期刊
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
卷 148, 期 -, 页码 -出版社
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.jpcs.2020.109686
关键词
Tungsten alloys; Ball milling; Nanostructure
资金
- European Union's Horizon 2020 research and innovation programme [713514]
- EPSRC [EP/R041768/1]
- EPSRC [EP/R041768/1] Funding Source: UKRI
Nanocrystalline W-Al alloys with Al content up to 20 at.% were produced via high energy ball milling. The alloys exhibited decreased crystallite size and improved sinterability after 70-100 hours of mechanical treatment. The addition of Al also enhanced coarsening resistance in the alloys.
In this work, nanocrystalline W-Al alloys (up to 20 at.% of Al) were produced by high energy ball milling and powder microstructural evolution was investigated as a function of milling time. It was found that, regardless of the composition, alloys crystallite size progressively decreases and stabilizes around a value of about 10-15 nm after 70-100 h of mechanical treatment. The aluminum dissolution into the bcc W lattice was confirmed by DSC, SEM, and TEM. The formation of intermetallic compounds was detected neither during ball milling nor after thermal treatments up to 1450 degrees C. Sintering behavior of mechanically alloyed W-Al alloys was tested under pressureless conditions, and a significant improvement in terms of sinterability with respect to pure W was observed. Along with favoring the sintering process, the addition of Al also resulted in a notable enhancement of the coarsening resistance. Indeed, the analysis of ball-milled pure tungsten after thermal treatment at 1450 degrees C provided an estimated average crystallite size of about 2 mu m, while W80Al20 and W90Al10 alloys retained an average crystallite size of about 70 nm and 60 nm, respectively. Although further work is required to optimize sintering conditions for achieving full density samples, the retaining of the nanostructure marks a significant advancement in the field of W-based alloys.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据