相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。3D-printed PLA/HA composite structures as synthetic trabecular bone: A feasibility study using fused deposition modeling
Dan Wu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Adipose-derived stem cell sheets accelerate bone healing in rat femoral defects
Yasuhisa Yoshida et al.
PLOS ONE (2019)
Fibro-Neuronal Guidance on Common, 3D-Printed Textured Substrates
Agata Blasiak et al.
IEEE TRANSACTIONS ON NANOBIOSCIENCE (2019)
Pre-osteoblast cell colonization of porous silicon substituted hydroxyapatite bioceramics: Influence of microporosity and macropore design
Urda Rudrich et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Adipose-derived stem cells prevent the onset of bisphosphonate-related osteonecrosis of the jaw through transforming growth factor-1-mediated gingival wound healing
Xiaolong Zang et al.
STEM CELL RESEARCH & THERAPY (2019)
Promoting Osteogenic Differentiation of Human Adipose-Derived Stem Cells by Altering the Expression of Exosomal miRNA
Shude Yang et al.
STEM CELLS INTERNATIONAL (2019)
Adipose-Derived Stem Cells in Bone Tissue Engineering: Useful Tools with New Applications
Gabriele Storti et al.
STEM CELLS INTERNATIONAL (2019)
Adult Stem Cells for Bone Regeneration and Repair
Maria Rosa Iaquinta et al.
FRONTIERS IN CELL AND DEVELOPMENTAL BIOLOGY (2019)
Critical-Size Bone Defects: Is There a Consensus for Diagnosis and Treatment?
Aaron Nauth et al.
JOURNAL OF ORTHOPAEDIC TRAUMA (2018)
Three-dimensional printed PLA scaffold and human gingival stem cell-derived extracellular vesicles: a new tool for bone defect repair
Francesca Diomede et al.
STEM CELL RESEARCH & THERAPY (2018)
Time-Phase Sequential Utilization of Adipose-Derived Mesenchymal Stem Cells on Mesoporous Bioactive Glass for Restoration of Critical Size Bone Defects
Jiahui Du et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Characterization and Preliminary Biological Evaluation of 3D-Printed Porous Scaffolds for Engineering Bone Tissues
Chen-Guang Liu et al.
MATERIALS (2018)
Risperidone Controlled Release Microspheres Based on Poly(Lactic Acid)-Poly(Propylene Adipate) Novel Polymer Blends Appropriate for Long Acting Injectable Formulations
Stavroula Nanaki et al.
PHARMACEUTICS (2018)
Novel Biomaterials Used in Medical 3D Printing Techniques
Karthik Tappa et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2018)
Adipose-derived stem cell therapies for bone regeneration
Marta Barba et al.
EXPERT OPINION ON BIOLOGICAL THERAPY (2017)
Size Matters: Defining Critical in Bone Defect Size!
Emil H. Schemitsch
JOURNAL OF ORTHOPAEDIC TRAUMA (2017)
Enhancing Cell Proliferation and Osteogenic Differentiation of MC3T3-E1 Pre-osteoblasts by BMP-2 Delivery in Graphene Oxide-Incorporated PLGA/HA Biodegradable Microcarriers
Chuan Fu et al.
SCIENTIFIC REPORTS (2017)
Solvent Based 3D Printing of Biopolymer/Bioactive Glass Composite and Hydrogel for Tissue Engineering Applications
Krishna Kolan et al.
3RD CIRP CONFERENCE ON BIOMANUFACTURING (2017)
Analysis of the in vitro degradation and the in vivo tissue response to bi-layered 3D-printed scaffolds combining PLA and biphasic PLA/bioglass components - Guidance of the inflammatory response as basis for osteochondral regeneration
Mike Barbeck et al.
BIOACTIVE MATERIALS (2017)
Influence of MC3T3-E1 preosteoblast culture on the corrosion of a T6-treated AZ91 alloy
Emily K. Brooks et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2016)
Improving mechanical properties of 13-93 bioactive glass robocast scaffold by poly (lactic acid) and poly (ε-caprolactone) melt infiltration
Siamak Eqtesadi et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)
Poly-(lactic acid) infiltration of 45S5 Bioglass® robocast scaffolds: Chemical interaction and its deleterious effect in mechanical enhancement
Siamak Eqtesadi et al.
MATERIALS LETTERS (2016)
The Use of Adipose Tissue-Derived Progenitors in Bone Tissue Engineering - a Review
Indranil Bhattacharya et al.
TRANSFUSION MEDICINE AND HEMOTHERAPY (2016)
Effects of heterodimeric bone morphogenetic protein-2/7 on osteogenesis of human adipose-derived stem cells
Xiao Zhang et al.
CELL PROLIFERATION (2015)
Biomechanics and Mechanobiology of Trabecular Bone: A Review
Ramin Oftadeh et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Bioactive Glasses: Frontiers and Challenges
Larry L. Hench et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2015)
A simple procedure to improve the surface passivation for single molecule fluorescence studies
Hai Pan et al.
PHYSICAL BIOLOGY (2015)
Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering
Siamak Eqtesadi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Effect of Gamma Irradiation on Structural and Biological Properties of a PLGA-PEG-Hydroxyapatite Composite
Sima Shahabi et al.
SCIENTIFIC WORLD JOURNAL (2014)
In vitro and in vivo Biocompatibility of Alginate Dialdehyde/Gelatin Hydrogels with and without Nanoscaled Bioactive Glass for Bone Tissue Engineering Applications
Ulrike Rottensteiner et al.
MATERIALS (2014)
Effects of Graphene Nanoplatelets and Reduced Graphene Oxide on Poly(lactic acid) and Plasticized Poly(lactic acid): A Comparative Study
Buong Woei Chieng et al.
POLYMERS (2014)
High-resolution PLA-based composite scaffolds via 3-D printing technology
T. Serra et al.
ACTA BIOMATERIALIA (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Bio-Inspired ceramics: promising scaffolds for bone tissue engineering
M. Lopez-Alvarez et al.
3RD INTERNATIONAL CONFERENCE ON TISSUE ENGINEERING (ICTE2013) (2013)
Comparative investigation of the differentiation capability of bone-marrow- and adipose-derived mesenchymal stem cells by qualitative and quantitative analysis
Radhakrishnan Vishnubalaji et al.
CELL AND TISSUE RESEARCH (2012)
Scaffold: A Novel Carrier for Cell and Drug Delivery
Tarun Garg et al.
CRITICAL REVIEWS IN THERAPEUTIC DRUG CARRIER SYSTEMS (2012)
Effects of hydroxyapatite nanoparticles on proliferation and apoptosis of human breast cancer cells (MCF-7)
Ramovatar Meena et al.
JOURNAL OF NANOPARTICLE RESEARCH (2012)
Providing osteogenesis conditions to mesenchymal stem cells using bioactive nanocomposite bone scaffolds
Jung-Ju Kim et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)
Suitability of PLA/TCP for fused deposition modeling
Dietmar Drummer et al.
RAPID PROTOTYPING JOURNAL (2012)
Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives
Qiang Fu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
Polymer/bioactive glass nanocomposites for biomedical applications: A review
Aldo R. Boccaccini et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
Lutz-Christian Gerhardt et al.
MATERIALS (2010)
Bone Tissue Engineering: A Review in Bone Biomimetics and Drug Delivery Strategies
Joshua R. Porter et al.
BIOTECHNOLOGY PROGRESS (2009)
Novel maxillary reconstruction with ectopic bone formation by GMP adipose stem cells
K. Mesimaki et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2009)
3D-Cultivation of bone marrow stromal cells on hydroxyapatite scaffolds fabricated by dispense-plotting and negative mould technique
R. Detsch et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)
In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing
Joshua L. Simon et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting
J. Russias et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
The story of Bioglass®
Larry L. Hench
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2006)
How useful is SBF in predicting in vivo bone bioactivity?
T Kokubo et al.
BIOMATERIALS (2006)
Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering
SS Kim et al.
BIOMATERIALS (2006)
Bone tissue engineering: State of the art and future trends
AJ Salgado et al.
MACROMOLECULAR BIOSCIENCE (2004)
Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems
DW Hutmacher et al.
TRENDS IN BIOTECHNOLOGY (2004)
Selective protein adsorption and blood compatibility of hydroxy-carbonate apatites
S Takemoto et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2004)
Bioresorbable and bioactive polymer/Bioglass® composites with tailored pore structure for tissue engineering applications
AR Boccaccini et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Pore size and pore volume effects on alumina and TCP ceramic scaffolds
S Bose et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2003)
Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints
SJ Hollister et al.
BIOMATERIALS (2002)
Enhanced cell affinity of poly (D,L-lactide) by combining plasma treatment with collagen anchorage
J Yang et al.
BIOMATERIALS (2002)
Scaffolds in tissue engineering bone and cartilage
DW Hutmacher
BIOMATERIALS (2000)
Bioglass ®45S5 stimulates osteoblast turnover and enhances bone formation in vitro:: Implications and applications for bone tissue engineering
ID Xynos et al.
CALCIFIED TISSUE INTERNATIONAL (2000)