相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/ PEEK and GF/PEEK
Peng Wang et al.
CHINESE JOURNAL OF AERONAUTICS (2021)
Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?
Cemile Basgul et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Multifactor optimization of FDM process parameters for development of rapid tooling using SiC/Al2O3-reinforced LDPE filament
Piyush Bedi et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2020)
Mechanical characterization of biocompatible PEEK by FDM
Yachen Zhao et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Fabrication and properties of poly(vinyl alcohol)/β-tricalcium phosphate composite scaffolds via fused deposition modeling for bone tissue engineering
Gang Chen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
A study of the influence of processing parameters on steering of carbon Fibre/PEEK tapes using laser-assisted tape placement
Geardid Clancy et al.
COMPOSITES PART B-ENGINEERING (2019)
3D printing of polyether-ether-ketone for biomedical applications
Sunpreet Singh et al.
EUROPEAN POLYMER JOURNAL (2019)
Poly(vinyl alcohol) 3D printed tablets: The effect of polymer particle size on drug loading and process efficiency
Marilena Saviano et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism
Qiushi Li et al.
POLYMERS (2019)
Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications
Xingting Han et al.
JOURNAL OF CLINICAL MEDICINE (2019)
On the thermal processing and mechanical properties of 3D-printed polyether ether ketone
Russell Wang et al.
MRS COMMUNICATIONS (2019)
An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants
Xingting Han et al.
JOURNAL OF CLINICAL MEDICINE (2019)
Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK
Peng Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM
Shouling Ding et al.
POLYMER TESTING (2019)
Room temperature extrusion 3D printing of polyether ether ketone using a stimuli-responsive binder
Chang-Uk Lee et al.
ADDITIVE MANUFACTURING (2019)
Modeling of surface roughness based on heat transfer considering diffusion among deposition filaments for FDM 3D printing heat-resistant resin
Peng Wang et al.
APPLIED THERMAL ENGINEERING (2019)
Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts
Bin Hu et al.
MECHANICS OF MATERIALS (2019)
3D printed polymers are less stable than injection moulded counterparts when exposed to terminal sterilization processes using novel vaporized hydrogen peroxide and electron beam processes
Yuanyuan Chen et al.
POLYMER (2019)
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Jana Herzberger et al.
PROGRESS IN POLYMER SCIENCE (2019)
Comparison of fused-filament fabrication to direct compression and injection molding in the manufacture of oral tablets
Evert Fuenmayor et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament
Peng Geng et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Investigations for tool life of 3D printed HDPE and LDPE composite based rapid tooling for thermoplastics machining applications
Piyush Bedi et al.
ENGINEERING RESEARCH EXPRESS (2019)
Thermal, mechanical, and tribological properties of short carbon fibers/PEEK composites
Fangfang Li et al.
HIGH PERFORMANCE POLYMERS (2018)
Preparation of poly(vinyl alcohol)/poly(lactic acid)/hydroxyapatite bioactive nanocomposites for fused deposition modeling
Jintian Wu et al.
POLYMER COMPOSITES (2018)
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
David Stoof et al.
COMPOSITES PART B-ENGINEERING (2018)
3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties
A. A. Stepashkin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Structure-property relationships for 3D-printed PEEK intervertebral lumbar cages produced using fused filament fabrication
Cemile Basgul et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Preparation of novel thermoplastic poly(vinyl alcohol) with improved processability for fused deposition modeling
Jintian Wu et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2018)
Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
Xiaohu Deng et al.
MATERIALS (2018)
Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications
Feng Zhao et al.
MATERIALS (2018)
Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
Gianluca Cicala et al.
MATERIALS (2018)
Independent Evaluation of Medical-Grade Bioresorbable Filaments for Fused Deposition Modelling/Fused Filament Fabrication of Tissue Engineered Constructs
Mina Mohseni et al.
POLYMERS (2018)
Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application
Philipp Honigmann et al.
BIOMED RESEARCH INTERNATIONAL (2018)
Performance of biocompatible PEEK processed by fused deposition additive manufacturing
M. F. Arif et al.
MATERIALS & DESIGN (2018)
A study of creep in polycarbonate fused deposition modelling parts
Antonio G. Salazar-Martin et al.
MATERIALS & DESIGN (2018)
Flexural fatigue properties of polycarbonate fused-deposition modelling specimens
Josep M. Puigoriol-Forcada et al.
MATERIALS & DESIGN (2018)
Screw extrusion-based additive manufacturing of PEEK
Jian-Wei Tseng et al.
MATERIALS & DESIGN (2018)
Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms
Evert Fuenmayor et al.
PHARMACEUTICS (2018)
3D structured nanocomposites by FDM process: a novel approach for large-scale photocatalytic applications
Z. Viskadourakis et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Degradable Nanocomposites for Fused Filament Fabrication Applications
Andrew Healy et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2018)
Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
Matthias Fischer et al.
JOM (2017)
Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
Chuncheng Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
Ze-Xian Low et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
Lu Wang et al.
POLYMER (2017)
Melt processing and mechanical property characterization of high-performance poly(ether ether ketone)-carbon nanotube composite
Marianna Rinaldi et al.
POLYMER INTERNATIONAL (2017)
Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
S. Berretta et al.
POLYMER TESTING (2017)
Effect of Nanodiamond (ND) Surface Functionalization on the Properties of ND/PEEK Composites
Zahidul Wahab et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2017)
Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure
Michael Arthur Cuiffo et al.
APPLIED SCIENCES-BASEL (2017)
Measurements of the mechanical response of unidirectional 3D-printed PLA
Y. Song et al.
MATERIALS & DESIGN (2017)
Microstructured monofilament via thermal drawing of additively manufactured preforms
P. M. Toal et al.
ADDITIVE MANUFACTURING (2017)
Influence of processing and orientation print effects on the mechanical and thermal behavior of 3D-Printed ULTEM (R) 9085 Material
R. J. Zaldivar et al.
ADDITIVE MANUFACTURING (2017)
AgNPs-decorated 3D printed PEEK implant for infection control and bone repair
Lijun Deng et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2017)
The impact of print orientation and raster pattern on fracture toughness in additively manufactured ABS
Tait D. McLouth et al.
ADDITIVE MANUFACTURING (2017)
Engineering thermoplastics for additive manufacturing: a critical perspective with experimental evidence to support functional applications
Gianluca Cicala et al.
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2017)
3D printing with polymers: Challenges among expanding options and opportunities
Jeffrey W. Stansbury et al.
DENTAL MATERIALS (2016)
All-Polystyrene 3D-Printed Electrochemical Device with Embedded Carbon Nanofiber-Graphite-Polystyrene Composite Conductor
Zuhayr Rymansaib et al.
ELECTROANALYSIS (2016)
Improving PEEK bioactivity for craniofacial reconstruction using a 3D printed scaffold embedded with mesenchymal stem cells
Michael Roskies et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2016)
Progress in selective laser sintering using metallic powders: a review
S. Singh et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer
M. Zalaznik et al.
TRIBOLOGY INTERNATIONAL (2016)
Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics
Shariq Najeeb et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2016)
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Michael Dawoud et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
In-situ monitoring of strain and temperature distributions during fused deposition modeling process
Charoula Kousiatza et al.
MATERIALS & DESIGN (2016)
Viscoelastic properties of rapid prototyped magnetic nanocomposite scaffolds for osteochondral tissue regeneration
Roberto De Santis et al.
SECOND CIRP CONFERENCE ON BIOMANUFACTURING (2016)
Influence of inter-layer cooling time on the quasi-static properties of ABS components produced via Fused Deposition Modelling
M. Faes et al.
18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) (2016)
High-strength, surface-porous polyether-ether-ketone for load-bearing orthopedic implants
Nathan T. Evans et al.
ACTA BIOMATERIALIA (2015)
Mechanical impact behavior of polyether-ether-ketone (PEEK)
D. Garcia-Gonzalez et al.
COMPOSITE STRUCTURES (2015)
Processability of PEEK, a new polymer for High Temperature Laser Sintering (HT-LS)
S. Berretta et al.
EUROPEAN POLYMER JOURNAL (2015)
Effects of processing parameters and thermal history on microcellular foaming behaviors of PEEK using supercritical CO2
Quan Yang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Porous poly-ether ether ketone (PEEK) manufactured by a novel powder route using near-spherical salt bead porogens: Characterisation and mechanical properties
Abdur R. Siddiq et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2015)
Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
Wenzheng Wu et al.
MATERIALS (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Miquel Domingo-Espin et al.
MATERIALS & DESIGN (2015)
Extrusion-based additive manufacturing of PEEK for biomedical applications
Mohammad Vaezi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing
Angel R. Torrado et al.
ADDITIVE MANUFACTURING (2015)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
Carmen R. Rocha et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printing
W. Z. Wu et al.
MATERIALS RESEARCH INNOVATIONS (2014)
Crystallization behavior and morphological characterization of poly(ether ether ketone)
Lin Jin et al.
POLYMER (2014)
The effects of UV irradiation to polyetheretherketone fibres - Characterization by different techniques
Ville Myllari et al.
POLYMER DEGRADATION AND STABILITY (2014)
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Jyrki Korpela et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Coating of carbon fiber-reinforced polyetheretherketone implants with titanium to improve bone apposition
Declan M. Devine et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Effects of the mold temperature on the mechanical properties and crystallinity of hydroxyapatite whisker-reinforced polyetheretherketone scaffolds
Timothy L. Conrad et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process
Antreas Kantaros et al.
MATERIALS & DESIGN (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Poly(phenylene sulphide) and poly(ether ether ketone) composites reinforced with single-walled carbon nanotube buckypaper: I - Structure, thermal stability and crystallization behaviour
Ana M. Diez-Pascual et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Investigation of the thermal decomposition and flammability of PEEK and its carbon and glass-fibre composites
Parina Patel et al.
POLYMER DEGRADATION AND STABILITY (2011)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
High performance PEEK/carbon nanotube composites compatibilized with polysulfones-II. Mechanical and electrical properties
Ana M. Diez-Pascual et al.
CARBON (2010)
Mechanism of thermal decomposition of poly(ether ether ketone) (PEEK) from a review of decomposition studies
Parina Patel et al.
POLYMER DEGRADATION AND STABILITY (2010)
Development and characterization of PEEK/carbon nanotube composites
Ana M. Diez-Pascual et al.
CARBON (2009)
Properties of High Modulus PEEK Yarns for Aerospace Applications
R. Indu Shekar et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
PEEK biomaterials in trauma, orthopedic, and spinal implants
Steven M. Kurtz et al.
BIOMATERIALS (2007)
Selective laser sintering of PEEK
M. Schmidt et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Design and preparation of polymeric scaffolds for tissue engineering
Thomas Weigel et al.
EXPERT REVIEW OF MEDICAL DEVICES (2006)
Photodegradation of PEEK sheets under tensile stress
H Nakamura et al.
POLYMER DEGRADATION AND STABILITY (2006)
Internal plate fixation of fractures: short history and recent developments
HK Uhthoff et al.
JOURNAL OF ORTHOPAEDIC SCIENCE (2006)
Lasers and materials in selective laser sintering
JP Kruth et al.
ASSEMBLY AUTOMATION (2003)
New trends in rapid product development
A Bernard et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
分享论文
