相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Development and thermal performance of a vapor chamber with multi-artery reentrant microchannels for high-power LED
Liang Chen et al.
APPLIED THERMAL ENGINEERING (2020)
Cooling of LED headlamp in automotive by heat pipes
Randeep Singh et al.
APPLIED THERMAL ENGINEERING (2020)
Heat transfer performance and optimization of a close-loop R410A flash evaporation spray cooling
Yan-Ke Lin et al.
APPLIED THERMAL ENGINEERING (2019)
Phase-Change Heat Transfer Measurements Using Temperature-Sensitive Paints
Husain Al Hashimi et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)
LED lighting efficacy: Status and directions
Paul Morgan Pattison et al.
COMPTES RENDUS PHYSIQUE (2018)
From drop impact physics to spray cooling models: a critical review
Jan Breitenbach et al.
EXPERIMENTS IN FLUIDS (2018)
Innovative analytic and experimental methods for thermal management of SMD-type LED chips
Hosung Jang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Heat transfer characteristics of urea-water spray impingement on hot surfaces
Yujun Liao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
INTERACTION OF IMPACTING WATER DROP WITH A HEATED SURFACE AND BREAKUP INTO MICRODROPS
Elizaveta Ya Gatapova et al.
INTERFACIAL PHENOMENA AND HEAT TRANSFER (2018)
Thermal management of high-power LEDs based on integrated heat sink with vapor chamber
Yong Tang et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Active-passive combined and closed-loop control for the thermal management of high-power LED based on a dual synthetic jet actuator
Xiong Deng et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Heat transfer behaviour of a dilute impinging air-water mist jet at low wall temperatures
C. Quinn et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Review of spray cooling - Part 2: High temperature boiling regimes and quenching applications
Gangtao Liang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Review of drop impact on heated walls
Gangtao Liang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
A modified bidirectional thermal resistance model for junction and phosphor temperature estimation in phosphor-converted light-emitting diodes
Yupu Ma et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Review of spray cooling - Part 1: Single-phase and nucleate boiling regimes, and critical heat flux
Gangtao Liang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Phase-change immersion cooling high power heat transfer improvement light emitting diodes and
Xue Kang et al.
MICROELECTRONICS RELIABILITY (2017)
Origin of spray formation during impact on heated surfaces
Michiel A. J. van Limbeek et al.
SOFT MATTER (2017)
Analytical consideration of liquid droplet impingement on solid surfaces
Yukihiro Yonemoto et al.
SCIENTIFIC REPORTS (2017)
A novel cooling system based on heat pipe with fan for thermal management of high-power LEDs
Chengdi Xiao et al.
JOURNAL OF OPTICS-INDIA (2017)
Spray characteristics of pressure-swirl nozzles at different nozzle diameters
Tao Zhang et al.
APPLIED THERMAL ENGINEERING (2017)
Experimental investigation on the performance of a water spray cooling system
Zhou Nianyong et al.
APPLIED THERMAL ENGINEERING (2017)
Enhanced flow boiling in microchannels through integrating multiple micro-nozzles and reentry microcavities
Wenming Li et al.
APPLIED PHYSICS LETTERS (2017)
A thermosyphon heat pipe cooler for high power LEDs cooling
Ji Li et al.
HEAT AND MASS TRANSFER (2016)
Experimental investigation on the thermal performance of a heat sink filled with porous metal fiber sintered felt/paraffin composite phase change material
Hongfei Wang et al.
APPLIED ENERGY (2016)
Effect of thermal conduction path deficiency on thermal properties of LEDs package
Khaoula Ben Abdelmlek et al.
APPLIED THERMAL ENGINEERING (2016)
Thermal distribution of multiple LED module
Jicheng Zhou et al.
APPLIED THERMAL ENGINEERING (2016)
Investigation on thermal characterization of low power SMD LED mounted on different substrate packages
Muna E. Raypah et al.
APPLIED THERMAL ENGINEERING (2016)
A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques
Przemyslaw Smakulski et al.
APPLIED THERMAL ENGINEERING (2016)
Influence of chamber pressure on heat transfer characteristics of a closed loop R134-a spray cooling
Jionghui Liu et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)
Boiling from liquid drops impact on a heated wall
Gangtao Liang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Modelling on the dynamics of droplet impingement and bubble boiling in spray cooling
Jinlong Xie et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Heat and fluid flow in high-power LED packaging and applications
Xiaobing Luo et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2016)
Spray cooling and flash evaporation cooling: The current development and application
Wen-Long Cheng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Heat transfer characteristics of water spray impinging on high temperature stainless steel plate with finite thickness
Ruifeng Dou et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Thermal characteristics for chip on metal package of LED lighting module
Seung-Ryol Maeng et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2015)
Dynamics of high-speed micro-drop impact: numerical simulations and experiments at frame-to-frame times below 100 ns
Claas Willem Visser et al.
SOFT MATTER (2015)
A temperature controller for high power light emitting diodes based on resistive heating and liquid cooling
Hans Baumgartner et al.
APPLIED THERMAL ENGINEERING (2014)
A microspray-based cooling system for high powered LEDs
Shou-Shing Hsieh et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Effect of flow rate and subcooling on spray heat transfer on microporous copper surfaces
Suraj Joottu Thiagarajan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Calculation of the phosphor heat generation in phosphor-converted light-emitting diodes
Xiaobing Luo et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Experimental investigation of inserts configurations and PCM type on the thermal performance of PCM based heat sinks
Saad Mahmoud et al.
APPLIED ENERGY (2013)
Two-phase cooling of light emitting diode for higher light output and increased efficiency
H. Ye et al.
APPLIED THERMAL ENGINEERING (2013)
Experimental investigation of spray cooling on flat and enhanced surfaces
Zhen Zhang et al.
APPLIED THERMAL ENGINEERING (2013)
Modeling the Light Extraction Efficiency of Bi-Layer Phosphors in White LEDs
Run Hu et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2013)
Near-/Mid-Field Effect of Color Mixing for Single Phosphor-Converted Light-Emitting Diode Package
Run Hu et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2013)
Phosphor self-heating in phosphor converted light emitting diode packaging
Xiaobing Luo et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Characterization of spray atomization and heat transfer of pressure swirl nozzles
J. L. Xie et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2013)
Hotspot Location Shift in the High-Power Phosphor-Converted White Light-Emitting Diode Packages
Run Hu et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2013)
Refrigerating liquid prototype for LED's thermal management
Roberto Faranda et al.
APPLIED THERMAL ENGINEERING (2012)
High heat flux spray cooling with ammonia: Investigation of enhanced surfaces for CHF
Huseyin Bostanci et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Breakup and coalescence characteristics of a hollow cone swirling spray
Abhishek Saha et al.
PHYSICS OF FLUIDS (2012)
Experimental characterization of heat transfer in non-boiling spray cooling with two nozzles
Yujia Tao et al.
APPLIED THERMAL ENGINEERING (2011)
Spray characteristics and spray cooling heat transfer in the non-boiling regime
Wen-Long Cheng et al.
ENERGY (2011)
Evaporation and flow dynamics of thin, shear-driven liquid films in microgap channels
O. A. Kabov et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2011)
The measurement of heat transfer from hot surfaces to non-wetting droplets
D. Chatzikyriakou et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)
Comparative study of energy saving light sources
N. Khan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Experimental study of impingement spray cooling for high power devices
Z. B. Yan et al.
APPLIED THERMAL ENGINEERING (2010)
DETAILED NUMERICAL INVESTIGATION OF TURBULENT ATOMIZATION OF LIQUID JETS
H. Pitsch et al.
ATOMIZATION AND SPRAYS (2010)
Phosphors in phosphor-converted white light-emitting diodes Recent advances in materials, techniques and properties
S. Ye et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2010)
Thermal effects in packaging high power light emitting diode arrays
Adam Christensen et al.
APPLIED THERMAL ENGINEERING (2009)
Secondary atomization
D. R. Guildenbecher et al.
EXPERIMENTS IN FLUIDS (2009)
Two-Phase Spray Cooling of Hybrid Vehicle Electronics
Issam Mudawar et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)
Direct Numerical Simulation of Heat Transfer in Spray Cooling Through 3D Multiphase Flow Modeling Using Parallel Computing
Suranjan Sarkar et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2009)
Partially Confined FC-72 Spray-Cooling Performance: Effect of Dissolved Air
Rebekah L. Puterbaugh et al.
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2009)
Inertia dominated drop collisions. II. An analytical solution of the Navier-Stokes equations for a spreading viscous film
Ilia V. Roisman
PHYSICS OF FLUIDS (2009)
Shear-driven flows of locally heated liquid films
Elizaveta Ya. Gatapova et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)
Effects of high subcooling on two-phase spray cooling and critical heat flux
Milan Visaria et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)
Spray water cooling heat transfer at high temperatures and liquid mass fluxes
J. Wendelstorf et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)
A microjet array cooling system for thermal management of high-brightness LEDs
Xiaobing Luo et al.
IEEE TRANSACTIONS ON ADVANCED PACKAGING (2007)
Locally heated shear-driven liquid films in microchannels and minichannels
O. A. Kabov et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2007)
Evaluation of jet impingement, spray and microchannel chip cooling options for high heat flux removal
Satish G. Kandlikar et al.
HEAT TRANSFER ENGINEERING (2007)
Evaporative heat transfer characteristics of a water spray on micro-structured silicon surfaces
CC Hsieh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Single-phase and two-phase cooling characteristics of upward-facing and downward-facing sprays
JR Rybicki et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Spray impingement cooling with single- and multiple-nozzle arrays. Part II: Visualization and empirical models
TA Shedd et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
Solid-state light sources getting smart
EF Schubert et al.
SCIENCE (2005)
Influence of junction temperature on chromaticity and color-rendering properties of trichromatic white-light sources based on light-emitting diodes
S Chhajed et al.
JOURNAL OF APPLIED PHYSICS (2005)
Effect of surface wettability on boiling and evaporation
Y Takata et al.
ENERGY (2005)
Life of LED-Based White Light Sources
Nadarajah Narendran et al.
JOURNAL OF DISPLAY TECHNOLOGY (2005)
Spray cooling characteristics of water and R-134a. Part 1: nucleate boiling
SS Hsieh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Thermocapillary deformation of a locally heated liquid film moving under the action of a gas flow
EY Gatapova et al.
TECHNICAL PHYSICS LETTERS (2004)
Optimal spray characteristics in water spray cooling
RH Chen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Heat transfer characteristics of spray cooling in a closed loop
LC Lin et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)
Effects of spray characteristics on critical heat flux in subcooled water spray cooling
RH Chen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)
Spray cooling under reduced gravity condition
K Yoshida et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2001)
Spray diagnostics for the twenty-first century
WD Bachalo
ATOMIZATION AND SPRAYS (2000)