Inexpensive, Three-Dimensional, Open-Cell, Fluid-Permeable, Noble-Metal Electrodes for Electroanalysis and Electrocatalysis

This study describes the fabrication of three-dimensional, open-cell,; noble-metal (Au, Ag, and Pt) electrodes that have a complex geometry, i.e., wire mesh, metallic foam origami wire mesh, and helix wire mesh. The electrodes were fabricated using an ultrasonication-assisted electroplating method that deposits a thin, continuous, and defect-free layer of noble metal (i.e., Au, Ag, or Pt) on an inexpensive copper substrate that has the desired geometry. The method is inexpensive, easy to use, and capable of fabricating noble-metal electrodes of complex geometries that cannot be fabricated using established techniques like screen printing or physical vapor deposition. By minimizing the amount of the pure noble metal in the electrodes, their cost drops significantly and could become low enough even for single-use applications; for example, the cost of metal in a Au wire-mesh electrode is $0.007/cm(2) of exposed area that is about 400 times lower than that of a wire-mesh electrode composed entirely of Au. The electrodes exhibit an almost identical electrochemical performance to noble-metal electrodes of similar shape composed of bulk noble metal; therefore, these electrodes could replace two-dimensional noble-metal electrodes (e.g., rods, disks, foils) in numerous electroanalytical and electrocatalytical systems or even allow the use of noble-metal electrodes in new applications such asp flow-based electrochemical systems. In this study, wire-mesh and metallic foam noble-metal electrodes have been successfully used as working electrodes for the electrocatalytical oxidation of methanol and for the electrochemical detection of redox mediators, lead ions, and nitrobenzene using various electroanalytical techniques.