相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Francesco Maresca et al.
ACTA MATERIALIA (2020)
Theory of screw dislocation strengthening in random BCC alloys from dilute to High-Entropy alloys
Francesco Maresca et al.
ACTA MATERIALIA (2020)
Investigating active slip planes in tantalum under compressive load: Crystal plasticity and slip trace analyses of single crystals
Hojun Lim et al.
ACTA MATERIALIA (2020)
Atomistic modeling of dislocations in a random quinary high-entropy alloy
Roberto Pasianot et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Comparative modeling of the disregistry and Peierls stress for dissociated edge and screw dislocations in Al
Shuozhi Xu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Correlation analysis of strongly fluctuating atomic volumes, charges, and stresses in body-centered cubic refractory high-entropy alloys
Shoji Ishibashi et al.
PHYSICAL REVIEW MATERIALS (2020)
Unusual dislocation behavior in high-entropy alloys
Evan Ma
SCRIPTA MATERIALIA (2020)
Atomistic simulations of dynamics of an edge dislocation and its interaction with a void in copper: a comparative study
Wu-Rong Jian et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2020)
Dislocation plasticity in FeCoCrMnNi high-entropy alloy: quantitative insights from in situ transmission electron microscopy deformation
Subin Lee et al.
MATERIALS RESEARCH LETTERS (2020)
Complex strengthening mechanisms in the NbMoTaW multi-principal element alloy
Xiang-Guo Li et al.
NPJ COMPUTATIONAL MATERIALS (2020)
Ab initio modeling of the energy landscape for screw dislocations in body-centered cubic high-entropy alloys
Sheng Yin et al.
NPJ COMPUTATIONAL MATERIALS (2020)
Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi
Wu-Rong Jian et al.
ACTA MATERIALIA (2020)
Frank-Read source operation in six body-centered cubic refractory metals
Shuozhi Xu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Unusual activated processes controlling dislocation motion in body-centered-cubic high-entropy alloys
Bing Chen et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)
Low temperature atomic-scale observations of slip traces in niobium
B. Douat et al.
SCRIPTA MATERIALIA (2020)
Atomistic calculations of the generalized stacking fault energies in two refractory multi-principal element alloys
Shuozhi Xu et al.
INTERMETALLICS (2020)
Multiplicity of dislocation pathways in a refractory multiprincipal element alloy
Fulin Wang et al.
SCIENCE (2020)
Quantifying local lattice distortions in alloys
L. R. Owen et al.
SCRIPTA MATERIALIA (2020)
Design using randomness: a new dimension for metallurgy
W. G. Noehring et al.
SCRIPTA MATERIALIA (2020)
The effect of local chemical ordering on Frank-Read source activation in a refractory multi-principal element alloy
Lauren Tw Smith et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Phase-field-based calculations of the disregistry fields of static extended dislocations in FCC metals
Shuozhi Xu et al.
PHILOSOPHICAL MAGAZINE (2019)
Atomic-scale insight into non-crystallographic slip traces in body-centred cubic crystals
Benjamin Douat et al.
SCRIPTA MATERIALIA (2019)
Modeling solution hardening in BCC refractory complex concentrated alloys: NbTiZr, Nb1.5TiZr0.5 and Nb0.5TiZr1.5
S. I. Rao et al.
ACTA MATERIALIA (2019)
Atomistic modeling of dislocation cross-slip in nickel using free-end nudged elastic band method
Dengke Chen et al.
ACTA MATERIALIA (2019)
Analyzing the cross slip motion of screw dislocations at finite temperatures in body-centered-cubic metals: molecular statics and dynamics studies
Tomoaki Suzudo et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
A simplified model connecting lattice distortion with friction stress of Nb-based equiatomic high-entropy alloys
Y. Y. Zhao et al.
MATERIALS RESEARCH LETTERS (2019)
A comparison of different continuum approaches in modeling mixed-type dislocations in Al
Shuozhi Xu et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
Ab initio-informed phase-field modeling of dislocation core structures in equal-molar CoNiRu multi-principal element alloys
Yanqing Su et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
Solute/screw dislocation interaction energy parameter for strengthening in bcc dilute to high entropy alloys
A. Ghafarollahi et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
Tuning element distribution, structure and properties by composition in high-entropy alloys
Qingqing Ding et al.
NATURE (2019)
Modeling dislocations with arbitrary character angle in face-centered cubic transition metals using the phase-field dislocation dynamics method with full anisotropic elasticity
Shuozhi Xu et al.
MECHANICS OF MATERIALS (2019)
Effects of the stacking fault energy fluctuations on the strengthening of alloys
Yifei Zeng et al.
ACTA MATERIALIA (2019)
The effect of randomness on the strength of high-entropy alloys
Luchan Zhang et al.
ACTA MATERIALIA (2019)
Cross-slip of long dislocations in FCC solid solutions
Wolfram Georg Nohring et al.
ACTA MATERIALIA (2018)
Dislocation nucleation from symmetric tilt grain boundaries in body-centered cubic vanadium
Shuozhi Xu et al.
PHYSICS LETTERS A (2018)
Conventional vs harmonic-structured beta-Ti-25Nb-25Zr alloys: A comparative study of deformation mechanisms
F. Mompiou et al.
ACTA MATERIALIA (2018)
Lattice distortion in a strong and ductile refractory high-entropy alloy
Chanho Lee et al.
ACTA MATERIALIA (2018)
MODELING PLASTIC DEFORMATION OF NANO/SUBMICRON-SIZED TUNGSTEN PILLARS UNDER COMPRESSION: A COARSE-GRAINED ATOMISTIC APPROACH
Shuozhi Xu
INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING (2018)
Lattice distortions in high-entropy alloys
Lewis Robert Owen et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Screw dislocation structure and mobility in body centered cubic Fe predicted by a Gaussian Approximation Potential
Francesco Maresca et al.
NPJ COMPUTATIONAL MATERIALS (2018)
Quantum-accurate spectral neighbor analysis potential models for Ni-Mo binary alloys and fcc metals
Xiang-Guo Li et al.
PHYSICAL REVIEW B (2018)
Correlation between lattice distortion and friction stress in Ni-based equiatomic alloys
Y. Y. Zhao et al.
INTERMETALLICS (2017)
Atomic-scale dynamics of edge dislocations in Ni and concentrated solid solution NiFe alloys
Shijun Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Thermodynamics of vacancies and clusters in high-entropy alloys
Zhijun Wang et al.
PHYSICAL REVIEW MATERIALS (2017)
Local lattice distortion in high-entropy alloys
Hongquan Song et al.
PHYSICAL REVIEW MATERIALS (2017)
Atomistic simulations of dislocation behavior in a model FCC multicomponent concentrated solid solution alloy
S. I. Rao et al.
ACTA MATERIALIA (2017)
Dislocation cross-slip in fcc solid solution alloys
Wolfram Georg Nohring et al.
ACTA MATERIALIA (2017)
Atomistic simulations of dislocations in a model BCC multicomponent concentrated solid solution alloy
S. I. Rao et al.
ACTA MATERIALIA (2017)
Ab initio modeling of dislocation core properties in metals and semiconductors
D. Rodney et al.
ACTA MATERIALIA (2017)
Glide of dislocations in <1 1 1>{321} slip system: an atomistic study
D. Terentyev et al.
PHILOSOPHICAL MAGAZINE (2016)
Plastic anisotropy and dislocation trajectory in BCC metals
Lucile Dezerald et al.
NATURE COMMUNICATIONS (2016)
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
Z. Wu et al.
ACTA MATERIALIA (2014)
Simulations of bcc tantalum screw dislocations: Why classical inter-atomic potentials predict {112} slip
Lucas M. Hale et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Efficient stochastic generation of special quasirandom structures
A. van de Walle et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2013)
Slip planes in bcc transition metals
C. R. Weinberger et al.
INTERNATIONAL MATERIALS REVIEWS (2013)
Application of generalized non-Schmid yield law to low-temperature plasticity in bcc transition metals
H. Lim et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)
Peierls potential of screw dislocations in bcc transition metals: Predictions from density functional theory
Christopher R. Weinberger et al.
PHYSICAL REVIEW B (2013)
Onset Mechanism of Strain-Rate-Induced Flow Stress Upturn
Yue Fan et al.
PHYSICAL REVIEW LETTERS (2012)
Singular orientations and faceted motion of dislocations in body-centered cubic crystals
Keonwook Kang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)
Edge dislocation mobilities in bcc Fe obtained by molecular dynamics
S. Queyreau et al.
PHYSICAL REVIEW B (2011)
Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool
Alexander Stukowski
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)
Force-matched embedded-atom method potential for niobium
Michael R. Fellinger et al.
PHYSICAL REVIEW B (2010)
Structure and mobility of the 1/2 <111> {112} edge dislocation in BCC iron studied by molecular dynamics
G. Monnet et al.
ACTA MATERIALIA (2009)
Structural relaxation made simple
Erik Bitzek et al.
PHYSICAL REVIEW LETTERS (2006)
Possible slip systems in body centered cubic iron
Ryuji Watanabe
MATERIALS TRANSACTIONS (2006)
The glide of screw dislocations in bcc Fe: Atomistic static and dynamic simulations
Julien Chaussidon et al.
ACTA MATERIALIA (2006)
Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers
XW Zhou et al.
PHYSICAL REVIEW B (2004)
Dynamic transitions from smooth to rough to twinning in dislocation motion
J Marian et al.
NATURE MATERIALS (2004)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Calculating the Peierls energy and Peierls stress from atomistic simulations of screw dislocation dynamics:: application to bcc tantalum
GF Wang et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
An atomic-level model for studying the dynamics of edge dislocations in metals
YN Osetsky et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2003)
Flexible ab initio boundary conditions:: Simulating isolated dislocations in bcc Mo and Ta -: art. no. 216402
C Woodward et al.
PHYSICAL REVIEW LETTERS (2002)
Ab-initio simulation of isolated screw dislocations in bcc Mo and Ta
C Woodward et al.
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES (2001)