
Stephen Daynes et al.
MATERIALS & DESIGN (2017)
Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties
H. Montazerian et al.
MATERIALS & DESIGN (2017)
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
I Maskery et al.
ADDITIVE MANUFACTURING (2017)
Mechanical low-frequency filter via modes separation in 3D periodic structures
L. D'Alessandro et al.
APPLIED PHYSICS LETTERS (2017)
High-stiffness and strength porous maraging steel via topology optimization and selective laser melting
Akihiro Takezawa et al.
ADDITIVE MANUFACTURING (2017)
Topology Optimization in Aircraft and Aerospace Structures Design
Ji-Hong Zhu et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2016)
Design and properties of 3D scaffolds for bone tissue engineering
S. Gomez et al.
ACTA BIOMATERIALIA (2016)
High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
Sajad Arabnejad et al.
ACTA BIOMATERIALIA (2016)
Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading
Thomas Tancogne-Dejean et al.
ACTA MATERIALIA (2016)
Architected Cellular Materials
Tobias A. Schaedler et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Modeling and experimental verification of an ultra-wide bandgap in 3D phononic crystal
L. D'Alessandro et al.
APPLIED PHYSICS LETTERS (2016)
The equivalent thermal conductivity of lattice core sandwich structure: A predictive model
Xiangmeng Cheng et al.
APPLIED THERMAL ENGINEERING (2016)
Dynamic behaviour of auxetic gradient composite hexagonal honeycombs
L. Boldrin et al.
COMPOSITE STRUCTURES (2016)
Energy absorption in lattice structures in dynamics: Experiments
Zuhal Ozdemir et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Mechanical performance of hollow tetrahedral truss cores
Eric C. Clough et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Design and Analysis of Lattice Structures for Additive Manufacturing
Christiane Beyer et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting
S. Zhao et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Optimal lattice-structured materials
Mark C. Messner
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Periodic truss structures
Frank W. Zok et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures
A. Zargarian et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Elastic modulus of 316 stainless steel lattice structure fabricated via binder jetting process
Y. Tang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
A survey of the design methods for additive manufacturing to improve functional performance
Yunlong Tang et al.
RAPID PROTOTYPING JOURNAL (2016)
Strength analysis and modeling of cellular lattice structures manufactured using selective laser melting for tooling applications
Rasoul Mahshid et al.
MATERIALS & DESIGN (2016)
A method to design biomimetic scaffolds for bone tissue engineering based on Voronoi lattices
M. Fantini et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Elastic properties of chiral, anti-chiral, and hierarchical honeycombs: A simple energy-based approach
Davood Mousanezhad et al.
THEORETICAL AND APPLIED MECHANICS LETTERS (2016)
Design of Highly Porous Hydroxyapatite Scaffolds by Conversion of 3D Printed Gypsum Structures - a Comparison Study
Alan C. S. Dantas et al.
SECOND CIRP CONFERENCE ON BIOMANUFACTURING (2016)
Cellular lattices of biomedical Co-Cr-Mo-alloy fabricated by electron beam melting with the aid of shape optimization
Yuichiro Koizumi et al.
ADDITIVE MANUFACTURING (2016)
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Anders Clausen et al.
ADVANCED MATERIALS (2015)
Bidirectional Evolutionary Structural Optimization (BESO) based design method for lattice structure to be fabricated by additive manufacturing
Yunlong Tang et al.
COMPUTER-AIDED DESIGN (2015)
Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing
Li Yang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Mechanical response of Ti-6Al-4V octet-truss lattice structures
Liang Dong et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Fatigue properties of a dental implant produced by electron beam melting® (EBM)
M. Jamshidinia et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Efficient Design-Optimization of Variable-Density Hexagonal Cellular Structure by Additive Manufacturing: Theory and Validation
Pu Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Mechanical properties in tensile loading of H13 re-entrant honeycomb auxetic structure manufactured by direct metal deposition
Sohaib Z. Khan et al.
2015 2ND INTERNATIONAL CONFERENCE ON MECHATRONICS AND MECHANICAL ENGINEERING (ICMME 2015) (2015)
Ultra-strong architected Cu meso-lattices
X. Wendy Gu et al.
EXTREME MECHANICS LETTERS (2015)
Build-to-Last: Strength to Weight 3D Printed Objects
Lin Lu et al.
ACM TRANSACTIONS ON GRAPHICS (2014)
Influence of cell shape on mechanical properties of Ti-6Al-4V meshes fabricated by electron beam melting method
S. J. Li et al.
ACTA BIOMATERIALIA (2014)
Designing Metallic Microlattices for Energy Absorber Applications
Tobias A. Schaedler et al.
ADVANCED ENGINEERING MATERIALS (2014)
Mechanical properties of a hollow-cylindrical-joint honeycomb
Qiang Chen et al.
COMPOSITE STRUCTURES (2014)
Application and future of solid foams
Yves Bienvenu
COMPTES RENDUS PHYSIQUE (2014)
Damping and low-velocity impact behavior of filled composite pyramidal lattice structures
Sha Yin et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering
Chunze Yan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Design of materials with prescribed nonlinear properties
F. Wang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
High-strength cellular ceramic composites with 3D microarchitecture
Jens Bauer et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
Stiffest elastic networks
Gerald Gurtner et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2014)
Review of Mechanics and Applications of Auxetic Structures
Mariam Mir et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2014)
Application of 3D Printing Technology for Designing Light-weight Unmanned Aerial Vehicle Wing Structures
Seung Ki Moon et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2014)
Free vibration analysis and optimization of composite lattice truss core sandwich beams with interval parameters
Menghui Xu et al.
COMPOSITE STRUCTURES (2013)
Pyramidal Lattice Structures for High Strength and Energy Absorption
C. I. Hammetter et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2013)
Auxetic honeycombs with lossy polymeric infills for high damping structural materials
Gabriel J. Murray et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2013)
Advanced lattice support structures for metal additive manufacturing
Ahmed Hussein et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Topology optimization of functionally graded cellular materials
A. Radman et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Mechanical characterization of polyamide cellular structures fabricated using selective laser sintering technologies
A. Cerardi et al.
MATERIALS & DESIGN (2013)
Heuristic Optimization Method for Cellular Structure Design of Light Weight Components
Jason Nguyen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
Anisogrid composite lattice structures - Development and aerospace applications
V. V. Vasiliev et al.
COMPOSITE STRUCTURES (2012)
Multifunctional heat exchangers derived from three-dimensional micro-lattice structures
Kevin J. Maloney et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Evaluations of cellular lattice structures manufactured using selective laser melting
Chunze Yan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Modeling and simulation of relaxation in viscoelastic open cell materials and structures
H. E. Pettermann et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Polymer-filled honeycombs to achieve a structural material with appreciable damping
Gabriel Murray et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2012)
Non-stochastic Ti-6Al-4V foam structures with negative Poisson's ratio
Li Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Free vibration analysis of simply supported sandwich beams with lattice truss core
Jia Lou et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2012)
Overview of current additive manufacturing technologies and selected applications
Timothy J. Horn et al.
SCIENCE PROGRESS (2012)
Fluid Dynamics of Flow Through Microscale Lattice Structures Formed from Self-Propagating Photopolymer Waveguides
Kathryn D. Fink et al.
AICHE JOURNAL (2011)
Minimal surface scaffold designs for tissue engineering
Sebastian C. Kapfer et al.
BIOMATERIALS (2011)
A Gradient Cellular Core for Aeroengine Fan Blades Based on Auxetic Configurations
C. Lira et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2011)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
The in-plane linear elastic constants and out-of-plane bending of 3-coordinated ligament and cylinder-ligament honeycombs
A. Alderson et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Concepts for enhanced energy absorption using hollow micro-lattices
A. G. Evans et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Jayanthi Parthasarathy et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2010)
Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays
L. E. Murr et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
Optimal design of composite lattice shell structures for aerospace applications
G. Totaro et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2009)
Transverse elastic shear of auxetic multi re-entrant honeycombs
C. Lira et al.
COMPOSITE STRUCTURES (2009)
Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
Peter Heinl et al.
ACTA BIOMATERIALIA (2008)
Smart shape memory alloy chiral honeycomb
M. R. Hassan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Mechanical properties of an extruded pyramidal lattice truss sandwich structure
Douglas T. Queheillalt et al.
SCRIPTA MATERIALIA (2008)
A post-treatment of the homogenization method for shape optimization
O. Pantz et al.
SIAM JOURNAL ON CONTROL AND OPTIMIZATION (2008)
A variational level set approach for surface area minimization of triply-periodic surfaces
Y. Jung et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2007)
Periodic surface modeling for computer aided nano design
Yan Wang
COMPUTER-AIDED DESIGN (2007)
Lattice truss structures from expanded metal sheet
Gregory W. Kooistra et al.
MATERIALS & DESIGN (2007)
Elastic buckling of hexagonal chiral cell honeycombs
F. Scarpa et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Anisogrid composite lattice structures for spacecraft and aircraft applications
V. V. Vasiliev et al.
COMPOSITE STRUCTURES (2006)
Optimal active cooling performance of metallic sandwich panels with prismatic cores
L. Valdevit et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Multifunctional periodic cellular metals
HNG Wadley
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
The properties of foams and lattices
MF Ashby
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
Creation of a unit block library of architectures for use in assembled scaffold engineering
MA Wettergreen et al.
COMPUTER-AIDED DESIGN (2005)
Cellular metal lattices with hollow trusses
DT Queheillalt et al.
ACTA MATERIALIA (2005)
Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium
GW Kooistra et al.
ACTA MATERIALIA (2004)
Field vibration mitigation by honeycomb WIB for pile foundations of a high-speed train viaduct
H Takemiya
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2004)
Simulated properties of Kagome and tetragonal truss core panels
S Hyun et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Impact damage of partially foam-filled co-injected honeycomb core sandwich composites
UK Vaidya et al.
JOURNAL OF COMPOSITE MATERIALS (2003)
Effective properties of the octet-truss lattice material
VS Deshpande et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Foam topology bending versus stretching dominated architectures
VS Deshpande et al.
ACTA MATERIALIA (2001)
Nodal surface approximations to the P, G, D and I-WP triply periodic minimal surfaces
PJF Gandy et al.
CHEMICAL PHYSICS LETTERS (2001)
Topology optimization: a tool for the tailoring of structures and materials
O Sigmund
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2000)
分享论文
