相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior
R. Sokkalingam et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Manufacturing Methods, Microstructural and Mechanical Properties Evolutions of High-Entropy Alloys: A Review
Yaser A. Alshataif et al.
METALS AND MATERIALS INTERNATIONAL (2020)
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
E. P. George et al.
ACTA MATERIALIA (2020)
Synthesis, structure, and mechanical response of Cr0.26Fe0.24Al0.5 and Cr0.15Fe0.14Al 0.30Cu0.13Si0.28 nanocrystallite entropy alloys
Yaser A. Alshataif et al.
ADVANCED POWDER TECHNOLOGY (2020)
A review of multi-physical fields induced phenomena and effects in spark plasma sintering: Fundamentals and applications
Zheng-Yang Hu et al.
MATERIALS & DESIGN (2020)
Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties
R. Sokkalingam et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Linear patterning of high entropy alloy by additive manufacturing
J. Karimi et al.
MANUFACTURING LETTERS (2020)
High-entropy alloys by mechanical alloying: A review
Mayur Vaidya et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Crystal phase and surface defect driven synthesis of Pb1-xSnxF2 solid solution electrolyte for fluoride ion batteries
Palanivel Molaiyan et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)
Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
Tapabrata Malty et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Dissimilar welding of Al0.1CoCrFeNi high-entropy alloy and AISI304 stainless steel
Rathinavelu Sokkalingam et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Mechanochemical synthesis of solid-state electrolyte Sm1-xCaxF3-x for batteries and other electrochemical devices
Palanivel Molaiyan et al.
MATERIALS LETTERS (2019)
The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures
Jithin Joseph et al.
WEAR (2019)
High-entropy alloys
Easo P. George et al.
NATURE REVIEWS MATERIALS (2019)
Selective Laser Melting of Al0.3CoCrFeNi High-Entropy Alloy: Printability, Microstructure, and Mechanical Properties
Florian Peyrouzet et al.
JOM (2019)
Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties
P. V. Satyanarayana et al.
METALS (2019)
Contrasting mechanical behavior in precipitation hardenable AlxCoCrFeNi high entropy alloy microstructures: Single phase FCC vs. dual phase FCC-BCC
Sindhura Gangireddy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure and Mechanical Properties of Al-Co-Cr-Fe-Ni Base High Entropy Alloys Obtained Using Powder Metallurgy
Lukasz Rogal et al.
METALS AND MATERIALS INTERNATIONAL (2019)
Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume
T. Maity et al.
COMPOSITES PART B-ENGINEERING (2018)
Homogenization of AlxCoCrFeNi high-entropy alloys with improved corrosion resistance
Yunzhu Shi et al.
CORROSION SCIENCE (2018)
Effects of N addition on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy produced by mechanical alloying and vacuum hot pressing sintering
Yanchong Xie et al.
INTERMETALLICS (2018)
Local mechanical properties of AlxCoCrCuFeNi high entropy alloy characterized using nanoindentation
Yanan Sun et al.
INTERMETALLICS (2018)
Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics
T. Maity et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Phase evolution and thermal stability of AlCoCrFe high entropy alloy with carbon as unsolicited addition from milling media
S. Praveen et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Tribological and corrosion behavior of (100-x)(Fe70Ni30)-(x)ZrO2 composites synthesized by powder metallurgy
Neera Singh et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0.3CoCrFeMnNi high entropy alloy
Rizaldy M. Pohan et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Effect of Ti and C additions on the microstructure and mechanical properties of the FeCoCrNiMn high-entropy alloy
Hu Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural dependence of strain rate sensitivity in thermomechanically processed Al0.1CoCrFeNi high entropy alloy
Sindhura Gangireddy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Exceptionally high cavitation erosion and corrosion resistance of a high entropy alloy
R. B. Nair et al.
ULTRASONICS SONOCHEMISTRY (2018)
Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy
Sindhura Gangireddy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
High-entropy alloy strengthened by in situ formation of entropy-stabilized nano-dispersoids
Bharat Gwalani et al.
SCIENTIFIC REPORTS (2018)
Microstructural origins for a strong and ductile Al0.1CoCrFeNi high-entropy alloy with ultrafine grains
X. D. Xu et al.
MATERIALIA (2018)
Strong grain-size effect on deformation twinning of an Al0.1CoCrFeNi high-entropy alloy
S. W. Wu et al.
MATERIALS RESEARCH LETTERS (2017)
Enhanced Relative Slip Distance in Gas-Tungsten-Arc-Welded Al0.5CoCrFeNi High-Entropy Alloy
R. Sokkalingam et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Influences of Mo/Zr minor-alloying on the phase precipitation behavior in modified 310S austenitic stainless steels at high temperatures
Donghui Wen et al.
MATERIALS & DESIGN (2017)
Cooling rate effect on microstructure and mechanical properties of AlxCoCrFeNi high entropy alloys
Yukun Lv et al.
MATERIALS & DESIGN (2017)
A critical review of high entropy alloys and related concepts
D. B. Miracle et al.
ACTA MATERIALIA (2017)
Microstructure and mechanical properties of graphene reinforced Fe50Mn30Co10Cr10 high-entropy alloy composites synthesized by MA and SPS
Xinyu Liu et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder JettingSelection Guidelines
Prashanth Konda Gokuldoss et al.
MATERIALS (2017)
Defining the tensile properties of Al-12Si parts produced by selective laser melting
K. G. Prashanth et al.
ACTA MATERIALIA (2017)
Processing of Al-12Si-TNM composites by selective laser melting and evaluation of compressive and wear properties
Konda G. Prashanth et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy
Zhiqiang Fu et al.
ACTA MATERIALIA (2016)
The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures
DongYue Li et al.
INTERMETALLICS (2016)
Effects of high pressure torsion on microstructures and properties of an Al0.1CoCrFeNi high-entropy alloy
P. F. Yu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Precipitation behavior of AlxCoCrFeNi high entropy alloys under ion irradiation
Tengfei Yang et al.
SCIENTIFIC REPORTS (2016)
Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering
Wei Ji et al.
INTERMETALLICS (2015)
Irradiation Resistance in Al x CoCrFeNi High Entropy Alloys
S. Q. Xia et al.
JOM (2015)
Friction Stir Processing of a High Entropy Alloy Al0.1CoCrFeNi
N. Kumar et al.
JOM (2015)
Microstructure and mechanical properties of Mg-Al-based alloy modified with cerium
A. K. Chaubey et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hybrid nanostructured aluminum alloy with super-high strength
Zhi Wang et al.
NPG ASIA MATERIALS (2015)
High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy
N. Kumar et al.
MATERIALS & DESIGN (2015)
Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments
Olivier Guillon et al.
ADVANCED ENGINEERING MATERIALS (2014)
Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glasses
Z. Wang et al.
ADVANCED POWDER TECHNOLOGY (2014)
Exploration and Development of High Entropy Alloys for Structural Applications
Daniel B. Miracle et al.
ENTROPY (2014)
Effect of ball milling on structure and thermal stability of Al84Gd6Ni7Co3 glassy powders
Z. Wang et al.
INTERMETALLICS (2014)
Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles
Z. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Al-based metal matrix composites reinforced with Fe49.9Co35.1Nb7.7B4.5Si2.8 glassy powder: Mechanical behavior under tensile loading
D. Marko et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
High-strength ultrafine grain Mg-7.4%Al alloy synthesized by consolidation of mechanically alloyed powders
A. K. Chaubey et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys
R. Sriharitha et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures
Woei-Ren Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment
K. G. Prashanth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
Characterization of Nanocrystalline AlCoCrCuNiFeZn High Entropy Alloy Produced by Mechanical Alloying
C. Sajith Babu et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014) (2014)
Characterization of Oxide Dispersed AlCoCrFe High Entropy Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering
S. Praveen et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2013)
Modeling the strengthening effect of Al-Cu-Fe quasicrystalline particles in Al-based metal matrix composites
F. Ali et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Effect of yttria particle size on the microstructure and compression creep properties of nanostructured oxide dispersion strengthened ferritic (Fe-12Cr-2W-0.5Y2O3) alloy
P. Susila et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Production, Kinetic Study and Properties of Fe-Based Glass and Its Composites
K. G. Prashanth et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Influence of Mechanical Activation on Decomposition of Titanium Hydride
K. G. Prashanth
MATERIALS AND MANUFACTURING PROCESSES (2010)
Competition between elements during mechanical alloying in an octonary multi-principal-element alloy system
Yu-Liang Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots
K. G. Prashanth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements
CJ Tong et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
分享论文
