相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。3D printing for membrane separation, desalination and water treatment
Leonard D. Tijing et al.
APPLIED MATERIALS TODAY (2020)
Naturally biomimicked smart shape memory hydrogels for biomedical functions
Jay M. Korde et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Progressive trends in heavy metal ions and dyes adsorption using silk fibroin composites
Shivani Rastogi et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)
Silk fibres exhibiting biodegradability & superhydrophobicity for recovery of petroleum oils from oily wastewater
Prakash M. Gore et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Nanocluster materials in photosynthetic machines
Akash Gautam et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Engineered Smart Textiles and Janus Microparticles for Diverse Functional Industrial Applications
Shubham Saini et al.
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2019)
Polymer Fuel Cell Based on Polybenzimidazole Membrane: A Review
Ajmal Kalathil et al.
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2019)
Progress in silk materials for integrated water treatments: Fabrication, modification and applications
Prakash M. Gore et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Selective ion removal and antibacterial activity of silver-doped multi-walled carbon nanotube/polyphenylsulfone nanocomposite membranes
Arun Kumar Shukla et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
3D Printed Fouling-Resistant Composite Membranes
Saeed Mazinani et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Prasansha Rastogi et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Prasansha Rastogi et al.
BIOFABRICATION (2019)
3D printing and surface imprinting technologies for water treatment: A review
Hammed Abiodun Balogun et al.
JOURNAL OF WATER PROCESS ENGINEERING (2019)
Exploration of elastomeric and polymeric liquid crystals with photothermal actuation: A review
Prasansha Rastogi et al.
EUROPEAN POLYMER JOURNAL (2019)
Fused deposition processing polycaprolactone of composites for biomedical applications
Arya Prasad et al.
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2019)
Structure architecture of micro/nanoscale ZIF-L on a 3D printed membrane for a superhydrophobic and underwater superoleophobic surface
Shushan Yuan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Ion-imprinted nanofibers of PVDF/1-butyl-3-methylimidazolium tetrafluoroborate for dynamic recovery of europium (III) ions from mimicked effluent
Aditya Rajhans et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)
A comprehensive review of recent developments in 3D printing technique for ceramic membrane fabrication for water purification
Hitesh Dommati et al.
RSC ADVANCES (2019)
Ion-imprinted electrospun nanofibers of chitosan/1-butyl-3-methylimidazolium tetrafluoroborate for the dynamic expulsion of thorium (IV) ions from mimicked effluents
Prakash Macchindra Gore et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)
Biomimetic Design of Artificial Materials Inspired by Iridescent Nacre Structure and Its Growth Mechanism
Navneet Mishra et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)
Review on Three-Dimensionally Emulated Fiber-Embedded Lactic Acid Polymer Composites: Opportunities in Engineering Sector
Nikit Deoray et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)
Three-dimensionally printed bioinspired superhydrophobic PLA membrane for oil-water separation
Ruizhe Xing et al.
AICHE JOURNAL (2018)
Efficient dye adsorption by highly porous nanofiber aerogels
Sara Mousavi et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Nanofibers of resorcinol-formaldehyde for effective adsorption of As (III) ions from mimicked effluents
Prakash Gore et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)
Flexible Polymeric Substrates for Electronic Applications
Ankit Malik et al.
POLYMER REVIEWS (2018)
Bionic Prototyping of Honeycomb Patterned Polymer Composite and Its Engineering Application
Jay M. Korde et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)
Selective laser melting of high-performance pure tungsten: parameter design, densification behavior and mechanical properties
Chaolin Tan et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2018)
Heterogeneous wettable cotton based superhydrophobic Janus biofabric engineered with PLA/functionalized-organoclay microfibers for efficient oil-water separation
Prakash M. Gore et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Removal of heavy metal ions using a carboxylated graphene oxide-incorporated polyphenylsulfone nanofiltration membrane
Arun Kumar Shukla et al.
ENVIRONMENTAL SCIENCE-WATER RESEARCH & TECHNOLOGY (2018)
Biomimicking of Hierarchal Molluscan Shell Structure Via Layer by Layer 3D Printing
Ramdayal Yadav et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
3D printed polyamide membranes for desalination
Maqsud R. Chowdhury et al.
SCIENCE (2018)
Integration and fabrication of the cheap ceramic membrane through 3D printing technology
Lim Chin Hwa et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Ink-Jet Printing-Assisted Modification on Polyethersulfone Membranes Using a UV-Reactive Antimicrobial Peptide for Fouling-Resistant Surfaces
Gunasekaran Mohanraj et al.
ACS OMEGA (2018)
Review on 3D Prototyping of Damage Tolerant Interdigitating Brick Arrays of Nacre
Ramdayal Yadav et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Production of polyamide-12 membranes for microfiltration through selective laser sintering
Shushan Yuan et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
Ze-Xian Low et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Material jetting additive manufacturing: An experimental study using designed metrological benchmarks
Yee Ling Yap et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Super-hydrophobic 3D printed polysulfone membranes with a switchable wettability by self-assembled candle soot for efficient gravity-driven oil/water separation
Shushan Yuan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
3D printing of a mechanically durable superhydrophobic porous membrane for oil-water separation
Juan Lv et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
3D Printing and Bioprinting in MEMS Technology
Chee Kai Chua et al.
MICROMACHINES (2017)
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Adilet Zhakeyev et al.
ADVANCED SCIENCE (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
Directional Fluid Gating by Janus Membranes with Heterogeneous Wetting Properties for Selective Oil-Water Separation
Prashant Gupta et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Fundamentals and applications of 3D printing for novel materials
Jian-Yuan Lee et al.
APPLIED MATERIALS TODAY (2017)
Influence of meso-structure and chemical composition on FDM 3D-printed parts
Gianluca Alaimo et al.
COMPOSITES PART B-ENGINEERING (2017)
Adsorption of arsenic (V) ions onto cellulosic-ferric oxide system: kinetics and isotherm studies
Surabhi Sharma et al.
DESALINATION AND WATER TREATMENT (2016)
Additive manufacturing methods and modelling approaches: a critical review
H. Bikas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures
Garrett W. Melenka et al.
COMPOSITE STRUCTURES (2016)
Bioactive Hybrid Composite Membrane with Enhanced Antimicrobial Properties for Biomedical Applications
Abin Davis et al.
DEFENCE SCIENCE JOURNAL (2016)
The potential to enhance membrane module design with 3D printing technology
Jian-Yuan Lee et al.
JOURNAL OF MEMBRANE SCIENCE (2016)
A critical review on recent polymeric and nano-enhanced membranes for reverse osmosis
Adewale Giwa et al.
RSC ADVANCES (2016)
3D-printed microfluidic devices
Reza Amin et al.
BIOFABRICATION (2016)
An effective analytical model of selective laser melting
C. Y. Yap et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Geometry dependence of microstructure and microhardness for selective electron beam-melted Ti-6Al-4V parts
Y. H. Kok et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Bionic creation of nano-engineered Janus fabric for selective oil/organic solvent absorption
Prakash M. Gore et al.
RSC ADVANCES (2016)
Recent Advances in Membrane Based Waste Water Treatment Technology: A Review
Prashant Gupta et al.
ENERGY AND ENVIRONMENT FOCUS (2016)
Multifunctional nano-engineered and bio-mimicking smart superhydrophobic reticulated ABS/fumed silica composite thin films with heat-sinking applications
Prakash M. Gore et al.
RSC ADVANCES (2016)
Molecular simulation of geometrically optimized polyoxymethylene/poly (vinylalcohol) gel membrane for electroless scrubbing Ni(II) ions
Mrunalini Khanale et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2016)
Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer
Nima Afshar-Mohajer et al.
BUILDING AND ENVIRONMENT (2015)
Ink-jet printing assisted fabrication of patterned thin film composite membranes
Shai Badalov et al.
JOURNAL OF MEMBRANE SCIENCE (2015)
Proper accounting of mass transfer resistances in forward osmosis: Improving the accuracy of model predictions of structural parameter
Nhu-Ngoc Bui et al.
JOURNAL OF MEMBRANE SCIENCE (2015)
Poly(arylene sulfide sulfone) Hybrid Ultrafiltration Membrane With TiO2-g-PAA Nanoparticles: Preparation and Antifouling Performance
Shushan Yuan et al.
POLYMER ENGINEERING AND SCIENCE (2015)
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
Seyed Farid Seyed Shirazi et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2015)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Polymer-agro-waste composites for removal of Congo red dye from wastewater: adsorption isotherms and kinetics
Renuka R. Gonte et al.
DESALINATION AND WATER TREATMENT (2014)
The use of three-dimensional printing to produce in vitro slice chambers
James Hyde et al.
JOURNAL OF NEUROSCIENCE METHODS (2014)
Experimental and theoretical investigations of Lantana camara oil diffusion from polyacrylonitrile membrane for pulsatile drug delivery system
Vivek Verma et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Electroless nickel coated nano-clay for electrolytic removal of Hg(II) ions
Rajat Arora et al.
RSC ADVANCES (2014)
A review of potential remediation techniques for uranium(VI) ion retrieval from contaminated aqueous environment
Parth D. Bhalara et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2014)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Chemically modified polymer beads for sorption of gold from waste gold solution
Renuka R. Gonte et al.
JOURNAL OF HAZARDOUS MATERIALS (2012)
Mercury Toxicity and Treatment: A Review of the Literature
Robin A. Bernhoft
JOURNAL OF ENVIRONMENTAL AND PUBLIC HEALTH (2012)
Characterization of flat membrane support elaborated from local Moroccan Perlite
A. Majouli et al.
DESALINATION (2011)
Heavy metals and living systems: An overview
Reena Singh et al.
INDIAN JOURNAL OF PHARMACOLOGY (2011)
Selective laser melting of aluminium components
Eleftherios Louvis et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Poly(lactic acid) modifications
Rahul M. Rasal et al.
PROGRESS IN POLYMER SCIENCE (2010)
Biofouling of spiral-wound nanofiltration and reverse osmosis membranes: A feed spacer problem
J. S. Vrouwenvelder et al.
WATER RESEARCH (2009)
Food web-specific biomagnification of persistent organic pollutants
Barry C. Kelly et al.
SCIENCE (2007)
Binding mechanisms in selective laser sintering and selective laser melting
JP Kruth et al.
RAPID PROTOTYPING JOURNAL (2005)
Selective laser melting of iron-based powder
JP Kruth et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Chromium availability in ultramafic soils from New Caledonia
T Becquer et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2003)
Rigorous 3-d mathematical modeling of PEM fuel cells - II. Model predictions with liquid water transport
S Mazumder et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives
GN Levy et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
A combined treatment approach using Fenton's reagent and zero valent iron for the removal of arsenic from drinking water
MVB Krishna et al.
JOURNAL OF HAZARDOUS MATERIALS (2001)
Track etching technique in membrane technology
P Apel
RADIATION MEASUREMENTS (2001)
Electrochemical and spectroscopic study of arsenate removal from water using zero-valent iran media
J Farrell et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2001)
分享论文
