Analysis of timber log-house construction system via experimental testing and analytical modelling

The paper presents the outcome of a research on the in-plane behaviour of two different log house construction systems when subjected to lateral loading. Such systems, identified by the way the logs are joined together are: the Standard half lapped joint (ST) system and Tirolerschloss joint (TR) system. Two stages of experimental testing were carried out at the laboratory of the University of Trento. In the first stage the focus was on the corner joints and on a possible wall reinforcement system (22 monotonic and 5 cyclic tests were performed). In the second stage full-scale wall specimens were tested (5 monotonic and 5 cyclic tests). Several layouts were investigated: 4.2 m long walls with thin (TR and ST) or thick logs (ST); short walls (2.75 m long); walls with openings. The test results highlighted some critical aspects in the in-plane behaviour of the walls. The lateral load carrying capacity of the wall appeared to be influenced by two main phenomena: friction and corner-joint interlocking. Due to mounting tolerance a large displacement was required to fully engage the corner joint resistance. A large horizontal plateau characterized the post friction part of the load displacement curve (wide plateau) both for ultimate limit state (ULS) and serviceability limit state (SLS). The cyclic tests showed a high level of energy dissipation that was attributed to the inter-log friction. In order to have a better insight into such aspects, a simplified theological/analytical model was developed by using the experimental data as input parameters. A good agreement between the model output and the experimental behaviour was obtained. (C) 2015 Elsevier Ltd. All rights reserved.