相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。On secondary recycling of ZrO2-reinforced HDPE filament prepared from domestic waste for possible 3-D printing of bearings
Rupinder Singh et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)
Recycled poly(lactic acid)-based 3D printed sustainable biocomposites: a comparative study with injection molding
E. O. Cisneros-Lopez et al.
MATERIALS TODAY SUSTAINABILITY (2020)
Large-scale 3D printers for additive manufacturing: design considerations and challenges
J. Shah et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
The characteristics and formation mechanisms of emissions from thermal decomposition of 3D printer polymer filaments
Shirun Ding et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2019)
On the additive manufacturing of an energy storage device from recycled material
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2019)
A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA
Antonio Lanzotti et al.
12TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING (2019)
Recycled polypropylene blends as novel 3D printing materials
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2019)
Materials Selection of 3D Printing Filament and Utilization of Recycled Polyethylene Terephthalate (PET) in a Redesigned Breadboard
Mark Keanu James E. Exconde et al.
29TH CIRP DESIGN CONFERENCE 2019 (2019)
The Effects of Iron, Silicon, Chromium, and Aluminum Additions on the Physical and Mechanical Properties of Recycled 3D Printing Filaments
Guan-Ting Pan et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used in 3D printing
Xing Guan Zhao et al.
APPLIED SURFACE SCIENCE (2018)
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
David Stoof et al.
COMPOSITES PART B-ENGINEERING (2018)
Close-looped recycling of polylactic acid used in 3D printing: An experimental investigation and life cycle assessment
Peng Zhao et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Effect of simulated mechanical recycling processes on the structure and properties of poly(lactic acid)
F. R. Beltran et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)
Characterisation of PC/ABS blend during 20 reprocessing cycles and subsequent functionality recovery by virgin additives
Hsien-Tang Chiu et al.
JOURNAL OF POLYMER RESEARCH (2018)
Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
Shan Zhong et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Downcycling versus recycling of construction and demolition waste: Combining LCA and LCC to support sustainable policy making
Andrea Di Maria et al.
WASTE MANAGEMENT (2018)
Predictive model for the Dutch post-consumer plastic packaging recycling system and implications for the circular economy
Marieke T. Brouwer et al.
WASTE MANAGEMENT (2018)
Renewable Resources and a Recycled Polymer as Raw Materials: Mats from Electrospinning of Lignocellulosic Biomass and PET Solutions
Rachel Passos de Oliveira Santos et al.
POLYMERS (2018)
Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties
Aubrey L. Woern et al.
MATERIALS (2018)
Three-Dimensional-Printed Sustainable Biochar-Recycled PET Composites
Mohanad Idrees et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Recycling of polymer waste with SiC/Al2O3 reinforcement for rapid tooling applications
Narinder Singh et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Recent Trends in Green and Sustainable Chemistry & Waste Valorisation: Rethinking Plastics in a circular economy
Guneet Kaur et al.
CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2018)
Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing
Kevin R. Hart et al.
ADDITIVE MANUFACTURING (2018)
Recycled polyethylene terephthalate as a new FFF feedstock material
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2018)
The present and future of e-waste plastics recycling
Veena Sahajwalla et al.
CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2018)
Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material
Siewhui Chong et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Is. D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon
Szymon Wojtyla et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2017)
Mechanical and chemical recycling of solid plastic waste
Kim Ragaert et al.
WASTE MANAGEMENT (2017)
Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid
Isabelle Anderson
3D PRINTING AND ADDITIVE MANUFACTURING (2017)
Drivers to Sustainable Plastic Solid Waste Recycling: A Review
Bupe G. Mwanza et al.
14TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING, GCSM 2016 (2017)
Polymer recycling in an open-source additive manufacturing context: Mechanical issues
Fabio A. Cruz Sanchez et al.
ADDITIVE MANUFACTURING (2017)
Recycling of plastic solid waste: A state of art review and future applications
Narinder Singh et al.
COMPOSITES PART B-ENGINEERING (2017)
Production and 3D printing processing of bio-based thermoplastic filament
Eleni Gkartzou et al.
MANUFACTURING REVIEW (2017)
Thermal characterization of recycled polymer for additive manufacturing applications
K. S. Boparai et al.
COMPOSITES PART B-ENGINEERING (2016)
Investigation for dimensional accuracy of AMC prepared by FDM assisted investment casting using nylon-6 waste based reinforced filament
Rupinder Singh et al.
MEASUREMENT (2016)
Effect of different mechanical recycling processes on the hydrolytic degradation of poly(L-lactic acid)
F. R. Beltran et al.
POLYMER DEGRADATION AND STABILITY (2016)
Thermo-mechanical degradation of plasticized poly(lactide) after multiple reprocessing to simulate recycling: Multi-scale analysis and underlying mechanisms
B. Bruster et al.
POLYMER DEGRADATION AND STABILITY (2016)
Use of recycled plastics in concrete: A critical review
Lei Gu et al.
WASTE MANAGEMENT (2016)
Polymer recycling codes for distributed manufacturing with 3-D printers
Emily J. Hunt et al.
RESOURCES CONSERVATION AND RECYCLING (2015)
Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
B. M. Tymrak et al.
MATERIALS & DESIGN (2014)
Tailoring polylactide (PLA) properties for automotive applications: Effect of addition of designed additives on main mechanical properties
D. Notta-Cuvier et al.
POLYMER TESTING (2014)
Distributed recycling of waste polymer into RepRap feedstock
Christian Baechler et al.
RAPID PROTOTYPING JOURNAL (2013)
Assessment of the properties of poly(L-lactic acid) sheets produced with differing amounts of postconsumer recycled poly(L-lactic acid)
Chaiyatas Chariyachotilert et al.
JOURNAL OF PLASTIC FILM & SHEETING (2012)
Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance
J. D. Badia et al.
POLYMER DEGRADATION AND STABILITY (2012)
A review on tertiary recycling of high-density polyethylene to fuel
Sachin Kumar et al.
RESOURCES CONSERVATION AND RECYCLING (2011)
Environmental and health hazard ranking and assessment of plastic polymers based on chemical composition
Delilah Lithner et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2011)
Thermal degradation behaviors of polyethylene and polypropylene. Part I: Pyrolysis kinetics and mechanisms
A. Aboulkas et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
Plastics recycling: challenges and opportunities
Jefferson Hopewell et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Characterisation of multi-extruded poly(lactic acid)
Marian Zenkiewicz et al.
POLYMER TESTING (2009)
Recycling and recovery routes of plastic solid waste (PSW): A review
S. M. Al-Salem et al.
WASTE MANAGEMENT (2009)
Biological degradation of plastics: A comprehensive review
Aamer Ali Shah et al.
BIOTECHNOLOGY ADVANCES (2008)
Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
Isabelle Pillin et al.
POLYMER DEGRADATION AND STABILITY (2008)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Degradation of polyethylene during extrusion.: II.: Degradation of low-density polyethylene, linear low-density polyethylene, and high-density polyethylene in film extrusion
T Andersson et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Logistic approach to polymer degradation in dynamic TGA
R Cao et al.
POLYMER DEGRADATION AND STABILITY (2004)