相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。The Effect of Texture Floor Profile on the Lubricant Film Thickness in a Textured Hard-On-Soft Bearing With Relevance to Prosthetic Hip Implants
Quentin Allen et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2021)
Effects of surface roughness and texture on the bacterial adhesion on the bearing surface of bio-ceramic joint implants: An in vitro study
Ange Lu et al.
CERAMICS INTERNATIONAL (2020)
Maximizing the Lubricant Film Thickness Between a Rigid Microtextured and a Smooth Deformable Surface in Relative Motion, Using a Soft Elasto-Hydrodynamic Lubrication Model
Quentin Allen et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2020)
Dimple influence on load carrying capacity of parallel surfaces
M. -P. Noutary et al.
TRIBOLOGY INTERNATIONAL (2020)
Tailoring of surface topography for tribological purposes by controlled solid particle impacts
Ruslan Melentiev et al.
WEAR (2020)
Running-in friction of hip joint replacements can be significantly reduced: The effect of surface-textured acetabular cup
David Necas et al.
FRICTION (2020)
Tribological performances of symmetrically micro-textured Ti-6Al-4V alloy for hip joint
Tej Pratap et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Ring-Shaped Surface Microstructures for Improved Lubrication Performance of Joint Prostheses
Philipp Drescher et al.
LUBRICANTS (2020)
How long does a hip replacement last? A systematic review and meta-analysis of case series and national registry reports with more than 15 years of follow-up
Jonathan T. Evans et al.
LANCET (2019)
Life Expectancy and Mortality Rates in the United States, 1959-2017
Steven H. Woolf et al.
JAMA-JOURNAL OF THE AMERICAN MEDICAL ASSOCIATION (2019)
Feasibility study of micro-groove cross hatched surface texturing on Ti6Al4V for improved biotribological performance in metal-on-polymer hip implant
V Kashyap et al.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES (2019)
Bulge micro-textures influence on tribological performance of ultra-high-molecular-weight-polyethylene (UHMWPE) under phosphatidylcholine (Lipid) and bovine serum albumin (BSA) solutions
Muhammad Sufyan et al.
BIOMEDICAL PHYSICS & ENGINEERING EXPRESS (2019)
Representing a revolution: how the popular press has portrayed personalized medicine
Alessandro R. Marcon et al.
GENETICS IN MEDICINE (2018)
Total Hip Arthroplasty Bearing Surface Trends in the United States From 2007 to 2014: The Rise of Ceramic on Polyethylene
Nathanael D. Heckmann et al.
JOURNAL OF ARTHROPLASTY (2018)
Increasing Burden of Total Hip Arthroplasty Revisions in Patients Between 45 and 64 Years of Age
Sean S. Rajaee et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2018)
Enhanced lubricant film formation through micro-dimpled hard-on-hard artificial hip joint: An in-situ observation of dimple shape effects
Dipankar Choudhury et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Investigation on generation of laser assisted dimples on piston ring surface and influence of dimple parameters on friction
V. Ezhihnaran et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Enhanced performance of optimised partially textured load bearing surfaces
R. Rahmani et al.
TRIBOLOGY INTERNATIONAL (2018)
Microtextured CoCrMo alloy for use in metal-on-polyethylene prosthetic joint bearings: Multi-directional wear and corrosion measurements
J. Langhorn et al.
TRIBOLOGY INTERNATIONAL (2018)
Friction between a polyethylene pin and a microtextured CoCrMo disc, and its correlation to polyethylene wear, as a function of sliding velocity and contact pressure, in the context of metal-on-polyethylene prosthetic hip implants
A. Borjali et al.
TRIBOLOGY INTERNATIONAL (2018)
Sustained-release application of PCEC hydrogel on laser-textured surface lubrication
Junde Guo et al.
MATERIALS RESEARCH EXPRESS (2018)
Projected Volume of Primary Total Joint Arthroplasty in the US, 2014 to 2030
Matthew Sloan et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2018)
Tribological Behavior of Multi-scaled Patterned Surfaces Machined Through Inclined End Milling and Micro Shot Blasting
Jesus Resendiz et al.
TRIBOLOGY LETTERS (2018)
Friction and Wear Characteristics of Surface-Modified Titanium Alloy for Metal-on-Metal Hip Joint Bearing
Hyeon-hwa Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2018)
The impact of surface and geometry on coefficient of friction of artificial hip joints
Dipankar Choudhury et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
The load carrying capacity of textured sliding bearings with elastic deformation
Binbin Su et al.
TRIBOLOGY INTERNATIONAL (2017)
Influence of geometry and the sequence of surface texturing process on tribological properties
M. Sedlacek et al.
TRIBOLOGY INTERNATIONAL (2017)
Using a patterned microtexture to reduce polyethylene wear in metal-on-polyethylene prosthetic bearing couples
A. Borjali et al.
WEAR (2017)
3D-printed navigation template in proximal femoral osteotomy for older children with developmental dysplasia of the hip
Pengfei Zheng et al.
SCIENTIFIC REPORTS (2017)
Process parameter optimization for hot embossing uniformly textured UHMWPE surfaces for orthopedic bearings
Christina Ippolito et al.
3RD CIRP CONFERENCE ON BIOMANUFACTURING (2017)
The Wear Behavior of Textured Steel Sliding against Polymers
Meiling Wang et al.
MATERIALS (2017)
Investigation of surgically retrieved, vitamin E-stabilized, crosslinked UHMWPE implants after short-term in vivo service
Shannon L. Rowell et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2016)
Contemporary Surgical Indications and Referral Trends in Revision Total Hip Arthroplasty: A 10-Year Review
Jacob A. Haynes et al.
JOURNAL OF ARTHROPLASTY (2016)
Towards near-permanent CoCrMo prosthesis surface by combining micro-texturing and low temperature plasma carburising
Yangchun Dong et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Surface modification of Co-Cr-Mo implant alloy by laser interference lithography
Xiaofeng Wei et al.
TRIBOLOGY INTERNATIONAL (2016)
A numerical study of non-Newtonian transient elastohydrodynamic lubrication of metal-on-metal hip prostheses
Leiming Gao et al.
TRIBOLOGY INTERNATIONAL (2016)
A mixed lubrication model for studying tribological behaviors of surface texturing
Hui Zhang et al.
TRIBOLOGY INTERNATIONAL (2016)
Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings
Daniel Gropper et al.
TRIBOLOGY INTERNATIONAL (2016)
Development of low friction snake-inspired deterministic textured surfaces
P. Cuervo et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2016)
The biological response to nanometre-sized polymer particles
Aiqin Liu et al.
ACTA BIOMATERIALIA (2015)
A tribological study of the petaloid surface texturing for Co-Cr-Mo alloy artificial joints
Hui Zhang et al.
APPLIED SURFACE SCIENCE (2015)
Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplasty
Taposh Roy et al.
CERAMICS INTERNATIONAL (2015)
A novel tribological study on DLC-coated micro-dimpled orthopedics implant interface
Dipankar Choudhury et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Recent development on surface texturing in enhancing tribological performance of bearing sliders
T. Ibatan et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Numerical optimization of texture shape for parallel surfaces under unidirectional and bidirectional sliding
Cong Shen et al.
TRIBOLOGY INTERNATIONAL (2015)
Comparative Epidemiology of Revision Arthroplasty: Failed THA Poses Greater Clinical and Economic Burdens Than Failed TKA
Kevin J. Bozic et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2015)
Fabrication and characterization of DLC coated microdimples on hip prosthesis heads
Dipankar Choudhury et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2015)
The load-carrying capacity and friction coefficient of incompressible textured parallel slider bearings with surface roughness inside the texture features
Mingfeng Qiu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2015)
Tribological investigation of ultra-high molecular weight polyethylene against advanced ceramic surfaces in total hip joint replacement
Dipankar Choudhury et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2015)
Design principles for the area density of dimple patterns
Xiaolei Wang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2015)
Lubrication Enhancement for UHMWPE Sliding Contacts through Surface Texturing
Patrick S. M. Dougherty et al.
TRIBOLOGY TRANSACTIONS (2015)
Surface Texturing of Vitamin E Blended UHMWPE for Reduction of Wear
B. Sagbas et al.
ACTA PHYSICA POLONICA A (2014)
Fabrication and characterization of micro-dimple array on Al2O3 surfaces by using a micro-tooling
Taposh Roy et al.
CERAMICS INTERNATIONAL (2014)
No Differences Found in Bearing Related Hip Survivorship at 10-12 Years Follow-Up Between Patients With Ceramic on Highly Cross-Linked Polyethylene Bearings Compared to Patients With Ceramic on Ceramic Bearings
Jean-Alain Epinette et al.
JOURNAL OF ARTHROPLASTY (2014)
Response of MC3T3-E1 osteoblast cells to the microenvironment produced on Co-Cr-Mo alloy using laser surface texturing
Liguo Qin et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Effects of surface coating on reducing friction and wear of orthopaedic implants
Hee Ay Ching et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2014)
The accuracy of the compressible Reynolds equation for predicting the local pressure in gas-lubricated textured parallel slider bearings
Mingfeng Qiu et al.
TRIBOLOGY INTERNATIONAL (2014)
Designing prosthetic knee joints with bio-inspired bearing surfaces
Mingfeng Qiu et al.
TRIBOLOGY INTERNATIONAL (2014)
Optimization of Surface Texturing for Contact Between Steel and Ultrahigh Molecular Weight Polyethylene Under Boundary Lubrication
Minhaeng Cho et al.
TRIBOLOGY LETTERS (2014)
A patterned microtexture to reduce friction and increase longevity of prosthetic hip joints
Anthony Chyr et al.
WEAR (2014)
Patterned CoCrMo and Al2O3 surfaces for reduced free wear debris in artificial joint arthroplasty
Mohamad Tarabolsi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Effects of surface texturing on the performance of biocompatible UHMWPE as a bearing material during in vitro lubricated sliding/rolling motion
Adrian Lopez-Cervantes et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
CoCrMo metal-on-metal hip replacements
Yifeng Liao et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Comparison of the effects of surface texture on the surfaces of steel and UHMWPE
Bo Zhang et al.
TRIBOLOGY INTERNATIONAL (2013)
Effect of surface patterning on frictional heating of vitamin E blended UHMWPE
B. Sagbas et al.
WEAR (2013)
Modeling of surface texturing in hydrodynamic lubrication
Izhak Etsion
FRICTION (2013)
The changing demographics of total joint arthroplasty recipients in the United States and Ontario from 2001 to 2007
Bheeshma Ravi et al.
BEST PRACTICE & RESEARCH IN CLINICAL RHEUMATOLOGY (2012)
Does Vitamin E-Stabilized Ultrahigh-Molecular-Weight Polyethylene Address Concerns of Cross-Linked Polyethylene in Total Knee Arthroplasty?
Hani Haider et al.
JOURNAL OF ARTHROPLASTY (2012)
Comparison of Ten-Year Survivorship of Hip Prostheses with Use of Conventional Polyethylene, Metal-on-Metal, or Ceramic-on-Ceramic Bearings
Ingrid Milosev et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2012)
High incidence of pseudotumour formation after large-diameter metal-on-metal total hip replacement A PROSPECTIVE COHORT STUDY
B. H. Bosker et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2012)
Lubrication of metal-on-metal hip joints: The effect of protein content and load on film formation and wear
C. Myant et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
Tantalum-based multilayer coating on cobalt alloys in total hip and knee replacement
C. Balagna et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)
The influence of concave dimples on the metallic counterface on the wear of ultra-high molecular weight polyethylene
Xincong Zhou et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2012)
Biomimetic surface design for ultrahigh molecular weight polyethylene to improve the tribological properties
Bo Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2012)
Use of vitamin E to protect cross-linked UHMWPE from oxidation
Reto Lerf et al.
BIOMATERIALS (2010)
Incidence and Factors Associated with Squeaking in Alumina-on-Alumina THA
Il-Yong Choi et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2010)
Texturing of UHMWPE surface via NIL for low friction and wear properties
Tanu Suryadi Kustandi et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)
The effect of aspherical geometry and surface texturing on the elastohydrodynamic lubrication of metal-on-metal hip prostheses under physiological loading and motions
L. M. Gao et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2010)
Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach
M. B. Dobrica et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2010)
Effect of surface texturing on the elastohydrodynamic lubrication analysis of metal-on-metal hip implants
Leiming Gao et al.
TRIBOLOGY INTERNATIONAL (2010)
Hydrodynamic Lubrication of Microdimple Textured Surface Using Three-Dimensional CFD
Jing Han et al.
TRIBOLOGY TRANSACTIONS (2010)
Surface modification by electrical discharge machining: A review
Sanjeev Kumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Study on long life of artificial joints by investigating optimal sliding surface geometry for improvement in wear resistance
Hiroshi Sawano et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2009)
Surface texturing by pulsed Nd:YAG laser
L. M. Vilhena et al.
TRIBOLOGY INTERNATIONAL (2009)
Characterization of a highly cross-linked ultrahigh molecular-weight polyethylene in clinical use in total hip arthroplasty
Michel P. Laurent et al.
JOURNAL OF ARTHROPLASTY (2008)
Ceramics for prosthetic hip and knee joint replacement
Mohamed N. Rahaman et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
The effect of surface texturing on thin EHD lubrication films
I. Krupka et al.
TRIBOLOGY INTERNATIONAL (2007)
Temperature field and wear prediction for UHMWPE acetabular cup with assumed rectangular surface texture
Guang-Neng Dong et al.
MATERIALS & DESIGN (2007)
Two-dimensional CFD-analysis of micro-patterned surfaces in hydrodynamic lubrication
F Sahlin et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2005)
State of the art in laser surface texturing
I Etsion
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2005)
A laser surface textured parallel thrust bearing
V Brizmer et al.
TRIBOLOGY TRANSACTIONS (2003)
Tribological study of lubricious DLC biocompatible coatings
M Brizuela et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2002)
Experimental investigation of laser surface texturing for reciprocating automotive components
G Ryk et al.
TRIBOLOGY TRANSACTIONS (2002)
Different aspects of the role of wear debris in fretting wear
M Varenberg et al.
WEAR (2002)
In vitro comparison of the two hard-hard articulations for total hip replacements
C Rieker et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2001)
Reduction of polyethylene wear by concave dimples on the frictional surface in artificial hip joints
H Ito et al.
JOURNAL OF ARTHROPLASTY (2000)
分享论文
