4.7 Article

Hygrothermal aging effects on flexural behavior of pultruded glass fiber reinforced polymer laminates in bridge applications

期刊

CONSTRUCTION AND BUILDING MATERIALS
卷 127, 期 -, 页码 237-247

出版社

ELSEVIER SCI LTD
DOI: 10.1016/j.conbuildmat.2016.09.151

关键词

Hygrothermal aging effects; Glass fiber reinforced polymer (GFRP); Pultrusion; Long-term prediction; Highway bridges

资金

  1. science and technology project of Ministry of Transport [2013318822370]
  2. National Natural Science Foundation of People's Republic of China [51578406]
  3. China Scholarship Council (CSC) [201506260100]

向作者/读者索取更多资源

It is significant for designers to consider not only short-term characteristics but also the long-term properties of composite materials that are commonly used in highway bridge applications. In this study, flexural tests were performed on composite specimens that were exposed to both fresh water and artificial seawater environments at 40 degrees C, 60 degrees C and 80 degrees C temperatures. The purpose of conducting these tests is to (1) investigate the hygrothermal aging effects on flexural properties of pultruded fiber reinforced polymer (PFRP) composites, and (2) to establish relationship between flexural strength and flexural modulus and hygrothermal aging time. Based on the results of this study, it was found that: (i) the degradation in both average flexural strength and modulus increases at higher temperatures; (ii) the degradation in transverse flexural strength and modulus is relatively higher as compared to those observed for longitudinal flexural strength and modulus; and (iii) the reduction in average flexural strength and modulus for specimens exposed to fresh water and artificial seawater environments is relatively small. The long-term hygrothermal aging effects on flexural properties of PFRP laminates, including temperature variation during exposure, were predicted using both Phillips equation and Arrhenius relationship. The predicted flexural strength, flexural modulus and coefficient A agreed well with experimental results. The hygrothermal aging effects on flexural properties, at room temperature (23 degrees C) after 100.0 years, were predicted and compared with design values prescribed by ACI-440, TR-55 and GB50608 design guidelines provisions. Results of this study confirmed the reliability of design values recommended by ACI-440 design guidelines that were found to be similar to experimental results, while design values produced by following procedures recommended by both TR-55 and GB 50608 documents are about 1.75-2.25 times larger than the predicted values. (C) 2016 Published by Elsevier Ltd.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据