相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Prediction of the density and viscosity of biodiesel and the influence of biodiesel properties on a diesel engine fuel supply system
Anh Tuan Hoang
JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY (2021)
Effect of renewable fuel and injection strategies on combustion characteristics and gaseous emissions in diesel engines
Mohammed A. Fayad
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Effects of injection pressure on the NOx and PM emission control of diesel engine: A review under the aspect of PCCI combustion condition
Dao Nam Cao et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Effect of nozzle opening pressure on combustion, performance, and emission analyses of a dual fuel diesel engine
Naseem Khayum et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Applicability of Fuel Injection Techniques for Modern Diesel Engines
Anh Tuan Hoang
PROCEEDINGS OF THE 2019 1ST INTERNATIONAL CONFERENCE ON SUSTAINABLE MANUFACTURING, MATERIALS AND TECHNOLOGIES (2020)
A Study on a Solution to Reduce Emissions by using Hydrogen as an Alternative Fuel for a Diesel Engine Integrated Exhaust Gas Recirculation
Anh Tuan Hoang et al.
INTERNATIONAL CONFERENCE ON EMERGING APPLICATIONS IN MATERIAL SCIENCE AND TECHNOLOGY (ICEAMST 2020) (2020)
A core correlation of spray characteristics, deposit formation, and combustion of a high-speed diesel engine fueled with Jatropha oil and diesel fuel
Anh Tuan Hoang et al.
FUEL (2019)
A Review of Early Injection Strategy in Premixed Combustion Engines
Xingyu Liang et al.
APPLIED SCIENCES-BASEL (2019)
Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel
Anh Tuan Hoang
ENERGY (2019)
Trilateral correlation of spray characteristics, combustion parameters, and deposit formation in the injector hole of a diesel engine running on preheated Jatropha oil and fossil diesel fuel
Anh Tuan Hoang et al.
BIOFUEL RESEARCH JOURNAL-BRJ (2019)
Study on optimal combustion strategy to improve combustion performance in a single-cylinder PCCI diesel engine with different combustion chamber geometry
Seung Hyun Yoon et al.
APPLIED THERMAL ENGINEERING (2018)
Influence of narrow fuel spray angle and split injection strategies on combustion efficiency and engine performance in a common rail direct injection diesel engine
Raouf Mobasheri
INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS (2017)
Effect of split fuel injection and EGR on NOx and PM emission reduction in a low temperature combustion (LTC) mode diesel engine
Ayush Jain et al.
ENERGY (2017)
Evolution, challenges and path forward for low temperature combustion engines
Avinash Kumar Agarwal et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)
Performance and emission characteristics of biodiesel blends in a premixed compression ignition engine with exhaust gas recirculation
Bhaskar Kathirvelu et al.
ENVIRONMENTAL ENGINEERING RESEARCH (2017)
Effects of center of heat release on combustion and emissions in a PCCI diesel engine fuelled by DMC-diesel blend
Deqing Mei et al.
APPLIED THERMAL ENGINEERING (2017)
An experimental study on the combustion and emission characteristics of a diesel engine under low temperature combustion of diesel/gasoline/n-butanol blends
Haozhong Huang et al.
APPLIED ENERGY (2016)
Impact of fuel spray angles and injection timing on the combustion and emission characteristics of a high-speed diesel engine
Hyung Jun Kim et al.
ENERGY (2016)
On the role of droplet bouncing in modeling impinging sprays under elevated pressures
Zhenyu Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Numerical Study on the Fuel Spray Targeting for the Improvement of HSDI Engine Performance
Se Hun Min et al.
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B (2016)
Investigation of butanol-fuelled HCCI combustion on a high efficiency diesel engine
Ming Zheng et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Effects of exhaust gas recirculation in diesel engines featuring late PCCI type combustion strategies
S. d'Ambrosio et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Morphology, composition, and structure of carbon deposits from diesel and biomass oil/diesel blends on a pintle-type fuel injector nozzle
Hengzhou Wo et al.
TRIBOLOGY INTERNATIONAL (2015)
A piston geometry and nozzle spray angle investigation in a DI diesel engine by quantifying the air-fuel mixture
Pavlos Dimitriou et al.
INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS (2015)
Modeling of Aqueous Urea Solution injection with characterization of spray-wall cooling effect and risk of onset of wall wetting
Lorenzo Nocivelli et al.
70TH CONFERENCE OF THE ITALIAN THERMAL MACHINES ENGINEERING ASSOCIATION, ATI2015 (2015)
DEVELOPMENT OF A NEW SPRAY/WALL INTERACTION MODEL FOR DIESEL SPRAY UNDER PCCI-ENGINE RELEVANT CONDITIONS
Yanzhi Zhang et al.
ATOMIZATION AND SPRAYS (2014)
Investigation of the combustion and emission characteristics of partially premixed compression ignition in a heavy-duty diesel engine
Xiao-Bei Cheng et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2014)
HC and CO emissions reduction by early injection strategy in a bioethanol blended diesel-fueled engine with a narrow angle injection system
Su Han Park et al.
APPLIED ENERGY (2013)
Effects of ethanol-diesel-biodiesel blends on combustion and emissions in premixed low temperature combustion
Qiang Fang et al.
APPLIED THERMAL ENGINEERING (2013)
Investigation of two-stage split-injection strategies for a Dieseline fuelled PPCI engine
Soheil Zeraati Rezaei et al.
FUEL (2013)
Conceptual models for partially premixed low-temperature diesel combustion
Mark P. B. Musculus et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2013)
HC and CO emissions of premixed low-temperature combustion fueled by blends of diesel and gasoline
Dong Han et al.
FUEL (2012)
Combustion and emission characteristics of converging group-hole nozzle under lean engine operating conditions
Sungwook Park et al.
FUEL (2011)
Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fueled multi-cylinder diesel engine with common-rail injection system
In Mo Youn et al.
FUEL PROCESSING TECHNOLOGY (2011)
Development and evaporation of group-hole nozzle sprays under various surrounding and impinging conditions of direct-injection diesel engines
S. Moon et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2011)
Optimization of fuel/air mixture formation for stoichiometric diesel combustion using a 2-spray-angle group-hole nozzle
Sung Wook Park et al.
FUEL (2009)
A study of the characteristics of mixture formation and combustion in a PCCI engine using an early multiple injection strategy
Hyung-min Kim et al.
ENERGY & FUELS (2008)
Influence of early fuel injection timings on premixing and combustion in a diesel engine
Sanghoon Kook et al.
ENERGY & FUELS (2008)
Effects of injection angles on combustion processes using multiple injection strategies in an HSDI diesel engine
Tiegang Fang et al.
FUEL (2008)
New developments of the NADI (TM) concept to improve operating range, exhaust emissions and noise
B Gatellier et al.
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2006)