相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。The future of UK plastics recycling: One Bin to Rule Them All
Martin Burgess et al.
RESOURCES CONSERVATION AND RECYCLING (2021)
Green product development under competition: A study of the fashion apparel industry
Shu Guo et al.
EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2020)
Future trends of plastic bottle recycling: Compatibilization of PET and PLA
D. Gere et al.
POLYMER TESTING (2020)
Use of recycled materials as mid layer in three layered structures-new possibility in design for recycling
Tanja Radusin et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Physical and Thermal Properties of High-Density Polyethylene Film Modified with Polypropylene and Linear Low-Density Polyethylene
Weili Wu et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2020)
Twenty Years of the Polyvinyl Chloride Sustainability Challenges
Mark Everard
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2020)
The environmental benefits of improving packaging waste collection in Europe
C. W. Tallentire et al.
WASTE MANAGEMENT (2020)
Beyond Mechanical Recycling: Giving New Life to Plastic Waste
Ina Vollmer et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)
Introducing four different branch structures in PET by reactive processing--A rheological investigation
Hossein Arayesh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Profluorescent nitroxide sensors for monitoring the natural aging of polymer materials
Vanessa C. Lussini et al.
POLYMER DEGRADATION AND STABILITY (2020)
Design from recycling: A complex mixed plastic waste case study
Kim Ragaert et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Microstructural Contributions of Different Polyolefins to the Deformation Mechanisms of Their Binary Blends
Astrid Van Belle et al.
POLYMERS (2020)
Current State and Perspectives Related to the Polyethylene Terephthalate Hydrolases Available for Biorecycling
Fusako Kawai et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
COVID-19 Pandemic Repercussions on the Use and Management of Plastics
Joana C. Prata et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)
Plastic rain in protected areas of the United States
Janice Brahney et al.
SCIENCE (2020)
Compatibilization of iPP/HDPE Blends with PE-g-iPP Graft Copolymers
Kristine Klimovica et al.
ACS MACRO LETTERS (2020)
Rethinking and optimising plastic waste management under COVID-19 pandemic: Policy solutions based on redesign and reduction of single-use plastics and personal protective equipment
Ana L. Patricio Silva et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Dissolution and recovery of waste expanded polystyrene using alternative essential oils
Nadia D. Gil-Jasso et al.
FUEL (2019)
Enhanced PET processing with organophosphorus additive: Flame retardant products with added-value for recycling
Ali Gooneie et al.
POLYMER DEGRADATION AND STABILITY (2019)
A heuristic method for modeling the initial pressure drop in melt filtration using woven screens in polymer recycling
Sophie Pachner et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Effects of Phase Morphology on Mechanical Properties: Oriented/Unoriented PP Crystal Combination with Spherical/Microfibrillar PET Phase
Dashan Mi et al.
POLYMERS (2019)
Current knowledge on enzymatic PET degradation and its possible application to waste stream management and other fields
Fusako Kawai et al.
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2019)
Preparation of long-chain branched poly(ethylene terephthalate): Molecular entanglement structure and toughening mechanism
Juan Liu et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Structural Changes Undergone During Thermal Aging and/or Processing of Unstabilized, Dry-blend and Rigid PVC, Investigated by FTIR-ATR and Curve Fitting
Zineb Hadj Amar et al.
ANNALES DE CHIMIE-SCIENCE DES MATERIAUX (2019)
Low-density polyethylene/curcumin melt extruded composites with enhanced water vapor barrier and antioxidant properties for active food packaging
Jasim Zia et al.
POLYMER (2019)
Thermal and UV aging of polypropylene stabilized by wine seeds wastes and their extracts
A. Nanni et al.
POLYMER DEGRADATION AND STABILITY (2019)
Plastic waste from recycling centres: Characterisation and evaluation of plastic recyclability
Giorgia Faraca et al.
WASTE MANAGEMENT (2019)
Anti-/Pro-Oxidant Behavior of Naturally Occurring Molecules in Polymers and Biopolymers: A Brief Review
Nadka Tz. Dintcheva et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Structural stabilizing effect of SEBSgMAH on a PP-PET blend for multiple mechanical recycling
Karen Van Kets et al.
POLYMER DEGRADATION AND STABILITY (2019)
Toxic phthalate-free and highly plasticized polyvinyl chloride materials from non-timber forest resources in plantation
Puyou Jia et al.
REACTIVE & FUNCTIONAL POLYMERS (2019)
Closing the loop for PET, PE and PP waste from households: Influence of material properties and product design for plastic recycling
M. K. Eriksen et al.
WASTE MANAGEMENT (2019)
Degradation of PVC waste into a flexible polymer by chemical modification using DINP moieties
Lihui Lu et al.
RSC ADVANCES (2019)
Block copolymer-based porous carbons for supercapacitors
Tianyu Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Efficiency of Different Chain-Linking Agents in the Synthesis of Long-Chain Branched Polypropylene: Molecular, Thermal, and Rheological Characterization
Jorge Guapacha et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)
Barriers to the Circular Economy: Evidence From the European Union (EU)
Julian Kirchherr et al.
ECOLOGICAL ECONOMICS (2018)
Investigation of the primary plasticisers present in polyvinyl chloride (PVC) products currently authorised as food contact materials
Katherine S. Carlos et al.
FOOD ADDITIVES AND CONTAMINANTS PART A-CHEMISTRY ANALYSIS CONTROL EXPOSURE & RISK ASSESSMENT (2018)
Organocatalysed depolymerisation of PET in a fully sustainable cycle using thermally stable protic ionic salt
Coralie Jehanno et al.
GREEN CHEMISTRY (2018)
Analysis of the influence of using recycled polystyrene as a substitute for bitumen in the behaviour of asphalt concrete mixtures
Marta Vila-Cortavitarte et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Green production of PVC from laboratory to industrialization: State-of-the-art review of heterogeneous non-mercury catalysts for acetylene hydrochlorination
Hao Xu et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)
Role of Crystallization on Polyolefin Interfaces: An Improved Outlook for Polyolefin Blends
Alex M. Jordan et al.
MACROMOLECULES (2018)
Mechanical recycling: Compatibilization of mixed thermoplastic wastes
Joachim Maris et al.
POLYMER DEGRADATION AND STABILITY (2018)
Plastic flexible films waste management - A state of art review
O. Horodytska et al.
WASTE MANAGEMENT (2018)
A Strategy for Nonmigrating Plasticized PVC Modified with Mannich base of Waste Cooking Oil Methyl Ester
Puyou Jia et al.
SCIENTIFIC REPORTS (2018)
An Investigation and Comparison of the Blending of LDPE and PP with Different Intrinsic Viscosities of PET
Shi-Chang Chen et al.
POLYMERS (2018)
Improving the Rheological and Mechanical Properties of Recycled PET Modified by Macromolecular Chain Extenders Synthesized by Controlled Radical Polymerization
Juan Jose Benvenuta Tapia et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
Rheological and thermorheological assessment of polyethylene in multiple extrusion process
A. K. Dordinejad et al.
THERMOCHIMICA ACTA (2018)
Compatibilization of Isotactic Polypropylene (iPP) and High-Density Polyethylene (HDPE) with iPP-PE Multiblock Copolymers
Jun Xu et al.
MACROMOLECULES (2018)
On the role of flame retardants in mechanical recycling of solid plastic waste
Laurens Delva et al.
WASTE MANAGEMENT (2018)
The effects of two-step reactive processing on the properties of recycled poly(ethylene terephthalate)
Kai Wang et al.
POLYMER BULLETIN (2017)
Biodegradability of Plastics: Challenges and Misconceptions
Stephan Kubowicz et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)
Melt extrusion of polystyrene reinforced with cellulose nanocrystals modified using poly[(styrene)-co-(2-ethylhexyl acrylate)] latex particles
Malladi Nagalakshmaiah et al.
EUROPEAN POLYMER JOURNAL (2017)
Phosphorus containing castor oil based derivatives: Potential non-migratory flame retardant plasticizer
Puyou Jia et al.
EUROPEAN POLYMER JOURNAL (2017)
Chemically recyclable polymers: a circular economy approach to sustainability
Miao Hong et al.
GREEN CHEMISTRY (2017)
Investigations on the distribution of polymer additives in polypropylene using confocal fluorescence microscopy
Leila Maringer et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2017)
An investigation on the role of GMA grafting degree on the efficiency of PET/PP-g-GMA reactive blending: morphology and mechanical properties
Omid Moini Jazani et al.
POLYMER BULLETIN (2017)
The effect of thermal and thermo-oxidative degradation conditions on rheological, chemical and thermal properties of HDPE
A. A. Cuadri et al.
POLYMER DEGRADATION AND STABILITY (2017)
Properties of native and oxidized corn starch/polystyrene blends under conditions of reactive extrusion using zinc octanoate as a catalyst
Tomy J. Gutierrez et al.
REACTIVE & FUNCTIONAL POLYMERS (2017)
Conceptualizing the circular economy: An analysis of 114 definitions
Julian Kirchherr et al.
RESOURCES CONSERVATION AND RECYCLING (2017)
POLYMERS Molecular stitches for enhanced recycling of packaging An additive creates tough blends from waste polyethylene and polypropylene
Costantino Creton
SCIENCE (2017)
Combining polyethylene and polypropylene: Enhanced performance with PE/iPP multiblock polymers
James M. Eagan et al.
SCIENCE (2017)
Mechanical and chemical recycling of solid plastic waste
Kim Ragaert et al.
WASTE MANAGEMENT (2017)
Internally plasticized PVC materials via covalent attachment of aminated tung oil methyl ester
Puyou Jia et al.
RSC ADVANCES (2017)
Cardanol Groups Grafted on Poly(vinyl chloride)Synthesis, Performance and Plasticization Mechanism
Puyou Jia et al.
POLYMERS (2017)
Self-Plasticization of PVC Materials via Chemical Modification of Mannich Base of Cardanol Butyl Ether
Puyou Jia et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
A simplified moment model for prediction of long-chain branching during peroxide modification of HDPE
Hossein Abedini et al.
MATERIALS & DESIGN (2017)
Modeling Devolatilization in Single- and Multi-Screw Extruders
Christian Marschik et al.
PROCEEDINGS OF PPS-32: THE 32ND INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (2017)
Modeling and Optimization of Melt Filtration Systems in Polymer Recycling
Sophie Pachner et al.
PROCEEDINGS OF PPS-32: THE 32ND INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (2017)
Methods of Recycling, Properties and Applications of Recycled Thermoplastic Polymers
Madalina Elena Grigore
RECYCLING (2017)
Environmental performance of bio-based and biodegradable plastics: the road ahead
Scott Lambert et al.
CHEMICAL SOCIETY REVIEWS (2017)
Recycling of plastic solid waste: A state of art review and future applications
Narinder Singh et al.
COMPOSITES PART B-ENGINEERING (2017)
Direct Use of Natural Antioxidant-rich Agro-wastes as Thermal Stabilizer for Polymer: Processing and Recycling
Krishnan A. Iyer et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Enhancement of mechanical properties of waste-sourced biocomposites through peroxide induced crosslinking
C. Gonzalez-Sanchez et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Accelerated weathering of fire-retarded wood-polypropylene composites
Irina Turku et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A review on pyrolysis of plastic wastes
Shafferina Dayana Anuar Sharuddin et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Performance evaluation for composites based on recycled polypropylene using principal component analysis and cluster analysis
Fu Gu et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Reprocessability of high impact polystyrene/clay nanocomposites in extrusion
Mario A. B. S. Nunes et al.
POLYMER DEGRADATION AND STABILITY (2016)
Chain extension of virgin and recycled poly(ethylene terephthalate): Effect of processing conditions and reprocessing
Izarelle S. Duarte et al.
POLYMER DEGRADATION AND STABILITY (2016)
Chain extension of virgin and recycled polyethylene terephthalate
Albaniza A. Tavares et al.
POLYMER TESTING (2016)
Comment on A bacterium that degrades and assimilates poly(ethylene terephthalate)
Yu Yang et al.
SCIENCE (2016)
Blending of recycled mixed polyolefins with recycled polypropylene: effect on physical and mechanical properties
Sara Hubo et al.
PROCEEDINGS OF THE REGIONAL CONFERENCE GRAZ 2015 - POLYMER PROCESSING SOCIETY PPS: CONFERENCE PAPERS (2016)
Mechanical recycling and composition effects on the properties and structure of hardwood cellulose-reinforced high density polyethylene eco-composites
Carmen Fonseca-Valero et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Influence of degassing on hot-melt extrusion process
Saad M. Alshahrani et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Co-Extrusion Layer Multiplication of Rheologically Mismatched Polymers: A Novel Processing Route
R. Huang et al.
INTERNATIONAL POLYMER PROCESSING (2015)
NMR evaluation of polystyrene nanocomposites degradated by repeated extrusion processing
Jorge P. Chimanowsky et al.
POLYMER DEGRADATION AND STABILITY (2015)
Structure elucidation of photoluminescent degradation products from polyolefins and evaluation of stabilizer formulations
L. Maringer et al.
POLYMER DEGRADATION AND STABILITY (2015)
Processability and mechanical properties of extensively recycled high density polyethylene
Pavel Oblak et al.
POLYMER DEGRADATION AND STABILITY (2015)
Effect of using sonicated sulphuric acid as an electrolyte in a lead acid battery
Mithin S. Kumar et al.
RSC ADVANCES (2015)
Recent Advances in Polyolefins/Natural Polymer Blends Used for Packaging Application
S. T. Sam et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2014)
Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends
A. Taguet et al.
PROGRESS IN POLYMER SCIENCE (2014)
Poly (ethylene terephthalate) recycling for high value added textiles
Sang Ho Park et al.
FASHION AND TEXTILES (2014)
Effectiveness of Organoclays as Compatibilizers for Multiphase Polymer Blends - A Sustainable Route for the Mechanical Recycling of Co-mingled Plastics
Andrea Causa et al.
TIMES OF POLYMERS (TOP) AND COMPOSITES 2014 (2014)
Rheological and Mechanical Properties of Recycled PET Modified by Reactive Extrusion
Supawee Makkam et al.
11TH ECO-ENERGY AND MATERIALS SCIENCE AND ENGINEERING (11TH EMSES) (2014)
Simultaneous determination of phthalate plasticizers in PVC packaging materials using homogeneous-ultrasonic extraction-GC-MS assisted with continuous wavelet transform
Chun-hong Dong et al.
ANALYTICAL METHODS (2013)
Thermal optimisation of polymer extrusion using in-process monitoring techniques
Javier Vera-Sorroche et al.
APPLIED THERMAL ENGINEERING (2013)
Characterization of polypropylene-polyethylene blends made of waste materials with compatibilizer and nano-filler
Changing Fang et al.
COMPOSITES PART B-ENGINEERING (2013)
Processing stabilisation of PE with a natural antioxidant, curcumin
Dora Tatraaljai et al.
EUROPEAN POLYMER JOURNAL (2013)
Effect of MMT concentrations as reinforcement on the properties of recycled PET/HDPE nanocomposites
Rizuan Mohd Rosnan et al.
JOURNAL OF POLYMER ENGINEERING (2013)
Low combustible polypropylene/flax/magnesium hydroxide composites: mechanical, flame retardation characterization and recycling effect
Ahmed El-sabbagh et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Recycling of waste from polymer materials: An overview of the recent works
Kotiba Hamad et al.
POLYMER DEGRADATION AND STABILITY (2013)
Effect of amorphous/recycled polypropylene ratio on thermo-mechanical properties of blends for lubricant applications
J. E. Martin-Alfonso et al.
POLYMER TESTING (2013)
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
M. M. Kabir et al.
COMPOSITES PART B-ENGINEERING (2012)
Recycling of wood-plastic composites prepared from poly(vinyl chloride) and wood flour
Nawadon Petchwattana et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Polymer tracer detection systems with UV fluorescence spectrometry to improve product recyclability
E. Maris et al.
MINERALS ENGINEERING (2012)
Control of thermal degradation of polylactide/clay nanocomposites during melt processing by chain extension reaction
Qingkai Meng et al.
POLYMER DEGRADATION AND STABILITY (2012)
The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)
J. D. Badia et al.
POLYMER DEGRADATION AND STABILITY (2012)
The effect of extensive mechanical recycling on the properties of low density polyethylene
Huiying Jin et al.
POLYMER DEGRADATION AND STABILITY (2012)
Chain extension and branching of poly(ethylene terephthalate) (PET) with di- and multifunctional epoxy or isocyanate additives: An experimental and modelling study
Patrizio Raffa et al.
REACTIVE & FUNCTIONAL POLYMERS (2012)
Hyperbranched polyurethane (HBPU)-urea and HBPU-imide coatings: Effect of chain extender and NCO/OH ratio on their properties
Aswini K. Mishra et al.
PROGRESS IN ORGANIC COATINGS (2012)
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
M. Jawaid et al.
CARBOHYDRATE POLYMERS (2011)
Metal lanolin fatty acid as novel thermal stabilizers for rigid poly(vinyl chloride)
Guo Yong et al.
JOURNAL OF RARE EARTHS (2011)
Revising the mechanism of polymer autooxidation
Ganna Gryn'ova et al.
ORGANIC & BIOMOLECULAR CHEMISTRY (2011)
A review on composite materials based on recycled thermoplastics and glass fibres
L. Scelsi et al.
PLASTICS RUBBER AND COMPOSITES (2011)
The effects of reprocessing cycles on the structure and properties of polystyrene/Cloisite 15A nanocomposites
Cherifa Remili et al.
POLYMER DEGRADATION AND STABILITY (2011)
Recycling of PVC wastes
Mehdi Sadat-Shojai et al.
POLYMER DEGRADATION AND STABILITY (2011)
Polymeric Cracking of Waste Polyethylene Terephthalate to Chemicals and Energy
Anke Brems et al.
JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION (2011)
Rapid identification of stabilisers in polypropylene using time-of-flight mass spectrometry and DART as ion source
Manuela Haunschmidt et al.
ANALYST (2010)
Chemical, morphological and mechanical analysis of sisal fiber-reinforced recycled high-density polyethylene composites
S. L. Favaro et al.
EXPRESS POLYMER LETTERS (2010)
Migration of phthalates from soft PVC packaging into shower and bath gels and assessment of consumer risk
Judith P. Amberg-Mueller et al.
JOURNAL FUR VERBRAUCHERSCHUTZ UND LEBENSMITTELSICHERHEIT-JOURNAL OF CONSUMER PROTECTION AND FOOD SAFETY (2010)
Mechanism of Degradation of Starch, a Highly Branched Polymer, during Extrusion
Wei-Chen Liu et al.
MACROMOLECULES (2010)
Addition of tracers into the polypropylene in view of automatic sorting of plastic wastes using X-ray fluorescence spectrometry
F. Bezati et al.
WASTE MANAGEMENT (2010)
Rheology and Thermal Properties of Polypropylene Modified by Reactive Extrusion with Dicumyl Peroxide and Trimethylol Propane Triacrylate
Feng-Hua Su et al.
ADVANCES IN POLYMER TECHNOLOGY (2009)
Effects of Filler-Filler and Polymer-Filler Interactions on Rheological and Mechanical Properties of HDPE-Wood Composites
Han-Xiong Huang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Recycling extruded polystyrene by dissolution with suitable solvents
Maria Teresa Garcia et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2009)
Plastics recycling: challenges and opportunities
Jefferson Hopewell et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Rigidity analysis of polypropylene/vegetal fibre composites after recycling
Alain Bourmaud et al.
POLYMER DEGRADATION AND STABILITY (2009)
Influence of the repeated extrusion on the degradation of polyethylene.: Structural changes in low density polyethylene
Jiri Dostal et al.
EUROPEAN POLYMER JOURNAL (2008)
Toughening of recycled polystyrene used for TV backset
Xiaoting Fu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Antioxidant behaviour of a nanosilica-immobilized antioxidant in polypropylene
Xiaowei Gao et al.
POLYMER DEGRADATION AND STABILITY (2008)
Recycled and virgin LDPE as rheology modifiers of lithium lubricating greases: A comparative study
J. E. Martin-Alfonso et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Chain extension and degradation during reactive processing of PET in the presence of triphenyl phosphite
F. N. Cavalcanti et al.
POLYMER ENGINEERING AND SCIENCE (2007)
Analytical strategies for the quality assessment of recycled high-impact polystyrene: A combination of thermal analysis, vibrational spectroscopy, and chromatography
Francisco Vilaplana et al.
ANALYTICA CHIMICA ACTA (2007)
Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)
D. S. Achilias et al.
JOURNAL OF HAZARDOUS MATERIALS (2007)
Biodegradability and biodegradation of polyesters
Yutaka Tokiwa et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2007)
Influence of the wood fibre filler on the internal recycling of poly(vinyl chloride)-based composites
Laurent Augier et al.
POLYMER DEGRADATION AND STABILITY (2007)
Investigations on the recycling of hemp and sisal fibre reinforced polypropylene composites
A. Bourmaud et al.
POLYMER DEGRADATION AND STABILITY (2007)
Analysis of degradation mechanism of plasticized PVC under artificial aging conditions
Mikiya Ito et al.
POLYMER DEGRADATION AND STABILITY (2007)
Development of new lubricating grease formulations using recycled LDPE as rheology modifier additive
J. E. Martin-Alfonso et al.
EUROPEAN POLYMER JOURNAL (2007)
Review article: Recycling of polystyrene
T. Maharana et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2007)
Mechanical and morphological properties of recycled high-density polyethylene, filled with calcium carbonate and fly ash
U. Atikler et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Oligomeric chain extenders for economic reprocessing and recycling of condensation plastics
M. Villalobos et al.
ENERGY (2006)
Degradation of recycled high-impact polystyrene. Simulation by reprocessing and thermo-oxidation
Francisco Vilaplana et al.
POLYMER DEGRADATION AND STABILITY (2006)
Degradation of pre-aged polymers exposed to simulated recycling:: Properties and thermal stability
S Luzuriaga et al.
POLYMER DEGRADATION AND STABILITY (2006)
Thermal, mechanical and permeation properties of gamma-irradiated multilayer food packaging films containing a buried layer of recycled low-density polyethylene
S Chytiri et al.
RADIATION PHYSICS AND CHEMISTRY (2006)
The application of a novel profluorescent nitroxide to monitor thermo-oxidative degradation of polypropylene
AS Micallef et al.
POLYMER DEGRADATION AND STABILITY (2005)
Stabilization effect of lignin in polypropylene and recycled polypropylene
A Gregorová et al.
POLYMER DEGRADATION AND STABILITY (2005)
The thermal degradation of polystyrene nanocomposite
BN Jang et al.
POLYMER (2005)
Mechanochemical degradation kinetics of high-density polyethylene melt and its mechanism in the presence of ultrasonic irradiation
YT Li et al.
ULTRASONICS SONOCHEMISTRY (2005)
Rheological properties of polypropylene during multiple extrusion
HM da Costa et al.
POLYMER TESTING (2005)
An efficient method of material recycling of municipal plastic waste
I Fortelny et al.
POLYMER DEGRADATION AND STABILITY (2004)
The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation
LA Pinheiro et al.
POLYMER DEGRADATION AND STABILITY (2004)
The three-phase structure and mechanical properties of poly(ethylene terephthalate)
R Rastogi et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2004)
Mechanical properties of continuous natural fibre-reinforced polymer composites
PJ Herrera-Franco et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Recycling of high density polyethylene/poly(vinyl chloride)/polystyrene ternary mixture with the aid of high energy radiation and compatibilizers
F Elmaghor et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
PVC floorings as post-consumer products for mechanical recycling and energy recovery
N Yarahmadi et al.
POLYMER DEGRADATION AND STABILITY (2003)
Antioxidant action mechanisms of hindered amine stabilisers
K Schwetlick et al.
POLYMER DEGRADATION AND STABILITY (2002)
European current standardization for plastic packaging recoverable through composting and biodegradation
M Avella et al.
POLYMER TESTING (2001)
Studies of synergism between carbon black and stabilisers in LDPE photodegradation
JM Pena et al.
POLYMER DEGRADATION AND STABILITY (2001)
Effects of recycling on the microstructure and the mechanical properties of isotactic polypropylene
J Aurrekoetxea et al.
JOURNAL OF MATERIALS SCIENCE (2001)
Structure and rheology of recycled PET modified by reactive extrusion
L Incarnato et al.
POLYMER (2000)
Recycling of post-used PE packaging film using the restabilization technique
CN Kartalis et al.
POLYMER DEGRADATION AND STABILITY (2000)
Simulated recycling of post-consumer high density polyethylene material
A Boldizar et al.
POLYMER DEGRADATION AND STABILITY (2000)
分享论文
