期刊
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
卷 8, 期 43, 页码 16104-16114出版社
AMER CHEMICAL SOC
DOI: 10.1021/acssuschemeng.0c01006
关键词
Li-ion battery; end-of-life Li-ion battery; recycle; ascorbic acid leaching; oxalic acid coprecipitation
资金
- USAID through Sustainable Higher Education Research Alliances (SHERA) Program Centre for Collaborative (CCR) National Center for Sustainable Transportation Technology (NCSTT)
- Ministry of Research and Technology/National Agency for Research and Innovation through Post-Doctoral Research Program
- Indonesian Ministry of Research and Technology/National Agency for Research and Innovation
- Indonesian Ministry of Education and Culture under World Class University (WCU) Program
- Indonesia Endowment Fund for Education (LPDP) of the Ministry of Finance of Indonesia
One of the emerging issues in solving the electronic waste problem is to address the growing amount of end-of-life Li-ion battery (LIB) waste. In this work, the regeneration of LiNi1/3Co1/3Mn1/3O2 (NCM 111) cathode active materials from end-of-life LIBs was successfully carried out via an easy, fast, and environmentally friendly recycling process that comprised three main stages, i.e., ascorbic acid leaching, oxalate coprecipitation process, and heat treatment. Ascorbic acid was able to leach Li, Ni, Co, and Mn ions from the spent NCM 111 cathode material with a relatively high leaching efficiency up to 90%. The following oxalic acid coprecipitation method has effectively recovered the transition metal ions in the leachate in the form of the metal oxalates MC2O4 center dot 2H(2)O (M = Ni, Mn, and Co), as confirmed by the result of X-ray diffraction characterization. The quantitative analysis of metal ions using X-ray fluorescence revealed that the ratio of Ni, Co, and Mn in the precipitate was approximately 1:1:1, with a slightly lower amount of Mn. Regeneration of NCM 111 via the heat treatment of metal oxalates at temperatures of 800-950 degrees C successfully reproduced the material (R-NCM) with an R3m hexagonal-layered structure, which could be reemployed as the cathode in LIBs. Charge-discharge characterization of the as-fabricated LIB at 2.5-4.3 V revealed that the battery with the R-NCM cathode synthesized at 900 degrees C exhibited a slightly higher initial specific discharge capacity (164.9 mAh/g at 0.2 C) than that of commercial NCM (157.4 mAh/g at 0.2 C). Moreover, the Li-ion battery also showed a very stable performance with a capacity retention of 91.3% after 100 cycles at 0.2 C.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据