相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Static and dynamic mechanical analysis of geometrically different kenaf/PLA green composite laminates
Ankit Manral et al.
POLYMER COMPOSITES (2020)
Influence of Braiding Angle on Multiple Impact Damages of 3-D Braided Composite along Longitudinal Direction
Xingzhong Gao et al.
APPLIED COMPOSITE MATERIALS (2019)
Mechanical behavior of woven natural fiber fabric composites: Effect of weaving architecture, intra-ply hybridization and stacking sequence of fabrics
M. Rajesh et al.
JOURNAL OF INDUSTRIAL TEXTILES (2018)
Development & Characterization of Green Composites Using Novel 3D Woven Preforms
Yasir Nawab et al.
APPLIED COMPOSITE MATERIALS (2018)
X-ray 3D microscopy analysis of fracture mechanisms for 3D orthogonal woven E-glass/epoxy composites with drilled and moulded-in holes
Fujun Xu et al.
COMPOSITES PART B-ENGINEERING (2018)
Enhanced through-plane thermal conductivity of PTFE composites with hybrid fillers of hexagonal boron nitride platelets and aluminum nitride particles
Chen Pan et al.
COMPOSITES PART B-ENGINEERING (2018)
Evaluation of stiffness in a cellulose fiber reinforced epoxy laminates for structural applications: Experimental and finite element analysis
Furkan Ahmad et al.
DEFENCE TECHNOLOGY (2018)
Micromechanical modeling of 8-harness satin weave glass fiber-reinforced composites
R. S. Choudhry et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Investigation of mechanical behavior of woven/knitted hybrid composites
Waqas Ashraf et al.
JOURNAL OF THE TEXTILE INSTITUTE (2017)
Effects of needle-punched nonwoven structure on the properties of sandwich flexible composites under static loading and low-velocity impact
Ruosi Yan et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Studies on Mechanical and Morphological Characterization of Developed Jute/Hemp/Flax Reinforced Hybrid Composites for Structural Applications
Vijay Chaudhary et al.
Journal of Natural Fibers (2017)
Comparison of Mechanical Properties of Unidirectional and Woven Carbon, Glass and Aramid Fiber Reinforced Epoxy Composites
S. Eksi et al.
ACTA PHYSICA POLONICA A (2017)
Effects of weave architecture and mesoscale material properties on the macroscale mechanical response of advanced woven fabrics
Ozan Erol et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Mechanical analysis of 3D braided and woven composites using fiber-based continuum analysis
Hyunchul Ahn et al.
COMPOSITE STRUCTURES (2017)
Dynamic mechanical analysis and free vibration behavior of intra-ply woven natural fiber hybrid polymer composite
M. Rajesh et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Influence of the Geometric Parameters on the Mechanical Behaviour of Fabric Reinforced Composite Laminates
Andrei Axinte et al.
APPLIED COMPOSITE MATERIALS (2016)
A comparative study of twill weave reinforced composites under tension-tension fatigue loading: Experiments and meso-modelling
J. Xu et al.
COMPOSITE STRUCTURES (2016)
Three-dimensional needle-punching for composites - A review
Xiaoming Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A review of recent developments in natural fibre composites and their mechanical performance
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Friction and wear durability study of epoxy-based polymer (SU-8) composite coatings with talc and graphite as fillers
Jitendra K. Katiyar et al.
WEAR (2016)
Drape Behavior of 3D Woven Glass-Epoxy Composites
Rajesh Mishra
POLYMER COMPOSITES (2016)
The Effect of Various Weave Designs on Mechanical Behavior of Lamina Intraply Composite Made from Kenaf Fiber Yarn
M. Y. Yuhazri et al.
INTERNATIONAL ENGINEERING RESEARCH AND INNOVATION SYMPOSIUM (IRIS) (2016)
The mechanical performance of sugar palm fibres (ijuk) reinforced phenolic composites
Bushra Rashid et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Numerical evaluation of effective elastic properties of composites reinforced by spatially randomly distributed short fibers with certain aspect ratio
Lehua Qi et al.
COMPOSITE STRUCTURES (2015)
Influence of fibre architecture on the tensile, compressive and flexural behaviour of 3D woven composites
S. Dai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Estimating mechanical properties of 2D triaxially braided textile composites based on microstructure properties
Zachary T. Kier et al.
COMPOSITES PART B-ENGINEERING (2015)
Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites
Seyyedvahid Mortazavian et al.
COMPOSITES PART B-ENGINEERING (2015)
Torsional behaviour of filament wound kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts
S. Misri et al.
MATERIALS & DESIGN (2015)
Effect of nano-fillers on the thermal conductivity of epoxy composites with micro-Al2O3 particles
Zhifang Gao et al.
MATERIALS & DESIGN (2015)
Progressive damage in satin weave carbon/epoxy composites under quasi-static punch-shear loading
Yuan Liang et al.
POLYMER TESTING (2015)
Influences of weaving architectures on the impact resistance of multi-layer fabrics
Cheng-Chou Yang et al.
MATERIALS & DESIGN (2015)
Prediction of mechanical properties of three-dimensional fabric composites reinforced by transversely isotropic carbon fibers
Zhong Hu et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Microstructures and mechanical properties of three-dimensional ceramic filler modified carbon/carbon composites
Yanzhi Cai et al.
CERAMICS INTERNATIONAL (2014)
Evaluating the effects of multi-walled carbon nanotubes on the mechanical properties of chopped strand mat/polyester composites
M. M. Shokrieh et al.
MATERIALS & DESIGN (2014)
A Novel Fiber-Spacing Model of Tensile Modulus Enhancement by Shortening Fibers to Sub-Millimeter in an Injection-Molded Glass Fiber Reinforced Polymer Bulk Molding Compound (GFRP-BMC)
Michael C. Faudree et al.
MATERIALS TRANSACTIONS (2014)
A Comparative Investigation of Bio Waste Filler (Wood Apple-Coconut) Reinforced Polymer Composites
Shakuntala Ojha et al.
POLYMER COMPOSITES (2014)
Influence of crimp on 3D-woven fibre reinforced composites
Fredrik Stig et al.
COMPOSITE STRUCTURES (2013)
The effect of stacking sequence on the impact and post-impact behavior of woven/knit fabric glass/epoxy hybrid composites
Alaattin Aktas et al.
COMPOSITE STRUCTURES (2013)
Buckling of sandwich columns reinforced by triaxial weave fabric composite skin-sheets
Ahmad B. H. Kueh
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Carbon and glass hierarchical fibers: Influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites
S. Rahmanian et al.
MATERIALS & DESIGN (2013)
In-plane shear response of unidirectional fiber reinforced and fabric reinforced carbon/epoxy composites
Yuan Liang et al.
POLYMER TESTING (2013)
Meso-scale finite element modeling of triaxial woven fabrics for composite in-plane reinforcement properties
Rajesh Mishra
TEXTILE RESEARCH JOURNAL (2013)
Mechanical Properties of Jute Spun Yarn/PLA Tubular Braided Composite by Pultrusion Molding
Anin Memon et al.
10TH ECO-ENERGY AND MATERIALS SCIENCE AND ENGINEERING SYMPOSIUM (2013)
Characterization of Biaxial and Triaxial Braids: Fiber Architecture and Mechanical Properties
Karin Birkefeld et al.
APPLIED COMPOSITE MATERIALS (2012)
Mechanical and Dynamic Mechanical Analysis of Woven Banana/Epoxy Composite
N. Venkateshwaran et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2012)
Polypropylene/glass fibre 3D-textile reinforced composites for automotive applications
W. Hufenbach et al.
MATERIALS & DESIGN (2011)
Preparation and characterization of an epoxy nanocomposite toughened by a combination of thermoplastic, layered and particulate nano-fillers
A. Mirmohseni et al.
MATERIALS & DESIGN (2010)
Mechanical properties of a 3D needled C/SiC composite with graphite filler
Yanzhi Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Characterising Mechanical Properties of Braided and Woven Textile Composite Beams
Benjamin Dauda et al.
APPLIED COMPOSITE MATERIALS (2009)
Assessment of the mechanical properties of a new 3D woven fibre composite material
Fredrik Stig et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites
Q. Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Tensile fatigue properties of a 3D orthogonal woven composite
S. Rudov-Clark et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Influence of weave of carbon fabric in polyetherimide composites in various wear situations
Jayashree Bijwe et al.
WEAR (2007)
Mechanical performance of hybrid bismaleimide composites reinforced with three-dimensional braided carbon and Kevlar fabrics
Y. Z. Wan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Comparison of the mechanical behavior of plain weave and plain weft knit jute fabric-polyester-reinforced composites
L. H. de Carvalho et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2006)
Influence of different woven geometry in poly(propylene) woven composites
S Houshyar et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2005)
Evaluation of the physical and mechanical properties of braided fabrics and their composites
KM Charlebois et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2005)
Mechanical properties of three-dimensional braided composites
X Sun et al.
COMPOSITE STRUCTURES (2004)
The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 - polyester resin matrix
SH Aziz et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Performance of stitched/unstitched woven carbon/epoxy composites under high velocity impact loading
MV Hosur et al.
COMPOSITE STRUCTURES (2004)
Effect of punching density on the mechanical and thermal properties of needle-punched nonwoven carbon/phenolic composites
TJ Kang et al.
POLYMERS & POLYMER COMPOSITES (2002)
The influence of fibre treatment on the performance of coir-polyester composites
J Rout et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Transverse properties of unidirectional glass/epoxy composites: influence of fibre surface treatments
K Benzarti et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Mechanical behavior of a triaxial woven fabric composite
ML Dano et al.
MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES (2000)
On the flexural and extensional behavior of a large-tow triaxial braided composite
E Zywicz et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
The potential of knitting fbr engineering composites - a review
KH Leong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)