相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
G. D. Goh et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)
Microstructure modelling for metallic additive manufacturing: a review
Joel Heang Kuan Tan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Selective Laser Melting and Remelting of Pure Tungsten
Zhengang Xiong et al.
ADVANCED ENGINEERING MATERIALS (2020)
Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum
Swee Leong Sing et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Densification, microstructure and mechanical properties of an Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy printed by selective laser melting
Jiang Bi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Additive Manufacturing of Co-Ni-Ga High-Temperature Shape Memory Alloy: Processability and Phase Transformation Behavior
C. Lauhoff et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Influence of spatter particles contamination on densification behavior and tensile properties of CoCrW manufactured by selective laser melting
Di Wang et al.
OPTICS AND LASER TECHNOLOGY (2020)
Effect of nAl2O3 on the part density and microstructure during the laser-based powder bed fusion of AlSi10Mg composite
Zhenglin Du et al.
RAPID PROTOTYPING JOURNAL (2020)
Influence of Melt-Pool Stability in 3D Printing of NdFeB Magnets on Density and Magnetic Properties
Mateusz Skalon et al.
MATERIALS (2020)
Characterization of AISI 304L stainless steel powder recycled in the laser powder-bed fusion process
Austin T. Sutton et al.
ADDITIVE MANUFACTURING (2020)
Simulation study of the spatter removal process and optimization design of gas flow system in laser powder bed fusion
Xiaobing Zhang et al.
ADDITIVE MANUFACTURING (2020)
Magnetic shielding promotion via the control of magnetic anisotropy and thermal Post processing in laser powder bed fusion processed NiFeMo-based soft magnet
Abd El-Moez A. Mohamed et al.
ADDITIVE MANUFACTURING (2020)
Excellent strength-ductility synergy in metastable high entropy alloy by laser powder bed additive manufacturing
P. Agrawal et al.
ADDITIVE MANUFACTURING (2020)
Microstructure evolution and mechanical property response via 3D printing parameter development of Al-Sc alloy
C. N. Kuo et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
A review of geometric sensitivities in laser metal 3D printing
Vedant Chahal et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Recent Advances on High-Entropy Alloys for 3D Printing
Changjun Han et al.
ADVANCED MATERIALS (2020)
Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders
Daniel Powell et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Effect of scan rotation on the microstructure development and mechanical properties of 316L parts produced by laser powder bed fusion
A. Leicht et al.
MATERIALS CHARACTERIZATION (2020)
Effect of shielding conditions on bead profile and melting behaviour in laser powder bed fusion additive manufacturing
Armando Caballero et al.
ADDITIVE MANUFACTURING (2020)
Automatic generation of alternative build orientations for laser powder bed fusion based on facet clustering
Yuchu Qin et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al-Mn-Sc alloy fabricated by selective laser melting
Qingbo Jia et al.
ACTA MATERIALIA (2020)
Effect of Al3(Sc, Zr) and Mg2Si precipitates on microstructure and tensile properties of selective laser melted Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy
Jiang Bi et al.
INTERMETALLICS (2020)
Superelastic response of low-modulus porous beta-type Ti-35Nb-2Ta-3Zr alloy fabricated by laser powder bed fusion
Noman Hafeez et al.
ADDITIVE MANUFACTURING (2020)
Laser powder bed fusion of titanium-tantalum alloys: Compositions and designs for biomedical applications
Sheng Huang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Scanning strategy dependent tensile properties of selective laser melted GH4169
Y. C. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Hot cracking, crystal orientation and compressive strength of an equimolar CoCrFeMnNi high-entropy alloy printed by selective laser melting
Pengda Niu et al.
OPTICS AND LASER TECHNOLOGY (2020)
Effect of powder reuse on mechanical properties of Ti-6Al-4V produced through selective laser melting
Fernando J. Alamos et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges
C. Buchanan et al.
ENGINEERING STRUCTURES (2019)
Formation of scanning tracks during Selective Laser Melting (SLM) of pure tungsten powder: Morphology, geometric features and forming mechanisms
Meng Guo et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Improvement of densification and microstructure of ASTM A131 EH36 steel samples additively manufactured via selective laser melting with varying laser scanning speed and hatch spacing
Jingjing Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
A comparative study on single-laser and multi-laser selective laser melting AlSi10Mg: defects, microstructure and mechanical properties
Changchun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of working environment and built orientation on the tensile properties of selective laser melted AlSi10Mg alloy
Srinivasa Ch Rakesh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review
Alberta Aversa et al.
MATERIALS (2019)
Selective laser melting of NiTi alloy with superior tensile property and shape memory effect
Zhiwei Xiong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effect of scanning strategy on mechanical properties of selective laser melted Inconel 718
H. Y. Wan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Selective laser melting of a high strength Al-Mn-Sc alloy: Alloy design and strengthening mechanisms
Qingbo Jia et al.
ACTA MATERIALIA (2019)
Additive manufacturing of ceramics for dental applications: A review
Raquel Galante et al.
DENTAL MATERIALS (2019)
Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
Wenhui Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Selective laser melting of Ti-35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior
J. C. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Spatter transport by inert gas flow in selective laser melting: A simulation study
Ahmad Bin Anwar et al.
POWDER TECHNOLOGY (2019)
Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
W. H. Yu et al.
PROGRESS IN MATERIALS SCIENCE (2019)
The fabrication of NiTi shape memory alloy by selective laser melting: a review
Xizhang Chen et al.
RAPID PROTOTYPING JOURNAL (2019)
Revealing hot tearing mechanism for an additively manufactured high-entropy alloy via selective laser melting
Z. Sun et al.
SCRIPTA MATERIALIA (2019)
Synchronized multi-spot scanning strategies for the laser powder bed fusion process
Chun-Yu Tsai et al.
ADDITIVE MANUFACTURING (2019)
Additive manufacturing of soft magnetic materials and components
D. Goll et al.
ADDITIVE MANUFACTURING (2019)
Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
C. Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Ultrahigh-performance TiNi shape memory alloy by 4D printing
H. Z. Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High-density tungsten fabricated by selective laser melting: Densification, microstructure, mechanical and thermal performance
Shifeng Wen et al.
OPTICS AND LASER TECHNOLOGY (2019)
A review on recent developments in binder jetting metal additive manufacturing: materials and process characteristics
Asier Lores et al.
POWDER METALLURGY (2019)
New scanning strategy to reduce warpage in additive manufacturing
Davi Ramos et al.
ADDITIVE MANUFACTURING (2019)
First demonstration of a new additive manufacturing process based on metal extrusion and solid-state bonding
Jorgen Blindheim et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Multi-Laser Powder Bed Fusion Benchmarking-Initial Trials with Inconel 625
H. Wong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effect of overlap rate and pattern on residual stress in selective laser melting
Changpeng Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
Metal additive manufacturing in the commercial aviation industry: A review
Annamaria Gisario et al.
JOURNAL OF MANUFACTURING SYSTEMS (2019)
Effect of scanning strategy on microstructure and mechanical properties of selective laser melted reduced activation ferritic/martensitic steel
C. Y. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructures and properties of an equimolar AlCoCrFeNi high entropy alloy printed by selective laser melting
P. D. Niu et al.
INTERMETALLICS (2019)
Powder Recycling Effects on the Tensile and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts
Patricio E. Carrion et al.
JOM (2019)
Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization
Laura Cordova et al.
JOM (2019)
Process optimization, microstructures and mechanical properties of a Cu-based shape memory alloy fabricated by selective laser melting
Jian Tian et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Refining the Microstructure of Fe-Nd-B by Selective Laser Melting
Dagmar Goll et al.
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2019)
Towards digital metal additive manufacturing via high-temperature drop-on-demand jetting
Marco Simonelli et al.
ADDITIVE MANUFACTURING (2019)
Effects of direct metal deposition combined with intermediate and final milling on part distortipon
Daniel Eisenbarth et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting
Y. J. Liu et al.
MATERIALIA (2019)
A continuous net-like eutectic structure enhances the corrosion resistance of Mg alloys
Cijun Shuai et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2019)
Numerical and experimental assessment of the mechanical properties of 3D printed 18-Ni300 steel trabecular structures produced by Selective Laser Melting - a lean design approach
Franco Concli et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
In situ alloying of elemental Al-Cu12 feedstock using selective laser melting
Rafael Martinez et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Modeling temperature and residual stress fields in selective laser melting
Yingli Li et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
High-strength silicon brass manufactured by selective laser melting
C. Yang et al.
MATERIALS LETTERS (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
Zhongji Sun et al.
NPG ASIA MATERIALS (2018)
Crack monitoring and failure investigation on inkjet printed sandwich structures under quasi-static indentation test
Vishwesh Dikshit et al.
MATERIALS & DESIGN (2018)
3D bioprinting processes: A perspective on classification and terminology
Jia Min Lee et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2018)
Selective laser melting of Zn-Ag alloys for bone repair: microstructure, mechanical properties and degradation behaviour
Cijun Shuai et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Wrapping effect of secondary phases on the grains: increased corrosion resistance of Mg-Al alloys
Cijun Shuai et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Influence of building orientation on the flexural strength of laminated object manufacturing specimens
D. Olivier et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Direct selective laser sintering and melting of ceramics: a review
Swee Leong Sing et al.
RAPID PROTOTYPING JOURNAL (2017)
Investigation of Quasi-Static Indentation Response of Inkjet Printed Sandwich Structures under Various Indenter Geometries
Vishwesh Dikshit et al.
MATERIALS (2017)
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Jingjing Yang et al.
MATERIALS & DESIGN (2016)
Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting
Xipeng Tan et al.
ACTA MATERIALIA (2015)
Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061
Loong-Ee Loh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Interfacial characterization of SLM parts in multi-material processing: Metallurgical diffusion between 316L stainless steel and C18400 copper alloy
Z. H. Liu et al.
MATERIALS CHARACTERIZATION (2014)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Nanocomposites: a review of technology and applications
Robert Bogue
ASSEMBLY AUTOMATION (2011)