期刊
CHEMICAL ENGINEERING JOURNAL
卷 413, 期 -, 页码 -出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.cej.2020.127405
关键词
Field tests; Membrane; Facilitated transport; CO2 capture; Flue gas; Hollow fibers
资金
- European Union [727734]
- Research Council of Norway [294533, 245963/F50]
This study presents testing of pre-pilot scale membrane modules for CO2 capture in a cement plant in Italy, showing high CO2 flux and purity, good resistance, and high potential for efficient separation unit, as demonstrated through operating parameters and simulation studies.
Alarming increase in global CO2 emissions warrants acceleration of CO2 capture technologies. In this work, testing of pre-pilot scale membrane modules containing hybrid facilitated transport membranes in hollow fiber configuration is reported. The tests were carried out using real flue gas from a slipstream in the Colacem cement plant located in Gubbio, Italy. With the fabricated modules, CO2 flux of up to 750 NL m(-2)h(-1) with a CO2 permeate purity ranging from 50 to 55 vol% was recorded. All pre-pilot membrane modules showed increased CO2 permeance in industrial testing (1.5 to 1.9x higher) compared to laboratory evaluation owing to the reliable water profile and high temperature of the flue gas from the chimney. Influence of operating parameters (e.g., pressures in the feed and permeate) were studied. Long-term testing showed no obvious reduction in permeation performance. Furthermore, the membranes with mobile carriers when exposed to the feed gas containing SOx and NOx exhibited good resistance to performance deterioration despite high concentrations of acidic impurities. Simulation studies based on validated experimental performance under industrial conditions reveal the high potential of the fabricated membranes as an efficient separation unit capable of achieving industrial capture rate and CO2 purity requirements using a relatively low membrane area.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据