相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Additive Manufacturing of Precision Biomaterials
Elia A. Guzzi et al.
ADVANCED MATERIALS (2020)
A comparative study of three biomaterials in an ovine bone defect model
Boyle C. Cheng et al.
SPINE JOURNAL (2020)
Workflow for highly porous resorbable custom 3D printed scaffolds using medical grade polymer for large volume alveolar bone regeneration
Michal Bartnikowski et al.
CLINICAL ORAL IMPLANTS RESEARCH (2020)
Development of biodegradable bioactive glass ceramics by DLP printed containing EPCs/BMSCs for bone tissue engineering of rabbit mandible defects
Fangfang Xu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Evaluation of the Dimensional Accuracy of 3D-Printed Anatomical Mandibular Models Using FFF, SLA, SLS, MJ, and BJ Printing Technology
Bilal Msallem et al.
JOURNAL OF CLINICAL MEDICINE (2020)
Bone Regeneration Capability of 3D Printed Ceramic Scaffolds
Ju-Won Kim et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)
3D Printing of Cell Culture Devices: Assessment and Prevention of the Cytotoxicity of Photopolymers for Stereolithography
Sebastian Kress et al.
MATERIALS (2020)
Sustainable release of vancomycin from micro-arc oxidised 3D-printed porous Ti6Al4V for treating methicillin-resistant Staphylococcus aureus bone infection and enhancing osteogenesis in a rabbit tibia osteomyelitis model
Teng Zhang et al.
BIOMATERIALS SCIENCE (2020)
Highly porous titanium cup in cementless total hip arthroplasty: registry results at eight years
Francesco Castagnini et al.
INTERNATIONAL ORTHOPAEDICS (2019)
A novel 3D printed cage with microporous structure and in vivo fusion function
Peng Li et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2019)
3D printed polymer-mineral composite biomaterials for bone tissue engineering: Fabrication and characterization
Joanna Babilotte et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
Comparative analysis of structure and mechanical properties of porous PEEK and UHMWPE biomimetic scaffolds
F. S. Senatov et al.
MATERIALS LETTERS (2019)
Structural mechanics of 3D-printed poly(lactic acid) scaffolds with tetragonal, hexagonal and wheel-like designs
Xiangyu Liang et al.
BIOFABRICATION (2019)
Evaluation of sterilisation methods for bio-ink components: gelatin, gelatin methacryloyl, hyaluronic acid and hyaluronic acid methacryloyl
Cathal D. O'Connell et al.
BIOFABRICATION (2019)
Adsorption and release kinetics of growth factors on barrier membranes for guided tissue/bone regeneration: A systematic review
Jordi Caballe-Serrano et al.
ARCHIVES OF ORAL BIOLOGY (2019)
Early osteointegration evaluation of porous Ti6Al4V scaffolds designed based on triply periodic minimal surface models
Lan Li et al.
JOURNAL OF ORTHOPAEDIC TRANSLATION (2019)
Polymer Fiber Scaffolds for Bone and Cartilage Tissue Engineering
Yanbo Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Advances in additive manufacturing for bone tissue engineering scaffolds
Ana Paula Moreno Madrid et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Enhanced bioactivity of titanium-coated polyetheretherketone implants created by a high-temperature 3D printing process
Hyun-Do Jung et al.
BIOFABRICATION (2019)
Applications of 3D printing on craniofacial bone repair: A systematic review
Michael Maroulakos et al.
JOURNAL OF DENTISTRY (2019)
Silk fibroin/gelatin microcarriers as scaffolds for bone tissue engineering
Kim A. Luetchford et al.
Materials Science & Engineering C-Materials for Biological Applications (2019)
Effect of different sterilization methods on the properties of commercial biodegradable polyesters for single-use, disposable medical devices
Yuping Zhao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone
Ali Entezari et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Alveolar bone repair of rhesus monkeys by using BMP-2 gene and mesenchymal stem cells loaded three-dimensional printed bioglass scaffold
Liyan Wang et al.
SCIENTIFIC REPORTS (2019)
3D printed porous PLA/nHA composite scaffolds with enhanced osteogenesis and osteoconductivity in vivo for bone regeneration
Xibao Chen et al.
BIOMEDICAL MATERIALS (2019)
Additive manufacturing of bone scaffolds
Youwen Yang et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2019)
Physicochemical Properties and Structure of the Bone Matrix in Simulated Tuberculous Osteitis
V. K. Krut'ko et al.
TECHNICAL PHYSICS (2019)
Custom Repair of Mandibular Bone Defects with 3D Printed Bioceramic Scaffolds
H. Shao et al.
JOURNAL OF DENTAL RESEARCH (2018)
Additive manufacturing of titanium alloys in the biomedical field: processes, properties and applications
Francesco Trevisan et al.
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2018)
Bone regeneration strategies: Engineered scaffolds, bioactive molecules and stem cells current stage and future perspectives
Antalya Ho-Shui-Ling et al.
BIOMATERIALS (2018)
Custom design and biomechanical analysis of 3D-printed PEEK rib prostheses
Jianfeng Kang et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2018)
Sterilization of implantable polymer-based medical devices: A review
Namita P. Tipnis et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Biomechanical, histological, and computed X-ray tomographic analyses of hydroxyapatite coated PEEK implants in an extended healing model in rabbit
Par Johansson et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Orbital Reconstruction by Patient-Specific Implant Printed in Porous Titanium: A Retrospective Case Series of 12 Patients
Jean-Thomas Bachelet et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2018)
Three dimensionally printed bioactive ceramic scaffold osseoconduction across critical-sized mandibular defects
Christopher D. Lopez et al.
JOURNAL OF SURGICAL RESEARCH (2018)
CT image segmentation methods for bone used in medical additive manufacturing
Maureen van Eijnatten et al.
MEDICAL ENGINEERING & PHYSICS (2018)
Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review
Chen Liu et al.
SCANNING (2018)
Vertebral body replacement using patient-specific three-dimensional-printed polymer implants in cervical spondylotic myelopathy: an encouraging preliminary report
Aymeric Amelot et al.
SPINE JOURNAL (2018)
Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model
Kirk C. McGilvray et al.
SPINE JOURNAL (2018)
Advanced Therapy Medicinal Products: A Guide for Bone Marrow-derived MSC Application in Bone and Cartilage Tissue Engineering
Davide Confalonieri et al.
TISSUE ENGINEERING PART B-REVIEWS (2018)
Rabbit Calvarial Defect Model for Customized 3D-Printed Bone Grafts
Kang-Gon Lee et al.
TISSUE ENGINEERING PART C-METHODS (2018)
In Vivo Evaluation of 3D-Printed Polycaprolactone Scaffold Implantation Combined with -TCP Powder for Alveolar Bone Augmentation in a Beagle Defect Model
Su A. Park et al.
MATERIALS (2018)
Current state of fabrication technologies and materials for bone tissue engineering
Abiy Wubneh et al.
ACTA BIOMATERIALIA (2018)
Investigation on Electron Beam Melting: Dimensional accuracy and process repeatability
Stefania Franchitti et al.
VACUUM (2018)
Characterization and Preliminary Biological Evaluation of 3D-Printed Porous Scaffolds for Engineering Bone Tissues
Chen-Guang Liu et al.
MATERIALS (2018)
Bioinspired Structural Hierarchy within Macroscopic Volumes of Synthetic Composites
Anand K. Rajasekharan et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Additive Manufacturing for Guided Bone Regeneration: A Perspective for Alveolar Ridge Augmentation
Patrick Rider et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Novel exploration of customized 3D printed shoulder prosthesis in revision of total shoulder arthroplasty A case report
Yun Zou et al.
MEDICINE (2018)
Regulating 3D-printed medical products
Laura M. Ricles et al.
SCIENCE TRANSLATIONAL MEDICINE (2018)
A high-strength mineralized collagen bone scaffold for large-sized cranial bone defect repair in sheep
Shuo Wang et al.
REGENERATIVE BIOMATERIALS (2018)
Scaffold-cell bone engineering in a validated preclinical animal model: precursors vs differentiated cell source
A. Berner et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Ryan Trombetta et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
3D-Printing Technologies for Craniofacial Rehabilitation, Reconstruction, and Regeneration
Ethan L. Nyberg et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Accelerated bony defect healing based on chitosan thermosensitive hydrogel scaffolds embedded with chitosan nanoparticles for the delivery of BMP2 plasmid DNA
Hui Li et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
Effects of 3D-Printed Polycaprolactone/β-Tricalcium Phosphate Membranes on Guided Bone Regeneration
Jin-Hyung Shim et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
Use of fused deposit modeling for additive manufacturing in hospital facilities: European certification directives
Joel J. Otero et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2017)
Biphasic calcium phosphates bioceramics (HA/TCP): Concept, physicochemical properties and the impact of standardization of study protocols in biomaterials research
Mehdi Ebrahimi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Sterilization of collagen scaffolds designed for peripheral nerve regeneration: Effect on microstructure, degradation and cellular colonization
Graziana Monaco et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
The use of 3D-printed titanium mesh tray in treating complex comminuted mandibular fractures A case report
Junli Ma et al.
MEDICINE (2017)
Bone Regenerative Medicine in Oral and Maxillofacial Region Using a Three-Dimensional Printer
Atsuhiko Hikita et al.
TISSUE ENGINEERING PART A (2017)
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
Greeshma Ratheesh et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
Greeshma Ratheesh et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
How useful is 3D printing in maxillofacial surgery?
A. Louvrier et al.
JOURNAL OF STOMATOLOGY ORAL AND MAXILLOFACIAL SURGERY (2017)
Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review
Xiang-Yu Zhang et al.
MATERIALS (2017)
ESR investigations of gamma irradiated medical devices
N. Selcan Turker et al.
APPLIED RADIATION AND ISOTOPES (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
Noam Eliaz et al.
MATERIALS (2017)
Additive manufacturing of polymer melts for implantable medical devices and scaffolds
Almoatazbellah Youssef et al.
BIOFABRICATION (2017)
Effects of different sterilization methods on the physico-chemical and bioresponsive properties of plasma-treated polycaprolactone films
Rouba Ghobeira et al.
BIOMEDICAL MATERIALS (2017)
Effect of the biodegradation rate controlled by pore structures in magnesium phosphate ceramic scaffolds on bone tissue regeneration in vivo
Ju-Ang Kim et al.
ACTA BIOMATERIALIA (2016)
Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review
Shady Farah et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Large Bone Vertical Augmentation Using a Three-Dimensional Printed TCP/HA Bone Graft: A Pilot Study in Dog Mandible
Jean-Pierre Carrel et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2016)
Bone tissue engineering using polyetherketoneketone scaffolds combined with autologous mesenchymal stem cells in a sheep calvarial defect model
Carina Adamzyk et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2016)
Cranioplasty Enhanced by Three-Dimensional Printing: Custom-Made Three-Dimensional-Printed Titanium Implants for Skull Defects
Eun-Kyung Park et al.
JOURNAL OF CRANIOFACIAL SURGERY (2016)
Influence of different sterilization processes on the properties of commercial poly(lactic acid)
M. Savaris et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Reconstruction of an Extensive Midfacial Defect Using Additive Manufacturing Techniques
Nelson Fernandes et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2016)
Dynamic 3D printed titanium copy prosthesis: a novel design for large chest wall resection and reconstruction
Javier Aragon et al.
JOURNAL OF THORACIC DISEASE (2016)
Computed tomographic evaluation of novel custom-made artificial bones, CT-bone, applied for maxillofacial reconstruction
Yuki Kanno et al.
REGENERATIVE THERAPY (2016)
Clinical experience of full custom-made artificial bones for the maxillofacial region
Hideto Saijo et al.
REGENERATIVE THERAPY (2016)
A 3D printed TCP/HA structure as a new osteoconductive scaffold for vertical bone augmentation
Jean-Pierre Carrel et al.
CLINICAL ORAL IMPLANTS RESEARCH (2016)
3D Printing/Additive Manufacturing Single Titanium Dental Implants: A Prospective Multicenter Study with 3 Years of Follow-Up
Samy Tunchel et al.
INTERNATIONAL JOURNAL OF DENTISTRY (2016)
Evaluation of 3D printed PCL/PLGA/β-TCP versus collagen membranes for guided bone regeneration in a beagle implant model
J-Y Won et al.
BIOMEDICAL MATERIALS (2016)
BMP delivery complements the guiding effect of scaffold architecture without altering bone microstructure in critical-sized long bone defects: A multiscale analysis
A. Cipitria et al.
ACTA BIOMATERIALIA (2015)
Effect of different sterilization modes on the surface morphology, ion release, and bone reaction of retrieved micro-implants
Noha El-Wassefy et al.
ANGLE ORTHODONTIST (2015)
Tridimensional titanium-printed custom-made prosthesis for sternocostal reconstruction
Jose L. Aranda et al.
EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY (2015)
Custom-made titanium devices as membranes for bone augmentation in implant treatment: Clinical application and the comparison with conventional titanium mesh
Tomoki Sumida et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2015)
3D-printed Bioresorbable Scaffold for Periodontal Repair
G. Rasperini et al.
JOURNAL OF DENTAL RESEARCH (2015)
Tissue-Engineered Bone With 3-Dimensionally Printed β-Tricalcium Phosphate and Polycaprolactone Scaffolds and Early Implantation: An In Vivo Pilot Study in a Porcine Mandible Model
Sandra Konopnicki et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2015)
In Vivo Behavior of a Custom-Made 3D Synthetic Bone Substitute in Sinus Augmentation Procedures in Sheep
Carlo Mangano et al.
JOURNAL OF ORAL IMPLANTOLOGY (2015)
Mesoporous bioactive glass nanolayer-functionalized 3D-printed scaffolds for accelerating osteogenesis and angiogenesis
Yali Zhang et al.
NANOSCALE (2015)
Nonmulberry Silk Fibroin Scaffold Shows Superior Osteoconductivity Than Mulberry Silk Fibroin in Calvarial Bone Regeneration
Neety Sahu et al.
ADVANCED HEALTHCARE MATERIALS (2015)
Comparative Efficacies of a 3D-Printed PCL/PLGA/β-TCP Membrane and a Titanium Membrane for Guided Bone Regeneration in Beagle Dogs
Jin-Hyung Shim et al.
POLYMERS (2015)
Novel 3D polycaprolactone scaffold for ridge preservation - a pilot randomised controlled clinical trial
Bee Tin Goh et al.
CLINICAL ORAL IMPLANTS RESEARCH (2015)
Influence of the nanostructure of F-doped TiO2 films on osteoblast growth and function
Daniel Lozano et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2015)
3D printing in aerospace and its long-term sustainability
Sunil C. Joshi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
3D printing of octacalcium phosphate bone substitutes
Vladimir S. Komlev et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2015)
3D Artificial Bones for Bone Repair Prepared by Computed Tomography-Guided Fused Deposition Modeling for Bone Repair
Ning Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Surface-modified functionalized polycaprolactone scaffolds for bone repair: In vitro and in vivo experiments
Jonas Jensen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
A specific groove design for individualized healing in a canine partial sternal defect model by a polycaprolactone/hydroxyapatite scaffold coated with bone marrow stromal cells
Yiwen Xuan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
Three-Dimensional Printing of rhBMP-2-Loaded Scaffolds with Long-Term Delivery for Enhanced Bone Regeneration in a Rabbit Diaphyseal Defect
Jin-Hyung Shim et al.
TISSUE ENGINEERING PART A (2014)
Pre-clinical studies of bone regeneration with human bone marrow stromal cells and biphasic calcium phosphate
Meadhbh A. Brennan et al.
STEM CELL RESEARCH & THERAPY (2014)
Customised titanium implant fabricated in additive manufacturing for craniomaxillofacial surgery This paper discusses the design and fabrication of a metallic implant for the reconstruction of a large cranial defect
Andre Luiz Jardini et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2014)
Efficacy of rhBMP-2 loaded PCL/PLGA/β-TCP guided bone regeneration membrane fabricated by 3D printing technology for reconstruction of calvaria defects in rabbit
Jin-Hyung Shim et al.
BIOMEDICAL MATERIALS (2014)
How smart do biomaterials need to be? A translational science and clinical point of view
Boris Michael Holzapfel et al.
ADVANCED DRUG DELIVERY REVIEWS (2013)
Nano-hydroxyapatite-coated PEEK implants: A pilot study in rabbit bone
Sargon Barkarmo et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
A new custom made bioceramic implant for the repair of large and complex craniofacial bone defects
Joel Brie et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Synthetic Bone Substitute Engineered with Amniotic Epithelial Cells Enhances Bone Regeneration after Maxillary Sinus Augmentation
Barbara Barboni et al.
PLOS ONE (2013)
Regulation of Cell-Based Therapies in Europe: Current Challenges and Emerging Issues
Alessandro Blasimme et al.
STEM CELLS AND DEVELOPMENT (2013)
Controlled Release Strategies for Bone, Cartilage, and Osteochondral Engineering-Part I: Recapitulation of Native Tissue Healing and Variables for the Design of Delivery Systems
Vitor E. Santo et al.
TISSUE ENGINEERING PART B-REVIEWS (2013)
Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds
Stefan Lohfeld et al.
ACTA BIOMATERIALIA (2012)
Combination therapy with BMP-2 and BMSCs enhances bone healing efficacy of PCL scaffold fabricated using the 3D plotting system in a large segmental defect model
Sun-Woong Kang et al.
BIOTECHNOLOGY LETTERS (2012)
Stimulation of healing within a rabbit calvarial defect by a PCL/PLGA scaffold blended with TCP using solid freeform fabrication technology
Jin-Hyung Shim et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2012)
Scaffolds for bone tissue engineering fabricated from two different materials by the rapid prototyping technique: PCL versus PLGA
So Hee Park et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2012)
Quantification of the accuracy of MRI generated 3D models of long bones compared to CT generated 3D models
Kanchana Rathnayaka et al.
MEDICAL ENGINEERING & PHYSICS (2012)
Biological Properties of Solid Free Form Designed Ceramic Scaffolds with BMP-2: In Vitro and In Vivo Evaluation
Ander Abarrategi et al.
PLOS ONE (2012)
Patient-specific reconstruction with 3D modeling and DMLS additive manufacturing
Mika Salmi et al.
RAPID PROTOTYPING JOURNAL (2012)
A Tissue Engineering Solution for Segmental Defect Regeneration in Load-Bearing Long Bones
Johannes C. Reichert et al.
SCIENCE TRANSLATIONAL MEDICINE (2012)
Fibroin Scaffold Repairs Critical-Size Bone Defects In Vivo Supported by Human Amniotic Fluid and Dental Pulp Stem Cells
Massimo Riccio et al.
TISSUE ENGINEERING PART A (2012)
Recent advances in bone tissue engineering scaffolds
Susmita Bose et al.
TRENDS IN BIOTECHNOLOGY (2012)
Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model
Jinku Kim et al.
BIOFABRICATION (2012)
Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures
Vaibhav Bagaria et al.
EUROPEAN JOURNAL OF RADIOLOGY (2011)
Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering
Shaun Eshraghi et al.
ACTA BIOMATERIALIA (2010)
Multiscale osteointegration as a new paradigm for the design of calcium phosphate scaffolds for bone regeneration
Sheeny K. Lan Levengood et al.
BIOMATERIALS (2010)
Bone repair by cell-seeded 3D-bioplotted composite scaffolds made of collagen treated tricalciumphosphate or tricalciumphosphate-chitosan-collagen hydrogel or PLGA in ovine critical-sized calvarial defects
Kathrin Haberstroh et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2010)
Autologous Bone Graft: Properties and Techniques
Hans Christoph Pape et al.
JOURNAL OF ORTHOPAEDIC TRAUMA (2010)
Biological performance of a polycaprolactone-based scaffold used as fusion cage device in a large animal model of spinal reconstructive surgery
Sunny A. Abbah et al.
BIOMATERIALS (2009)
Histological evaluation of osteogenesis of 3D-printed poly-lactic-co-glycolic acid (PLGA) scaffolds in a rabbit model
Zigang Ge et al.
BIOMEDICAL MATERIALS (2009)
Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology
Hideto Saijo et al.
JOURNAL OF ARTIFICIAL ORGANS (2009)
Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo
Christopher X. F. Lam et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)
Blended PCL/PLGA scaffold fabrication using multi-head deposition system
Jong Young Kim et al.
MICROELECTRONIC ENGINEERING (2009)
Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
Garrett E. Ryan et al.
BIOMATERIALS (2008)
Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants
Pamela Habibovic et al.
BIOMATERIALS (2008)
MicroCT analysis of hydroxyapatite bone repair scaffolds created via three-dimensional printing for evaluating the effects of scaffold architecture on bone ingrowth
Joshua L. Simon et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Bone repair in rat mandible by rhBMP-2 associated with two carriers
Joao Paulo Mardegan Issa et al.
MICRON (2008)
In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing
Joshua L. Simon et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Computed tomography-based tissue-engineered scaffolds in craniomaxillofacial surgery
M. H. Smith et al.
INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY (2007)
Preparation of porous hydroxyapatite scaffolds
E. Saiz et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)
The influence of sterilization processes on the micromechanical properties of carbon fiber-reinforced PEEK composites for bone implant applications
A. Godara et al.
ACTA BIOMATERIALIA (2007)
Bone graft substitutes
Cato Laurencin et al.
EXPERT REVIEW OF MEDICAL DEVICES (2006)
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
JM Williams et al.
BIOMATERIALS (2005)
Gamma-radiation effect on morphology and properties of TTCP/DCPA-derived calcium phosphate cement
IC Wang et al.
MATERIALS TRANSACTIONS (2005)
Biodegradation of differently cross-linked collagen membranes: an experimental study in the rat
D Rothamel et al.
CLINICAL ORAL IMPLANTS RESEARCH (2005)
Analysis of 3D bone ingrowth into polymer scaffolds via micro-computed tomography imaging
AC Jones et al.
BIOMATERIALS (2004)
Performance of hydroxyapatite bone repair scaffolds created via three-dimensional fabrication techniques
TD Roy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2003)
In vivo efficacy of bone-marrow-coated polycaprolactone scaffolds for the reconstruction of orbital defects in the pig
D Rohner et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2003)
Preparation and characterization of biodegradable PLA polymeric blends
CC Chen et al.
BIOMATERIALS (2003)