相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Non-destructive dose verification of two drugs within 3D printed polyprintlets
Sarah J. Trenfield et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Personalised 3D Printed Medicines: Optimising Material Properties for Successful Passive Diffusion Loading of Filaments for Fused Deposition Modelling of Solid Dosage Forms
Jose R. Cerda et al.
PHARMACEUTICS (2020)
Stereolithography (SLA) 3D printing of an antihypertensive polyprintlet: Case study of an unexpected photopolymer-drug reaction
Xiaoyan Xu et al.
ADDITIVE MANUFACTURING (2020)
3D printed, controlled release, tritherapeutic tablet matrix for advanced anti-HIV-1 drug delivery
Margaret Siyawamwaya et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
'Temporary Plasticiser': A novel solution to fabricate 3D printed patient-centred cardiovascular 'Polypill' architectures
Beatriz C. Pereira et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
Atheer Awad et al.
PHARMACEUTICS (2019)
Fixed-Dose and Fixed-Ratio Combination Therapies in Type 2 Diabetes
Robert Schlosser
CANADIAN JOURNAL OF DIABETES (2019)
Co-crystal of tramadol-celecoxib: preclinical and clinical evaluation of a novel analgesic
Neus Gascon et al.
EXPERT OPINION ON INVESTIGATIONAL DRUGS (2019)
Management of Hepatitis C in 2019
Kristen Marks et al.
JAMA-JOURNAL OF THE AMERICAN MEDICAL ASSOCIATION (2019)
3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
Pamela Robles-Martinez et al.
PHARMACEUTICS (2019)
Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Supersaturating drug delivery system of fixed drug combination: sulfamethoxazole and trimethoprim
Cassiana Mendes et al.
EXPERT REVIEW OF ANTI-INFECTIVE THERAPY (2019)
Synergistic Antibacterial Activity of Designed Trp-Containing Antibacterial Peptides in Combination With Antibiotics Against Multidrug-Resistant Staphylococcus epidermidis
Dejing Shang et al.
FRONTIERS IN MICROBIOLOGY (2019)
Embedded 3D Printing of Novel Bespoke Soft Dosage Form Concept for Pediatrics
Katarzyna Rycerz et al.
PHARMACEUTICS (2019)
Spray drying of pharmaceuticals and biopharmaceuticals: Critical parameters and experimental process optimization approaches
Ahmad Ziaee et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
On-demand manufacturing of immediate release levetiracetam tablets using pressure-assisted microsyringe printing
Ilias El Aita et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Hepatitis C virus therapy: No one will be left behind
Marc Bourliere et al.
INTERNATIONAL JOURNAL OF ANTIMICROBIAL AGENTS (2019)
Amorphous solid dispersion of ibuprofen: A comparative study on the effect of solution based techniques
Ahmad Ziaee et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Clinical relevance of in vitro synergistic activity of antibiotics for multidrug-resistant Gram-negative infections: A systematic review
Konstantinos Z. Vardakas et al.
JOURNAL OF GLOBAL ANTIMICROBIAL RESISTANCE (2019)
Fixed-dose combination antihypertensives and risk of medication errors
Frank Moriarty et al.
HEART (2019)
Visible light 3D printing with epoxidized vegetable oils
Diego Savio Branciforti et al.
ADDITIVE MANUFACTURING (2019)
A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery
Christos I. Gioumouxouzis et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
From 'fixed dose combinations' to 'a dynamic dose combiner': 3D printed bi-layer antihypertensive tablets
Muzna Sadia et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Optimising the in vitro and in vivo performance of oral cocrystal formulations via spray coating
Dolores R. Serrano et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2018)
A comparative study between hot-melt extrusion and spray-drying for the manufacture of anti-hypertension compatible monolithic fixed-dose combination products
J. F. Kelleher et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Production of cocrystals in an excipient matrix by spray drying
David Walsh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Use of chemometrics to compare NIR and HPLC for the simultaneous determination of drug levels in fixed-dose combination tablets employed in tuberculosis treatment
Kelly Sivocy Sampaio Teixeira et al.
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2018)
Improved Stability of Tuberculosis Drug Fixed-Dose Combination Using Isoniazid-Caffeic Acid and Vanillic Acid Cocrystal
Swapna Battini et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Orally Bioavailable and Effective Buparvaquone Lipid-Based Nanomedicines for Visceral Leishmaniasis
Lindsay Smith et al.
MOLECULAR PHARMACEUTICS (2018)
Synergistic combination of two antimicrobial agents closing each other's mutant selection windows to prevent antimicrobial resistance
Xuejie Xu et al.
SCIENTIFIC REPORTS (2018)
Programming of Multicomponent Temporal Release Profiles in 3D Printed Polypills via Core-Shell, Multilayer, and Gradient Concentration Profiles
Alexander P. Haring et al.
ADVANCED HEALTHCARE MATERIALS (2018)
3D-Printed Chips: Compatibility of Additive Manufacturing Photopolymeric Substrata with Biological Applications
Megan Carve et al.
MICROMACHINES (2018)
Drug-Drug and Drug-Nutraceutical Cocrystal/Salt as Alternative Medicine for Combination Therapy: A Crystal Engineering Approach
Ranjit Thakuria et al.
CRYSTALS (2018)
Engineering of pharmaceutical cocrystals in an excipient matrix: Spray drying versus hot melt extrusion
David Walsh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Patient acceptability of 3D printed medicines
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Anti-tuberculosis drug combination for controlled oral delivery using 3D printed compartmental dosage forms: From drug product design to in vivo testing
Natalja Genina et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Safety of a fixed-dose combination of artesunate and amodiaquine for the treatment of uncomplicated Plasmodium falciparum malaria in real-life conditions of use in Cote d'Ivoire
Serge-Brice Assi et al.
MALARIA JOURNAL (2017)
Development and characterization of a Drop-on-Demand inkjet printing system for nuclear target fabrication
R. Haas et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT (2017)
Thermogelling properties of purified poloxamer 407
Amir Fakhari et al.
HELIYON (2017)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Mohamed A. Alhnan et al.
PHARMACEUTICAL RESEARCH (2016)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of 5-drug polypill
Kinam Park
JOURNAL OF CONTROLLED RELEASE (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
Extensively drug-resistant tuberculosis in a young child after travel to India
Nicole Salazar-Austin et al.
LANCET INFECTIOUS DISEASES (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
Microstereolithography and characterization of poly(propylene fumarate)-based drug-loaded microneedle arrays
Yanfeng Lu et al.
BIOFABRICATION (2015)
Cocrystals of the Tuberculosis Drug Isoniazid: Polymorphism, Isostructurality, and Stability
Battini Swapna et al.
CRYSTAL GROWTH & DESIGN (2014)
Hot-melt co-extrusion for the production of fixed-dose combination products with a controlled release ethylcellulose matrix core
A. -K. Vynckier et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Review of bilayer tablet technology
Admassu Abebe et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Hot-melt co-extrusion: requirements, challenges and opportunities for pharmaceutical applications
An-Katrien Vynckier et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2014)
Ledipasvir and Sofosbuvir for Untreated HCV Genotype 1 Infection
Nezam Afdhal et al.
NEW ENGLAND JOURNAL OF MEDICINE (2014)
Formulation design, challenges, and development considerations for fixed dose combination (FDC) of oral solid dosage forms
Divyakant Desai et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2013)
Reducing the pill burden
Roger Collier
CANADIAN MEDICAL ASSOCIATION JOURNAL (2012)
Inkjet Printing of Drug Substances and Use of Porous Substrates-Towards Individualized Dosing
Niklas Sandler et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2011)
Treatment of Hepatitis C Virus Infection With Interferon and Small Molecule Direct Antivirals: Viral Kinetics and Modeling
Libin Rong et al.
CRITICAL REVIEWS IN IMMUNOLOGY (2010)
Toxicological evaluation of benzophenone Scientific Opinion of the Panel on food contact materials, enzymes, flavourings and processing aids (CEF)
Arturo Anadon et al.
EFSA JOURNAL (2009)
Fixed dose drug combinations (FDCs): rational or irrational: a view point
Chandler S. Gautam et al.
BRITISH JOURNAL OF CLINICAL PHARMACOLOGY (2008)
Formulation and in vitro studies of a fixed-dose combination of a bilayer matrix tablet containing metformin HCl as sustained release and glipizide as immediate release
Uttam Mandal et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2008)
Coprocessing of nevirapine and stavudine by spray drying
G. A. Mohammed et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2008)
Access denied? The status of co-receptor inhibition to counter HIV entry
Priscilla Biswas et al.
EXPERT OPINION ON PHARMACOTHERAPY (2007)
Treating viral hepatitis C: Efficacy, side effects, and complications
M. P. Manns et al.
GUT (2006)
Formulation and processing of novel conductive solution inks in continuous inkjet printing of 3-D electric circuits
JF Mei et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2005)
Binding mechanisms in selective laser sintering and selective laser melting
JP Kruth et al.
RAPID PROTOTYPING JOURNAL (2005)
Application and possibilities of supercritical CO2 extraction in food processing industry:: An overview
M Raventós et al.
FOOD SCIENCE AND TECHNOLOGY INTERNATIONAL (2002)
分享论文
