相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Cooling Effects of Cold Mist Jet with Transient Heat Transfer on High-Speed Cutting of Titanium Alloy
Qinglong An et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2020)
Experimental investigation into the effects of nozzle position, workpiece hardness, and tool type in MQL turning of AISI 1045 steel
Soroush Masoudi et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Influence of minimum quantity lubrication parameters on grind-hardening process
Xiangming Huang et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
On the benefits of sub-zero air supplemented minimum quantity lubrication systems: An experimental and mechanistic investigation on end milling of Ti-6-Al-4-V alloy
D. Mark Benjamin et al.
TRIBOLOGY INTERNATIONAL (2018)
High speed cryogenic finish machining of Ti-6Al4V with polycrystalline diamond tools
Julius Schoop et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Simplified MQL system for drilling AISI 304 SS using cryogenically treated drills
B. Naveena et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Comparison of tool life and surface roughness with MQL, flood cooling, and dry cutting conditions with P20 and D2 steel
S. W. M. A. I. Senevirathne et al.
2017 INTERNATIONAL CONFERENCE ON MATERIALS AND INTELLIGENT MANUFACTURING (ICMIM 2017) (2017)
Experimental investigation of flank wear in end milling of aluminum alloy with water-based TiO2 nanofluid lubricant in minimum quantity lubrication technique
M. S. Najiha et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Machining Parameters Optimization of Titanium Alloy using Response Surface Methodology and Particle Swarm Optimization under Minimum-Quantity Lubrication Environment
Munish Kumar Gupta et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Thermal Aspects of Environmentally Friendly-MQL grinding Process
Mohammadjafar Hadad et al.
13TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - DECOUPLING GROWTH FROM RESOURCE USE (2016)
Recent advances on the numerical modelling of turbulent flows
C. D. Argyropoulos et al.
APPLIED MATHEMATICAL MODELLING (2015)
CFD analysis of the impact of physical parameters on evaporative cooling by a mist spray system
Hamid Montazeri et al.
APPLIED THERMAL ENGINEERING (2015)
A novel numerical modeling approach to determine the temperature distribution in the cutting tool using conjugate heat transfer (CHT) analysis
Salman Pervaiz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Machining of Titanium Alloy (Ti-6Al-4V)-Theory to Application
Alokesh Pramanik et al.
MACHINING SCIENCE AND TECHNOLOGY (2015)
Experimental and numerical research on the effects of minimum quantity lubrication in thread turning of free-cutting steel AISI 1215
Qinglong An et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Enhanced Machinability of Ti-5553 Alloy from Cryogenic Machining: Comparison with MQL and Flood-cooled Machining and Modeling
Y. Sun et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
Influence of cutting speed on cutting force, flank temperature, and tool wear in end milling of Ti-6Al-4V alloy
Junzhan Hou et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Modeling the Effects of Minimum Quantity Lubrication on Machining Force, Temperature, and Residual Stress
Xia Ji et al.
MACHINING SCIENCE AND TECHNOLOGY (2014)
Computer Fluid Dynamics Analysis for Efficient Cooling and Lubrication Conditions in Micromilling of Ti6Al4V Alloy
Elisa Vazquez et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
A COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF SINGLE AND THREE NOZZLES MINIMUM QUANTITY LUBRICANT FLOW FOR MILLING
M. S. Najiha et al.
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (2014)
The effect of cutting speed and feed rate on the surface integrity in dry turning of CoCrMo alloy
A. Bordin et al.
2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) (2014)
A coupled FE and CFD approach to predict the cutting tool temperature profile in machining
Salman Pervaiz et al.
VARIETY MANAGEMENT IN MANUFACTURING: PROCEEDINGS OF THE 47TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS (2014)
Analysis of heat transfer coefficient on workpiece surface during minimum quantity lubricant grinding
Cong Mao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Evaluation of the convective heat transfer coefficient for minimum quantity lubrication (MQL)
Sheri Kurgin et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2012)
MICROMILLING IN MINIMUM QUANTITY LUBRICATION
Saurabh Kajaria et al.
MACHINING SCIENCE AND TECHNOLOGY (2012)
Application of Minimum Quantity Lubrication in Grinding
Lukasz M. Barczak et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
An experimental investigation on effects of minimum quantity lubrication oil supply rate in high-speed end milling of Ti-6Al-4V
Xiao Jiang Cai et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
CFD Analysis on the Flow Field of Minimum Quantity Lubrication during External Thread Turning
Ming Chen et al.
HIGH SPEED MACHINING V (2012)
A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys
E. A. Rahim et al.
TRIBOLOGY INTERNATIONAL (2011)
A study on droplets and their distribution for minimum quantity lubrication (MQL)
Kyung-Hee Park et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Study on orthogonal turning of titanium alloys with different coolant supply strategies
Z. G. Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication-MQL grinding
T. Tawakoli et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
An experimental investigation on contact length during minimum quantity lubrication (MQL) machining
B. Tasdelen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Effect of the minimum quantity lubrication in high-speed end-milling of AISI D2 cold-worked die steel (62 HRC) by coated carbide tools
M. C. Kang et al.
SURFACE & COATINGS TECHNOLOGY (2008)
An overview of the machinability of aeroengine alloys
EO Ezugwu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Experimental evaluation on the effect of minimal quantities of lubricant in milling
M Rahman et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning
AS Varadarajan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
A synthetic ester as an optimal cutting fluid for minimal quantity lubrication machining
S Suda et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)