相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Optimization of a high-pressure microwave curing process for T800/X850 carbon fiber-reinforced plastic
Chenglong Guan et al.
HIGH PERFORMANCE POLYMERS (2020)
Superhydrophobicity of polyvinylidene fluoride induced by integrating liquid-exfoliated hexagonal boron nitride nanosheets
Lulu An et al.
HIGH PERFORMANCE POLYMERS (2020)
Flexible polyurethane/boron nitride composites with enhanced thermal conductivity
Ting Fei et al.
HIGH PERFORMANCE POLYMERS (2020)
An efficient approach for constructing 3-D boron nitride networks with epoxy composites to form materials with enhanced thermal, dielectric, and mechanical properties
XinYu Leng et al.
HIGH PERFORMANCE POLYMERS (2019)
Preparation and performances of novel polyphosphazene-based thermally conductive composites
Wenqi Zou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Role of micro and nano-particles of hBN as a secondary solid lubricant for improving tribo-potential of PAEK composite
Jitendra Narayan Panda et al.
TRIBOLOGY INTERNATIONAL (2019)
Effects of the addition of boron nitride nanoplate on the fracture toughness, flexural strength, and Weibull Distribution of hydroxyapatite composites prepared by spark plasma sintering
Trevor G. Aguirre et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
The effect of hexagonal boron nitride on wear resistance under two and three-body abrasion modes of polyetherketone composites
G. Hemanth et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2019)
Effect of reactive and non-reactive diluents on thermal and mechanical properties of epoxy resin
Animesh Sinha et al.
HIGH PERFORMANCE POLYMERS (2018)
Anisotropic thermally conductive flexible polymer composites filled with hexagonal born nitride (h-BN) platelets and ammine carbon nanotubes (CNT-NH2): Effects of the filler distribution and orientation
Zheng Su et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Synergistic enhancement of anisotropic thermal transport flexible polymer composites filled with multi-layer graphene (mG) and mussel-inspiring modified hexagonal boron nitride (h-BN)
Zheng Su et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Fabrication, proposed model and simulation predictions on thermally conductive hybrid cyanate ester composites with boron nitride fillers
Yang Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Enhanced thermal conductivity and mechanical property through boron nitride hot string in polyvinylidene fluoride fibers by electrospinning
Dong-Li Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Tribological characteristics of boron nitride nanosheets on silicon wafers obtained by the reaction of MgB2 and NH3
E. Songfeng et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Enhanced thermal conductivity and mechanical property of flexible poly (vinylidene fluoride)/boron nitride/graphite nanoplatelets insulation films with high breakdown strength and reliability
Qingsong Song et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Enhancement in thermal conductivity and mechanical properties via large-scale fabrication of boron nitride nanosheets
Shengzhao Li et al.
HIGH PERFORMANCE POLYMERS (2017)
Epoxy matrix toughness improvement via reactive bio-resin alloying
S. Mohajeri et al.
HIGH PERFORMANCE POLYMERS (2017)
Enhancement of tribological performance of epoxy bulk composites and composite coatings using micro/nano fillers: a review
Satheesan Bobby et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Comparative study on tribological mechanisms of polyimide composites when sliding against medium carbon steel and NiCrBSi
Huimin Qi et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)
Recommendations for h-BN loading and service temperature to achieve low friction coefficient and wear rate for thermal-sprayed PEEK coatings
J. Tharajak et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Non-covalent functionalized hexagonal boron nitride nanoplatelets to improve corrosion and wear resistance of epoxy coatings
Mingjun Cui et al.
RSC ADVANCES (2017)
Attaining high tribo-performance of PAEK composites by selecting right combination of solid lubricants in right proportions
Jitendra Narayan Panda et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Evaluating vibration assisted vacuum infusion processing of hexagonal boron nitride sheet modified carbon fabric/epoxy composites in terms of interlaminar shear strength and void content
Reinhold Meier et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Impact of counterpart materials and nanoparticles on the transfer film structures of polyimide composites
Huimin Qi et al.
MATERIALS & DESIGN (2016)
Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplateletsat the fiber-matrix interphase
Wenzhen Qin et al.
COMPOSITES PART B-ENGINEERING (2015)
Physico-mechanical and tribological properties of Cu/h-BN nanocomposites synthesized by PM route
Omayma A. M. Elkady et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Morphological and physical properties and friction/wear behavior of h-BN filled PEEK composite coatings
Jirasak Tharajak et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Effect of resins on thermal, mechanical and tribological properties of friction materials
Peng Cai et al.
TRIBOLOGY INTERNATIONAL (2015)
Influence of micro/nanofiller alumina on the mechanical behavior of novel hybrid epoxy nanocomposites
Gujjala Raghavendra et al.
HIGH PERFORMANCE POLYMERS (2015)
Thermal and mechanical properties of epoxy composites with a binary particle filler system consisting of aggregated and whisker type boron nitride particles
Kiho Kim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Effect of mixing parameters on the mechanical and thermal properties of a nanoclay-modified epoxy resin
M. Bakar et al.
HIGH PERFORMANCE POLYMERS (2014)
Applications of dry film lubricants for polymer gears
K. D. Dearn et al.
WEAR (2013)
Surface lubrication of graphite fabric reinforced epoxy composites with nano- and micro-sized hexagonal boron nitride
Ajay Kumar Kadiyala et al.
WEAR (2013)
Role of micro/nano fillers on mechanical and tribological properties of polyamide66/polypropylene composites
B. Suresha et al.
MATERIALS & DESIGN (2010)
Surface technology for automotive engineering
K. Bewilogua et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Effect of particulate fillers on mechanical and abrasive wear behaviour of polyamide 66/polypropylene nanocomposites
B. N. Ravi Kumar et al.
MATERIALS & DESIGN (2009)
A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles-An additive in porous sliding bearings for a car clutch
Z. Pawlak et al.
WEAR (2009)
Friction and wear behavior of laser cladding Ni/hBN self-lubricating composite coating
Shitang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Fabrication and characterization of TiO2-epoxy nanocomposite
Amit Chatterjee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Mechanical and tribological properties of phenolic resin-based friction composites filled with several inorganic fillers
Gewen Yi et al.
WEAR (2007)
Dynamic mechanical analysis of carbon/epoxy composites for structural pipeline repair
W. K. Goertzen et al.
COMPOSITES PART B-ENGINEERING (2007)
High-temperature strength and storage modulus in unidirectional hybrid composites
E. J. Bosze et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Effect of hexagonal boron nitride and calcined petroleum coke on friction and wear behavior of phenolic resin-based friction composites
Gewen Yi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Friction and wear characteristics of carbon-epoxy and glass-epoxy woven roving fiber composites
B. Suresha et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
PEEK composites reinforced by nano-sized SiO2 and Al2O3 particulates
MC Kuo et al.
MATERIALS CHEMISTRY AND PHYSICS (2005)
Fabrication and mechanical characterization of carbon/SiC-epoxy nanocomposites
N Chisholm et al.
COMPOSITE STRUCTURES (2005)
Two-body and three-body abrasive wear behaviour of polyaryletherketone composites
AP Harsha et al.
POLYMER TESTING (2003)
Three-body abrasive wear behaviour of polyaryletherketone composites
AP Harsha et al.
WEAR (2003)
Impact and wear resistance of polymer nanocomposites at low filler content
B Wetzel et al.
POLYMER ENGINEERING AND SCIENCE (2002)
Influence of solid lubricants and fibre reinforcement on wear behaviour of polyethersulphone
J Bijwe et al.
TRIBOLOGY INTERNATIONAL (2000)
Three-body abrasive wear of short glass fibre polyester composite
N Chand et al.
WEAR (2000)