期刊
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
卷 281, 期 -, 页码 -出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.jmatprotec.2020.116624
关键词
Dual-spot laser; Welding-brazing; Energy ratio; Al/steel butt joint; IMC; Tensile properties
资金
- National Natural Science Foundation of China [51504074]
- National Key Research and Development Program of China [2018YFB1107900]
- Key Research & Development Program in Shandong Province [2017GGX30147, 2017CXGC0811]
- Fundamental Research Funds for the Central Universities [HIT.NSRIF.2017003]
Al/steel butt joints were successfully obtained using a dual-spot laser welding-brazing process with different R (R = E-Fe:E-Al = 4:6, 5:5, and 6:4; E-Fe and E-Al represented the energy ratios of the laser near steel and Al, respectively). The molten filler metals wet and spread well along the front and back surfaces of the steel when R was 5:5 and 6:4, whereas an undercut occurred when R was 4:6. The interfacial intermetallic compound (IMC) along the brazing interface consisted of only thin-layered tau(5)-Fe1.8Al7.2Si when R was 5:5 and 4:6. The IMC had a greater thickness when R was 5:5 owing to its higher peak temperatures than when R was 4:6. A mixed IMC (theta-Fe(Al,Si)(3)+tau(5)-Fe1.8Al7.2Si) was newly formed in the top region of the brazing interface when R was 6:4. TEM observations revealed that two types of grains existed in theta-Fe(Al,Si)(3): normal and twinned. Numerical simulations for the thermal cycles along the brazing interface indicated that the IMC thickness was determined by the interfacial peak temperature, while the IMC homogeneity was determined by the temperature gradient. The results of an experiment involving the tensile properties indicated that the highest average joint strength (193 MPa) and largest average fracture displacement (0.64 mm) when R was 5:5, owing to its satisfactory weld formation and reasonable IMC distribution.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据