相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Integrating the setup planning with fixture design practice by concurrent consideration of machining and fixture design principles
D. Manafi et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)
A general framework of workpiece setup optimization for the five-axis machining
Song Gao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)
A tool path generation method based on smooth machine rotary angle and tilt angle in five-axis surface machining with torus cutters
Yu Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
The International Journal of Production Research at 55: a content-driven review and analysis
Jian (Jeff) Guan et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Tool path generation for five-axis machining of blisks with barrel cutters
Yaoan A. Lu et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Knowledge-based expert system in manufacturing planning: state-of-the-art review
S. P. Leo Kumar
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Combining physical shell mapping and reverse-compensation optimisation for spiral machining of free-form surfaces
Xiongbing Li et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
A Gouge-Free Tool Axis Reorientation Method for Kinematics Compliant Avoidance of Singularity in 5-Axis Machining
Shuoxue Sun et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Inverse kinematics of a 5-axis hybrid robot with non-singular tool path generation
Qi Liu et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)
Stability prediction of five-axis ball-end finishing milling by considering multiple interaction effects between the tool and workpiece
Yongjian Ji et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Tool orientations' generation and nonlinear error control based on complex surface meshing
Xinyu Hong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Research on detection of the linkage performance for five-axis CNC machine tools based on RTCP trajectories combination
Zhong Jiang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Globally optimal tool paths for sculptured surfaces with emphasis to machining error and cutting posture smoothness
Nikolaos A. Fountas et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)
Generation of Tool-Life-Prolonging and Chatter-Free Efficient Toolpath for Five-Axis Milling of Freeform Surfaces
Jiarui Wang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Post-processor development for a turning and milling composite machine tool
Qing-Chun Tang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Automatic generation of globally assured collision free orientations for 5-axis ball-end tool-paths
Ben Ezair et al.
COMPUTER-AIDED DESIGN (2018)
Constrained Trajectory Generation and Control for a 9-Axis Micromachining Center With Four Redundant Axes
Alexander Yuen et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2018)
An efficient multipoint 5-axis tool positioning method for tensor product surfaces
Ravinder Kumar Duvedi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Singularity avoidance for five-axis machine tools through introducing geometrical constraints
Min Wan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Tool Orientation Planning in Milling With Process Dynamic Constraints: A Minimax Optimization Approach
Tao Huang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
A multi-objective tool-axis optimization algorithm based on covariant field functional
Changya Yan et al.
JOURNAL OF MANUFACTURING SYSTEMS (2018)
Smooth fillet-end cutter tool path generation method on triangular-mesh surface based on Modified Butterfly subdivision
Qirui Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Smoothing Rotary Axes Movements for Ball-End Milling Based on the Gradient-Based Differential Evolution Method
Yao-An Lu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Stability Prediction Based Effect Analysis of Tool Orientation on Machining Efficiency for Five-Axis Bull-Nose End Milling
Xiaowei Tang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
A feedrate scheduling algorithm to constrain tool tip position and tool orientation errors of five-axis CNC machining under cutting load disturbances
Jixiang Yang et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2018)
Tool orientation optimization for 5-axis machining with C-space method
Zhenpeng Mi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Constructing smooth tool orientation field based on radial basis function for 5-axis machining
Kun-Tao Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Tool path generation via the multi-criteria optimisation for flat-end milling of sculptured surfaces
YaoAn Lu et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
A tool orientation smoothing method based on machine rotary axes for five-axis machining with ball end cutters
Rufeng Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Tool orientation sequence smoothing method based on the discrete domain of feasible orientations
Qirui Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Singularities in five-axis machining: Cause, effect and avoidance
R. J. Cripps et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Dynamics and Stability Prediction of Five-Axis Flat-End Milling
YaoAn Lu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Cutting force and machine kinematics constrained cutter location planning for five-axis flank milling of ruled surfaces
Ke Xu et al.
JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2017)
Tool orientation optimization for reduction of vibration and deformation in ball-end milling of thin-walled impeller blades
Tao Huang et al.
16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO) (2017)
Efficiency-optimal iso-planar tool path generation for five-axis finishing machining of freeform surfaces
Pengcheng Hu et al.
COMPUTER-AIDED DESIGN (2017)
Optimal cutter orientation for five-axis machining based on mechanical equilibrium theory
Zhiwang Gan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
The edge-torus tangency problem in multipoint machining of triangulated surface models
Ravinder Kumar Duvedi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Simultaneous optimization of the feed direction and tool orientation in five-axis flat-end milling
YaoAn Lu et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)
Process simulation integrated tool axis selection for 5-axis tool path generation
Lutfi Taner Tunc et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Tool orientation optimization for 3+2-axis CNC machining of sculptured surface
Zhu Yu et al.
COMPUTER-AIDED DESIGN (2016)
Direct 5-axis tool posture local collision-free area generation for point clouds
Wei Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Single spherical angle linear interpolation for the control of non-linearity errors in five-axis flank milling
Kai Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Accessible regions of tool orientations in multi-axis milling of blisks with a ball-end mill
Yongshou Liang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Improving machined surface texture in avoiding five-axis singularity with the acceptable-texture orientation region concept
Zhiwei Lin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Chatter free tool orientations in 5-axis ball-end milling
Sun Chao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
New algorithm to minimise kinematic tool path errors around 5-axis machining singular points
Chu A. My et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)
A tool path patching strategy around singular point in 5-axis ball-end milling
Laureen Grandguillaume et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)
Smooth Tool Path Optimization for Flank Milling Based on the Gradient-Based Differential Evolution Method
YaoAn Lu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Chatter-free cutter postures in five-axis machining
Sibao Wang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Influence of tool inclination angle and cutting direction on long thin-walled part's dimensional and geometric accuracy when high-speed ball end milling the heat-treated titanium alloy Ti-6Al-4V
Sarwar Ali Abbasi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2016)
Tool path generation method for five-axis flank milling of corner by considering dynamic characteristics of machine tool
Wenyao Shao et al.
9TH INTERNATIONAL CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGY - INTELLIGENT MANUFACTURING IN THE KNOWLEDGE ECONOMY ERA (2016)
Analysis of tool orientation for 5-axis ball-end milling of flexible parts
S. Ehsan Layegh K et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Research on inverse evaluation mechanism in toolpath generation based on global interpolation simulation
Yangfan Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Improving machined surface textures in avoiding five-axis singularities considering tool orientation angle changes
Zhiwei Lin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Local toolpath smoothing for five-axis machine tools
Sneha Tulsyan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Dual-Bezier path smoothing and interpolation for five-axis linear tool path in workpiece coordinate system
Yongqiao Jin et al.
ADVANCES IN MECHANICAL ENGINEERING (2015)
Rolling ball method applied to 31/21/2-axis machining for tool orientation and positioning and path planning
Armando Roman et al.
ADVANCES IN MECHANICAL ENGINEERING (2015)
Five-axis trajectory generation based on kinematic constraints and optimisation
Hongyao Shen et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2015)
Optimisation of five-axis machining G-codes in the angular space
Gun Srijuntongsiri et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2015)
Iso-scallop tool-path generation of five-axis computer numerically controlled machining for cyclide splines
Cheng Min et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Collision-free tool orientation optimization in five-axis machining of bladed disk
Li Chen et al.
JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2015)
Inverse kinematics for optimal tool orientation control in 5-axis CNC machining
Rida T. Farouki et al.
COMPUTER AIDED GEOMETRIC DESIGN (2014)
A multipoint method for 5-axis machining of triangulated surface models
Ravinder Kumar Duvedi et al.
COMPUTER-AIDED DESIGN (2014)
Algorithms for collision detection and avoidance for five-axis NC machining: A state of the art review
Tran Duc Tang
COMPUTER-AIDED DESIGN (2014)
Flat-end cutter orientation on a quadric in five-axis machining
Jianhua Fan et al.
COMPUTER-AIDED DESIGN (2014)
Error prediction and compensation based on interference-free tool paths in blade milling
Ming-Hai Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Optimising tool positioning for achieving multi-point contact based on symmetrical error distribution curve in sculptured surface machining
Ying He et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Non-singular tool path planning by translating tool orientations in C-space
Zhiwei Lin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Graph-based optimization of five-axis machine tool movements by varying tool orientation
Denys Plakhotnik et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Manufacturing and measurement of freeform optics
F. Z. Fang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Optimal tool orientation control for 5-axis CNC milling with ball-end cutters
Rida T. Farouki et al.
COMPUTER AIDED GEOMETRIC DESIGN (2013)
5-axis flank milling: A state-of-the-art review
Ramy F. Harik et al.
COMPUTER-AIDED DESIGN (2013)
Torus cutter positioning in five-axis milling using balance of the transversal cutting force
Patrick Gilles et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Using rotary contact method for 5-axis convex sculptured surfaces machining
Wengang Fan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Generalized kinematics of five-axis serial machines with non-singular tool path generation
Jixiang Yang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Improved Rotary Contact Method for 5-Axis Sculptured Surfaces Machining
Wengang Fan et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
The avoidance of cutter gouging in five-axis machining with a fillet-end milling cutter
Juan Du et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Constant scallop-height tool path generation for three-axis discrete data points machining
Wei Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Rotary Contact Method for 5-Axis Tool Positioning
Wengang Fan et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)
Smooth tool path generation for five-axis flank milling using multi-objective programming
G. Zheng et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Improving the dynamics of five-axis machining through optimization of workpiece setup and tool orientations
Pengcheng Hu et al.
COMPUTER-AIDED DESIGN (2011)
Generating tool-path with smooth posture change for five-axis sculptured surface machining based on cutter's accessibility map
L. L. Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
5-Axis tool path smoothing based on drive constraints
Xavier Beudaert et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Integrated method for tool path generation in five-axis sculptured surface machining
Jianhua Fan et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2011)
New criteria for tool orientation determination in five-axis sculptured surface machining
M. Javad Barakchi Fard et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2011)
Optimization of tool positions locally based on the BCELTP for 5-axis machining of free-form surfaces
Hu Gong et al.
COMPUTER-AIDED DESIGN (2010)
Recent development in CNC machining of freeform surfaces: A state-of-the-art review
Ali Lasemi et al.
COMPUTER-AIDED DESIGN (2010)
Adaptable geometric patterns for five-axis machining: a survey
Stanislav S. Makhanov
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
A GPU-based algorithm for generating collision-free and orientation-smooth five-axis finishing tool paths of a ball-end cutter
Qing-Zhen Bi et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2010)
Effective Determination of Feed Direction and Tool Orientation in Five-Axis Flat-End Milling
M. Javad Barakchi Fard et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
Tool Orientation Optimization Considering Second Order Kinematical Performance of the Multi-Axis Machine
Tao Ye et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
Modeling and simulation of 5-axis milling processes
E. Budak et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Effect of tool tilt angle on machining strip width in five-axis flat-end milling of free-form surfaces
M. Javad Barakchi Fard et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Geometrical deviations versus smoothness in 5-axis high-speed flank milling
Pierre-Yves Pechard et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Investigation of lead and tilt angle effects in 5-axis ball-end milling processes
Erdem Ozturk et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
A new accurate curvature matching and optimal tool based five-axis machining algorithm
Than Lin et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2009)
Second order approximation of tool envelope surface for 5-axis machining with single point contact
Hu Gong et al.
COMPUTER-AIDED DESIGN (2008)
Geometric parameter optimization in multi-axis machining
Tao Ye et al.
COMPUTER-AIDED DESIGN (2008)
Five-axis tool path generation for a flat-end tool based on iso-conic partitioning
Nan Wang et al.
COMPUTER-AIDED DESIGN (2008)
The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation
C. Castagnetti et al.
COMPUTER-AIDED DESIGN (2008)
A three-dimensional configuration-space method for 5-axis tessellated surface machining
J. Lu et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2008)
Quadric method for cutter orientation in five-axis sculptured surface machining
Jianhua Fan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
The sweep plane algorithm for global collision detection with workpiece geometry update for five-axis NC machining
T. D. Tang et al.
COMPUTER-AIDED DESIGN (2007)
Optimal sequencing of rotation angles for five-axis machining
S. S. Makhanov et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Automatic generation of gouge-free and angular-velocity-compliant five-axis toolpath
Nan Wang et al.
COMPUTER-AIDED DESIGN (2007)
Penetration-elimination method for five-axis CNC machining of sculptured surfaces
Y. Hosseinkhani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Gouging elimination through tool lifting in tool path generation for five-axis milling based on faceted models
G. Kiswanto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Inverse kinematics of five-axis machines near singular configurations
Knut Sorby
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Graphics-assisted cutter orientation correction for collision-free five-axis machining
Q.-H. Wang et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2007)
A 3D curvature gouge detection and elimination method for 5-axis CNC milling of curved surfaces
Yin J. Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Arc-intersect method for 3(1)/(1)(2)/(2)-axis tool paths on a 5-axis machine
Paul J. Gray et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
A global cutter positioning method for multi-axis machining of sculptured surfaces
Zhiqiang Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Cutter selection for 5-axis milling of sculptured surfaces based on accessibility analysis
L. L. Li et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2006)
Tool path planning for five-axis flank milling with developable surface approximation
Chih-Hsing Chu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Graphics-assisted approach to rapid collision detection for multi-axis machining
Qing-Hui Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Optimal tool orientation for five-axis tool-end machining by swept envelope approach
JCJ Chiou et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2005)
Interference-free tool path generation for 5-axis sculptured surface machining using rational Bezier motions of a flat-end cutter
W Zhang et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2005)
Continuous path verification in multi-axis NC-machining
R Wein et al.
INTERNATIONAL JOURNAL OF COMPUTATIONAL GEOMETRY & APPLICATIONS (2005)
Precise global collision detection in multi-axis NC-machining
O Ilushin et al.
COMPUTER-AIDED DESIGN (2005)
Arc-intersect method for 5-axis tool positioning
PJ Gray et al.
COMPUTER-AIDED DESIGN (2005)
Tool path generation for five-axis NC machining using adaptive space-filling curves
W Anotaipaiboon et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2005)
Local interference detection and avoidance in five-axis NC machining of sculptured surfaces
T Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2005)
Triple tangent flank milling of ruled surfaces
C Menzel et al.
COMPUTER-AIDED DESIGN (2004)
Avoiding 5-axis singularities using tool path deformation
A Affouard et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Efficient five-axis machining of free-form surfaces with constant scallop height tool paths
H Li et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2004)
Determining a collision-free domain for the tool in five-axis machining
F Monies et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2004)
Oriented bounding box and octree based global interference detection in 5-axis machining of free-form surfaces
S Ding et al.
COMPUTER-AIDED DESIGN (2004)
Graphics-assisted Rolling Ball Method for 5-axis surface machining
PJ Gray et al.
COMPUTER-AIDED DESIGN (2004)
Optimization of rotations of a five-axis milling machine near stationary points
M Munlin et al.
COMPUTER-AIDED DESIGN (2004)
Five-axis tool orientation smoothing using quaternion interpolation algorithm
MC Ho et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Tool tip gouging avoidance and optimal tool positioning for 5-axis sculptured surface machining
JH Yoon
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2003)
Optimizing tool orientations for 5-axis machining by configuration-space search method
CS Jun et al.
COMPUTER-AIDED DESIGN (2003)
Optimal and collision free tool posture in five-axis machining through the tight integration of tool path generation and machine simulation
B Lauwers et al.
COMPUTER-AIDED DESIGN (2003)
Collision-free finishing toolpaths from visibility data
M Balasubramaniam et al.
COMPUTER-AIDED DESIGN (2003)
Rolling ball method for 5-axis surface machining
P Gray et al.
COMPUTER-AIDED DESIGN (2003)
Flank milling with flat end milling cutters
S Bedi et al.
COMPUTER-AIDED DESIGN (2003)
Locally optimal cutting positions for 5-axis sculptured surface machining
JH Yoon et al.
COMPUTER-AIDED DESIGN (2003)
Development of a five-axis milling tool path generation algorithm based on faceted models
B Lauwers et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
An integrated machining approach for a centrifugal impeller
HT Young et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)
Tool-path generation for five-axis machining of free-form surfaces based on accessibility analysis
XJ Xu et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2002)
On the tool-path optimization of a milling robot
SS Makhanov et al.
COMPUTERS & INDUSTRIAL ENGINEERING (2002)
A combined 3D linear and circular interpolation technique for multi-axis CNC machining
H Liang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2002)
A machining potential field approach to tool path generation for multi-axis sculptured surface machining
CJ Chiou et al.
COMPUTER-AIDED DESIGN (2002)
Global tool interference detection in five-axis machining of sculptured surfaces
YL Cai et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2002)
Determining the optimum process mean for a poor process
CH Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2002)
Tool selection for five-axis curvature matched machining
CG Jensen et al.
COMPUTER-AIDED DESIGN (2002)
Real-time interference analysis between a tool and an environment
S Ho et al.
COMPUTER-AIDED DESIGN (2001)
Isophote-based ruled surface approximation of free-form surfaces and its application in NC machining
ZL Han et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2001)
Selection of the machining inclination angle in high-speed ball end milling
TJ Ko et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2001)
Adaptive nonlinear tool path optimization for five-axis machining
E Bohez et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2000)
On local gouging in five-axis sculptured surface machining using flat-end tools
A Rao et al.
COMPUTER-AIDED DESIGN (2000)
Generating 5-axis NC roughing paths directly from a tessellated representation
M Balasubramaniam et al.
COMPUTER-AIDED DESIGN (2000)
Comparison between multi-point and other 5-axis tool positioning strategies
A Warkentin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2000)
Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces
A Warkentin et al.
COMPUTER AIDED GEOMETRIC DESIGN (2000)
分享论文
