相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Phase-field numerical strategies for deviatoric driven fractures
R. Alessi et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Effect of resin-rich zones on the failure response of carbon fiber reinforced polymers
Hossein Ahmadian et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Matrix-precipitate interface-induced martensitic transformation within nanoscale phase field approach: Effect of energy and dimensionless interface width
Anup Basak et al.
ACTA MATERIALIA (2020)
Modelling damage in fibre-reinforced thermoplastic composite laminates subjected to three-point bend loading
Haibao Liu et al.
COMPOSITE STRUCTURES (2020)
A constitutive model for elastoplastic-damage coupling effect of unidirectional fiber-reinforced polymer matrix composites
Yanfei Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
A phase-field model for fracture of unidirectional fiber-reinforced polymer matrix composites
Funda Aksu Denli et al.
COMPUTATIONAL MECHANICS (2020)
Wavelet-enriched adaptive hierarchical FE model for coupled crystal plasticity-phase field modeling of crack propagation in polycrystalline microstructures
Jiahao Cheng et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Modeling micro-cracking and failure in short fiber-reinforced composites
G. Lancioni et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Finite deformation cohesive zone phase field model for crack propagation in multi-phase microstructures
Preetam Tarafder et al.
COMPUTATIONAL MECHANICS (2020)
Determination of Mechanical Characteristics for Fiber-Reinforced Concrete with Straight and Hooked Fibers
Zuzana Marcalikova et al.
CRYSTALS (2020)
Modeling crack propagation in variable stiffness composite laminates using the phase field method
Hirshikesh et al.
COMPOSITE STRUCTURES (2019)
A phase field approach to simulate intralaminar and translaminar fracture in long fiber composite materials
A. Quintanas-Corominas et al.
COMPOSITE STRUCTURES (2019)
Mechanical comparison of new composite materials for aerospace applications
C. Barile et al.
COMPOSITES PART B-ENGINEERING (2019)
Phase field method for simulating the brittle fracture of fiber reinforced composites
B. B. Yin et al.
ENGINEERING FRACTURE MECHANICS (2019)
An improved crack-bridging model for rigid particle-polymer composites
Qinghua Meng et al.
ENGINEERING FRACTURE MECHANICS (2019)
Multiscale modeling of fiber recruitment and damage with a discrete fiber dispersion method
Kewei Li et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Crack propagation prediction in heterogeneous microstructure using an efficient phase-field algorithm
Karlo Seles et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
A multiscale framework based on phase field method and XFEM to simulate fracture in highly heterogeneous materials
R. U. Patil et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Mode I intralaminar fracture toughness of 2D woven carbon fibre reinforced composites: A comparison of stable and unstable crack propagation techniques
D. Dalli et al.
ENGINEERING FRACTURE MECHANICS (2019)
Mesoscale analysis of the transverse cracking kinetics in woven composite laminates using a phase-field fracture theory
J. J. Espadas-Escalante et al.
ENGINEERING FRACTURE MECHANICS (2019)
Role of interfacial transition zone in phase field modeling of fracture in layered heterogeneous structures
Thanh-Tung Nguyen et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2019)
Failure and complex crack patterns in hybrid laminates: A phase-field approach
R. Alessi et al.
COMPOSITES PART B-ENGINEERING (2019)
Hybrid carbon fiber-carbon nanotubes reinforced polymer composites: A review
Muhammad Razlan Zakaria et al.
COMPOSITES PART B-ENGINEERING (2019)
A phase-field model for strength and fracture analyses of fiber-reinforced composites
J. J. Espadas-Escalante et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Modelling progressive failure in multi-phase materials using a phase field method
Peng Zhang et al.
ENGINEERING FRACTURE MECHANICS (2019)
Interplay of various fracture mechanisms in bio-inspired staggered structure
Avtar Singh et al.
MECHANICS OF MATERIALS (2019)
A finite fracture model for the analysis of multi-cracking in woven ceramic matrix composites
J. Li et al.
COMPOSITES PART B-ENGINEERING (2018)
Phase-field modeling of anisotropic brittle fracture including several damage mechanisms
Jeremy Bleyer et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Thermodynamically consistent and scale-dependent phase field approach for crack propagation allowing for surface stresses
Valery I. Levitas et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Mechanics of bioinspired lamellar structured ceramic/polymer composites: Experiments and models
Sina Askarinejad et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Multiscale analysis of mixed-mode fracture and effective traction-separation relations for composite materials
Sergio Turteltaub et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Development of Biobased Epoxy Matrices for the Preparation of Green Composite Materials for Civil Engineering Applications
Amandine Viretto et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Experimental Study on Shear Behavior of Steel Fiber Reinforced Concrete Beams with High-Strength Reinforcement
Jun Zhao et al.
MATERIALS (2018)
A new multiscale phase field method to simulate failure in composites
R. U. Patil et al.
ADVANCES IN ENGINEERING SOFTWARE (2018)
Mixed-mode fracture in open-hole composite plates of finite-width: An asymptotic coupled stress and energy approach
J. Felger et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
A multiscale crack-bridging model of cellulose nanopaper
Qinghua Meng et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)
Carbon fiber reinforced metal matrix composites: Fabrication processes and properties
Kamyar Shirvanimoghaddam et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Ductility of steel fibre/epoxy composites in function of their microstructure
Michael Guy Callens et al.
COMPOSITE STRUCTURES (2017)
Carbon nanotube-grafted carbon fiber polymer composites: Damage characterization on the micro-scale
Luman Zhang et al.
COMPOSITES PART B-ENGINEERING (2017)
Multi-phase-field modeling of anisotropic crack propagation for polycrystalline materials
Thanh-Tung Nguyen et al.
COMPUTATIONAL MECHANICS (2017)
Determination of Mode-I Fracture Toughness of Epoxy-Glass Fibre Composite Laminate
D. Srikanth Rao et al.
PLASTICITY AND IMPACT MECHANICS (2017)
Translaminar fracture toughness of interply hybrid laminates under tensile and compressive loads
A. Ortega et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
A multi-scale based cohesive zone model for the analysis of thickness scaling effect in fiber bridging
Luis P. Canal et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Energetic formulation for rate-independent processes: remarks on discontinuous evolutions with a simple example
Roberto Alessi
ACTA MECHANICA (2016)
An XFEM approach for modelling delamination in composite laminates
Saleh Yazdani et al.
COMPOSITE STRUCTURES (2016)
XFEM simulation of delamination in composite laminates
Libin Zhao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A Mode I cohesive law characterization procedure for through-the-thickness crack propagation in composite laminates
Andrew Bergan et al.
COMPOSITES PART B-ENGINEERING (2016)
Carbon fiber/carbon nanotube reinforced hierarchical composites: Effect of CNT distribution on shearing strength
H. W. Zhou et al.
COMPOSITES PART B-ENGINEERING (2016)
Phase field modeling of ductile fracture at finite strains: A variational gradient-extended plasticity-damage theory
Christian Miehe et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
A structural finite element model for lamellar unit of aortic media indicates heterogeneous stress field after collagen recruitment
James R. Thunes et al.
JOURNAL OF BIOMECHANICS (2016)
XFEM analysis of fiber bridging in mixed-mode crack propagation in composites
A. Afshar et al.
COMPOSITE STRUCTURES (2015)
Tensile behaviour of stainless steel fibre/epoxy composites with modified adhesion
Michael Guy Callens et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Phase field modeling of directional fracture in anisotropic polycrystals
J. D. Clayton et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Cohesive-zone modelling of crack nucleation and propagation in particulate composites
Sathiskumar A. Ponnusami et al.
ENGINEERING FRACTURE MECHANICS (2015)
A phase field method to simulate crack nucleation and propagation in strongly heterogeneous materials from direct imaging of their microstructure
T. T. Nguyen et al.
ENGINEERING FRACTURE MECHANICS (2015)
On mechanics and material length scales of failure in heterogeneous interfaces using a finite strain high performance solver
Matthew Mosby et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2015)
A review on phase-field models of brittle fracture and a new fast hybrid formulation
Marreddy Ambati et al.
COMPUTATIONAL MECHANICS (2015)
Analysis of the effect of a stress raiser on the strength of a UD flax/epoxy composite in off-axis tension
J. Modniks et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Toughening mechanisms in bioinspired multilayered materials
Sina Askarinejad et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2015)
Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading
K. Wille et al.
CEMENT & CONCRETE COMPOSITES (2014)
Ductile steel fibre composites with brittle and ductile matrices
M. G. Callens et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Multi-scale constitutive modeling of Ceramic Matrix Composites by Continuum Damage Mechanics
Amir Shojaei et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)
Effect of aneurysm on biomechanical properties of radially-oriented collagen fibers in human ascending thoracic aortic media
Alkiviadis Tsamis et al.
JOURNAL OF BIOMECHANICS (2014)
A mechanistic model on the role of radially-running collagen fibers on dissection properties of human ascending thoracic aorta
Siladitya Pal et al.
JOURNAL OF BIOMECHANICS (2014)
Strong, tough and stiff bioinspired ceramics from brittle constituents
Florian Bouville et al.
NATURE MATERIALS (2014)
Mechanical properties of graphene platelet-reinforced alumina ceramic composites
Jian Liu et al.
CERAMICS INTERNATIONAL (2013)
Green composites: A review of adequate materials for automotive applications
Georgios Koronis et al.
COMPOSITES PART B-ENGINEERING (2013)
A phase field model of dynamic fracture: Robust field updates for the analysis of complex crack patterns
M. Hofacker et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2013)
Phase-field theory for martensitic phase transformations at large strains
Valery I. Levitas
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Effect of in-plane deformation on the cohesive failure of heterogeneous adhesives
Alejandro M. Aragon et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Identification of material parameters for modelling delamination in the presence of fibre bridging
Alessandro Airoldi et al.
COMPOSITE STRUCTURES (2012)
A phase-field description of dynamic brittle fracture
Michael J. Borden et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)
Fracture analysis of composites by time independent moving-crack orthotropic XFEM
D. Motamedi et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)
Discontinuous crack-bridging model for fracture toughness analysis of nacre
Yue Shao et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
Hierarchical structure and mechanical properties of nacre: a review
Jiyu Sun et al.
RSC ADVANCES (2012)
Multiscale modelling of two-phase Ceramic Matrix Composites
T. Sadowski et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
Delamination analysis of composites by new orthotropic bimaterial extended finite element method
S. Esna Ashari et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2011)
A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits
Christian Miehe et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)
Dynamic analysis of fixed cracks in composites by the extended finite element method
D. Motamedi et al.
ENGINEERING FRACTURE MECHANICS (2010)
A continuum phase field model for fracture
Charlotte Kuhn et al.
ENGINEERING FRACTURE MECHANICS (2010)
Coupled multi-scale cohesive modeling of failure in heterogeneous adhesives
M. G. Kulkarni et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2010)
Thermodynamically consistent phase-field models of fracture: Variational principles and multi-field FE implementations
C. Miehe et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2010)
Damage Micromechanics for Constitutive Relations and Failure of Microcracked Quasi-Brittle Materials
Xi-Qiao Feng et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2010)
Dynamic crack propagation analysis of orthotropic media by the extended finite element method
D. Motamedi et al.
INTERNATIONAL JOURNAL OF FRACTURE (2010)
Regularized variational theories of fracture: A unified approach
Francesco Freddi et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)
Experiment and modeling of mechanical properties on iron matrix composites reinforced by different types of ceramic particles
J. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Analytical and numerical modeling of R curves for cracks with bridging zones
John A. Nairn
INTERNATIONAL JOURNAL OF FRACTURE (2009)
A procedure for superposing linear cohesive laws to represent multiple damage mechanisms in the fracture of composites
Carlos G. Davila et al.
INTERNATIONAL JOURNAL OF FRACTURE (2009)
Regularized formulation of the variational brittle fracture with unilateral contact: Numerical experiments
Hanen Amor et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2009)
Multi-scale modeling of heterogeneous adhesives: Effect of particle decohesion
Mohan G. Kulkarni et al.
MECHANICS OF MATERIALS (2009)
Merger of structure and material in nacre and bone - Perspectives on de novo biomimetic materials
Horacio D. Espinosa et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Multiscale model for predicting damage evolution in composites due to impact loading
F. V. Souza et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
The variational approach to fracture
Blaise Bourdin et al.
JOURNAL OF ELASTICITY (2008)
Multiscale cohesive failure modeling of heterogeneous adhesives
Karel Matous et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2008)
A continuum damage model for composite laminates:: Part I -: Constitutive model
P. Maimi et al.
MECHANICS OF MATERIALS (2007)
Developing new enrichment functions for crack simulation in orthotropic media by the extended finite element method
A. Asadpoure et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2007)
Cohesive modeling of delamination in Z-pin reinforced composite laminates
Venkata Dantuluri et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Multiscale framework for modeling of fracture in high performance fiber reinforced cementitious composites
Petr Kabele
ENGINEERING FRACTURE MECHANICS (2007)
Multiscale modeling of fracture in fiber-reinforced composites
Carlos Gonzalez et al.
ACTA MATERIALIA (2006)
Modeling of composite fracture using cohesive zone and bridging models
CT Sun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Mechanical properties of nacre constituents and their impact on mechanical performance
Francois Barthelat et al.
JOURNAL OF MATERIALS RESEARCH (2006)
On the influence of the shape of the interface law on the application of cohesive-zone models
G Alfano
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Direct measurement of fiber bridging in notched glass-ceramic-matrix composites
KG Dassios et al.
JOURNAL OF MATERIALS RESEARCH (2006)
Synthesis and characterization of TiB2-reinforced iron-based composites
A Anal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Crack analysis in orthotropic media using the extended finite element method
Alireza Asadpoure et al.
THIN-WALLED STRUCTURES (2006)
Mixed-mode cohesive-zone models for fracture of an adhesively bonded polymer-matrix composite
S Li et al.
ENGINEERING FRACTURE MECHANICS (2006)
Metal matrix composites - From science to technological significance
DB Miracle
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite
S Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Use of mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite
S Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Advanced ceramic matrix composite materials for current and future propulsion technology applications
S Schmidt et al.
ACTA ASTRONAUTICA (2004)
Cohesive-zone models, higher-order continuum theories and reliability methods for computational failure analysis
R de Borst et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2004)
Structural and mechanical properties of the organic matrix layers of nacre
F Song et al.
BIOMATERIALS (2003)
Studies of the effect of metal particles on the fracture toughness of ceramic matrix composites
K Konopka et al.
MATERIALS CHARACTERIZATION (2003)
Analytical solutions for cohesive zone models
JG Williams et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
Bridged interface cracks in anisotropic bimaterials
LQ Ni et al.
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES (2000)
Simulation of ductile crack growth using computational cells: numerical aspects
AS Gullerud et al.
ENGINEERING FRACTURE MECHANICS (2000)
分享论文
