期刊
ENVIRONMENTAL TECHNOLOGY & INNOVATION
卷 20, 期 -, 页码 -出版社
ELSEVIER
DOI: 10.1016/j.eti.2020.101085
关键词
Batch adsorption; Continuous adsorption; Melanin; Heavy metals; Isotherms
资金
- Department of Science and Technology, Government of India [DST/TSG/WP/2014/58]
The adversity associated with the removal of melanin nanoparticles after adsorbing heavy metals led to the development of a system involving activated carbon on which melanin was effectively impregnated. The melanin impregnated activated carbon was handily removed from the aqueous medium by simple filtration. The batch studies performed to scrutinise the optimum conditions for maximum adsorption concluded the contact time needed to attain equilibrium to be 90 min for all metals of study. Maximum adsorption of Cr (VI) was shown at pH 3 while Hg (II), Pb (II) and Cu (II) was adsorbed efficiently at pH 5. Increase in temperature favoured the adsorption process for all metals showing maximum removal at 328 K. Melanin impregnated activated carbon could adsorb 84.59% Hg (II), 86.6% Cr (VI), 91.1% Pb (II) and 93.8% Cu (II) from 5 mg/L heavy metal solution. Dynamic studies were conducted by varying the parameters like flow rate, inlet heavy metal concentration and adsorbent loading. Optimum conditions for a maximum breakthrough was obtained with a flow rate of 0.5 mL/min, heavy metal inlet concentration of 1 mg/L and adsorbent loading of 100 mg. Experimental data modelled in equilibrium isotherms showed the best fitting with the Thomas model when compared with the Adam-Boharts model using determined coefficient and error analysis. Efficient chemical desorption of Hg (II), Pb (II) and Cu (II) was obtained using 3N HCl and Cr (VI) using 1N citric acid. (C) 2020 Elsevier B.V. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据