相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Machining performance of Inconel 718 using graphene nanofluid in EDM
Kamlesh Paswan et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Erosion characteristics of electrical discharge machining using graphene powder in deionized water as dielectric
Xiangzhi Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Experimental investigation and economic analysis of surfactant (Span-20) in powder mixed electrical discharge machining (PMEDM) of AISI D2 hardened steel
Nor Ain Jamil Hosni et al.
MACHINING SCIENCE AND TECHNOLOGY (2020)
Principles and Characteristics of Different EDM Processes in Machining Tool and Die Steels
Jaber E. Abu Qudeiri et al.
APPLIED SCIENCES-BASEL (2020)
Influence of additive materials on the roughness of AISI D2 steel in electrical discharge machining (EDM) environmentEinfluss additiver Materialien auf die Rauheit von AISI D2 Stahl in funkenerosiver (EDM) Umgebung
M. A. Abbas et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2020)
Magnetic Field Influence on Surface Modifications in Powder Mixed EDM
Preetkanwal Singh Bains et al.
SILICON (2019)
Multi-response optimization of the machining characteristics in electrical discharge machining (EDM) using span-20 surfactant and chromium (Cr) powder mixed
N. A. J. Hosni et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2019)
Fabrication and experimental investigation of magnetic field assisted powder mixed electrical discharge machining on machining of aluminum 6061 alloy
Arun Kumar Rouniyar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)
Investigation of the Influence of Reduced Graphene Oxide Flakes in the Dielectric on Surface Characteristics and Material Removal Rate in EDM
Rafal Swiercz et al.
MATERIALS (2019)
Advanced Electric Discharge Machining of Stainless Steels: Assessment of the State of the Art, Gaps and Future Prospect
Jaber E. Abu Qudeiri et al.
MATERIALS (2019)
An Ultra-High-Energy Density Supercapacitor; Fabrication Based on Thiol-functionalized Graphene Oxide Scrolls
Janardhanan R. Rani et al.
NANOMATERIALS (2019)
The Effects of Reduced Graphene Oxide Flakes in the Dielectric on Electrical Discharge Machining
Rafal Swiercz et al.
NANOMATERIALS (2019)
Influence of machining parameters on wire electrical discharge machining performance of reduced graphene oxide/magnesium composite and its surface integrity characteristics
V. Kavimani et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of aluminium and chromium powder mixed dielectric fluid on electrical discharge machining effectiveness
M. Modi et al.
ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT (2019)
Effect of deep cryotreated tungsten carbide electrode and SiC powder on EDM performance of AISI 304
Munmun Bhaumik et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2019)
Experimental investigations on nano powder mixed Micro-Wire EDM process of inconel-718 alloy
P. Sivaprakasam et al.
MEASUREMENT (2019)
Surface modification of 316L SS with HAp nano-particles using PMEDM for enhanced Biocompatibility
Yubraj Lamichhane et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Machining performance and influence of process parameters on stainless steel 316L using die-sinker EDM with Cu tool
Gurpreet Singh et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Improving the machining performance characteristics of the mu EDM drilling process by the online cryogenic cooling approach
R. Manivannan et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Performance evaluation of Al2O3 nano powder mixed dielectric for electric discharge machining of Inconel 825
Amit Kumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Magnetic Field Assisted EDM: New Horizons for Improved Surface Properties
Preetkanwal Singh Bains et al.
SILICON (2018)
Electric discharge machining of titanium and its alloys: review
Jaber E. Abu Qudeiri et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
The influences of various mixed dielectric fluids on the performance electrical discharge machining of AISI D2 hardened steel
M. A. Lajis et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2018)
Effects of Addition of Copper Powder in the Dielectric Media (EDM Oil) on Electro-Discharge Machining Performance of Inconel 718 Super Alloys
Binay Kumar Paul et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Improvement of MRR and surface roughness during electrical discharge machining (EDM) using aluminum oxide powder mixed dielectric fluid
A. A. Khan et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2017) (2018)
The influence of Span-20 surfactant and micro-/nano-Chromium (Cr) Powder Mixed Electrical Discharge Machining (PMEDM) on the surface characteristics of AISI D2 hardened steel
N. A. J. Hosni et al.
INTERNATIONAL CONFERENCE ON INNOVATIVE TECHNOLOGY, ENGINEERING AND SCIENCES 2018 (ICITES 2018) (2018)
The Effects of Graphite Powder on Tool Wear in Micro Electrical Discharge Machining
Yoo-Seok Kim et al.
19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)
Aluminium powder mixed rotary electric discharge machining (PMEDM) on Inconel 718
Sagar Patel et al.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2018)
Multi-objective parametric optimization of nano powder mixed electrical discharge machining of AlSiCp using response surface methodology and particle swarm optimization
Shalini Mohanty et al.
ALEXANDRIA ENGINEERING JOURNAL (2018)
Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review
Mehdi Hourmand et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
State of the art in powder-mixed electric discharge machining: A review
Gangadharudu Talla et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Effects of hybrid electrical discharge machining processes on surface integrity and residual stresses of Ti-6Al-4V titanium alloy
Behnam Khosrozadeh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Surface modification of biomaterial embedded with pits using die sinker machine
D. M. Razak et al.
SCIENTIA IRANICA (2017)
State of the art in powder mixed dielectric for EDM applications
Houriyeh Marashi et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)
Steps towards green manufacturing through EDM process: A review
Nishant K. Singh et al.
COGENT ENGINEERING (2016)
A Study on Plasma Channel Expansion in Micro-EDM
Xuyang Chu et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
ANALYSIS OF MRR AND TWR ON OHNS DIE STEEL WITH DIFFERENT ELECTRODES USING ELECTRICAL DISCHARGE MACHINING
S. Nallusamy
INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA (2016)
Effect of TiN powder mixed in Electrical Discharge Machining
A. Muttamara et al.
2016 SECOND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND AUTOMATION SCIENCE (ICMEAS 2016) (2016)
Employing Ti nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D2 steel
Houriyeh Marashi et al.
APPLIED SURFACE SCIENCE (2015)
Influence of surfactant and graphite powder concentration on electrical discharge machining of PH17-4 stainless steel
V. Vikram Reddy et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2015)
Experimental Investigation of Magnetic Field Assisted Powder Mixed Electric Discharge Machining
Geeta Bhatt et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2015)
Adaptive neuro fuzzy inference system modelling of multi-objective optimisation of electrical discharge machining process using single-wall carbon nanotubes
S. Prabhu et al.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2015)
Effect of electrode material on electrical discharge machining of tool steel surface
Mona A. Younis et al.
AIN SHAMS ENGINEERING JOURNAL (2015)
Investigation on the influence of the dielectrics on the material removal characteristics of EDM
Yanzhen Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Sinking EDM in water-in-oil emulsion
Yanzhen Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Estimating the effect of process parameters on MRR, TWR and radial overcut of EDMed AISI D2 tool steel by RSM and GRA coupled with PCA
M. K. Pradhan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Experimental Characterization of Sinking Electrical Discharge Machining Using Water in Oil Emulsion as Dielectric
Yonghong Liu et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Mathematical modeling of aerosol emission from die sinking electrical discharge machining process
Sivapirakasam Suthangathan Paramashivan et al.
APPLIED MATHEMATICAL MODELLING (2012)
Performance Evaluation of Electrical Discharge Machining (EDM) Process Using Cryogenically Cooled Electrode
Vineet Srivastava et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
Multi-objective parametric optimization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm
Soumyakant Padhee et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2012)
Thermal processes during high-voltage electric discharge consolidation of powder materials
Evgeny G. Grigoryev et al.
SCRIPTA MATERIALIA (2012)
Study on the nano-powder-mixed sinking and milling micro-EDM of WC-Co
Muhammad Pervej Jahan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Analysis of Machining Characteristics in Additive Mixed Electric Discharge Machining of Nickel-Based Super Alloy Inconel 718
Anil Kumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
Surface modification of die steel materials by EDM method using tungsten powder-mixed dielectric
Sanjeev Kumar et al.
Journal of Manufacturing Processes (2011)
Optimization of Process Parameters on EDM Milling of Stainless Steel AISI 304
A. K. M. Asif Iqbal et al.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2 (2011)
Optimization of Material Removal Rate in Micro-EDM Using Artificial Neural Network and Genetic Algorithms
K. P. Somashekhar et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Influence of electrical conditions on performance of electrical discharge machining with powder suspended in working oil for titanium carbide deposition process
Katsushi Furutani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Surface modification by electrical discharge machining: A review
Sanjeev Kumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Numerical simulation of powder mixed electric discharge machining (PMEDM) using finite element method
H. K. Kansal et al.
MATHEMATICAL AND COMPUTER MODELLING (2008)
Effect of the powder concentration and dielectric flow in the surface morphology in electrical discharge machining with powder-mixed dielectric (PMD-EDM)
Paulo Pecas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method
S. S. Mahapatra et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Technology and research developments in powder mixed electric discharge machining (PMEDM)
H. K. Kansal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Surface quality improvement of wire-EDM using a fine-finish power supply
Mu-Tian Yan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Electrical discharge machining: Occupational hygienic characterization using emission-based monitoring
Sven Evertz et al.
INTERNATIONAL JOURNAL OF HYGIENE AND ENVIRONMENTAL HEALTH (2006)
Numerical study of thermal aspects of electric discharge machining process
Nizar Ben Salah et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Investigation into some surface characteristics of electrical discharge machined SKD-11 using powder-suspension dielectric oil
YF Tzeng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Parametric optimization of powder mixed electrical discharge machining by response surface methodology
HK Kansal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
State of the art in wire electrical discharge machining (WEDM)
KH Ho et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
The study of high efficiency and intelligent optimization system in EDM sinking processl
FG Cao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Microstructure at submicron scale of the white layer produced by EDM technique
G Cusanelli et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
The effects of powder suspended dielectrics on the thermal influenced zone by electrodischarge machining with small discharge energies
F Klocke et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
A review on the use of environmentally-friendly dielectric fluids in electrical discharge machining
FN Leao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
The study of EDM hole-drilling method for measuring residual stress in SKD11 tool steel
HT Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Effect of EDM process parameters on 3D surface topography
H Ramasawmy et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Improvement of dry EDM characteristics using piezoelectric actuator
M Kunieda et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Effect of electrical discharge machining on surface characteristics and machining damage of AISI D2 tool steel
YH Guu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
A study of ultrasonically aided micro-electrical-discharge machining by the application of workpiece vibration
CS Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Workpiece surface modification using electrical discharge machining
J Simao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Influence of silicon powder-mixed dielectric on conventional electrical discharge machining
P Pecas et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
The application of research on powder mixed EDM in rough machining
WS Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Surface alloying using PM composite electrode materials when electrical discharge texturing hardened AISI D2
J Simao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Thermal stresses due to electrical discharge machining
V Yadav et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
High precision simulation of WEDM using parametric programming
F Han et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
Semi-empirical model of surface finish on electrical discharge machining
KM Tsai et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Semi-empirical model on work removal and tool wear in electrical discharge machining
PJ Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid
K Furutani et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2001)
Effects of powder characteristics on electrodischarge machining efficiency
YF Tzeng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2001)
A new method of optimising material removal rate using EDM with copper-tungsten electrodes
J Marafona et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2000)
分享论文
