相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Dual gradient direct ink writing for formation of kaolinite ceramic functionally graded materials
Danna Tang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Scheil ternary projection (STeP) diagrams for designing additively manufactured functionally graded metals
Abdel R. Moustafa et al.
ADDITIVE MANUFACTURING (2020)
A spatial kernel approach for topology optimization
Willem Roux et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
A hybrid density/level set formulation for topology optimization of functionally graded lattice structures
M. Jansen et al.
COMPUTERS & STRUCTURES (2020)
Additive manufacturing of functionally graded Co-Fe and Ni-Fe magnetic materials
Varun Chaudhary et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Thermal induced phase evolution of Fe-Fe3Ni functionally graded material fabricated using the wire-arc additive manufacturing process: An in-situ neutron diffraction study
Chen Shen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
3D gel printing of graded TiC-high manganese steel cermet
Xinyue Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2019)
3D-Printing of Functionally Graded Porous Materials Using On-Demand Reconfigurable Microfluidics
Marco Costantini et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints
Lin Cheng et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Ultra-broadband metamaterial absorber with graphene composites fabricated by 3D printing
Lixian Yin et al.
MATERIALS LETTERS (2019)
Volumetric additive manufacturing via tomographic reconstruction
Brett E. Kelly et al.
SCIENCE (2019)
Elastic and plastic characterization of a new developed additively manufactured functionally graded porous lattice structure: Analytical and numerical models
Mahshid Mahbod et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy
Wei Xiong et al.
MATERIALS & DESIGN (2019)
Additively manufactured functionally graded biodegradable porous iron
Y. Li et al.
ACTA BIOMATERIALIA (2019)
Laser Powder Bed Fusion of Ti-rich TiNi lattice structures: Process optimisation, geometrical integrity, and phase transformations
Chaolin Tan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
Uniform and graded copper open cell ordered foams fabricated by rapid manufacturing: surface morphology, mechanical properties and energy absorption capacity
Gurminder Singh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Metallic integrated thermal protection structures inspired by the Norway spruce stem: Design, numerical simulation and selective laser melting fabrication
Kaijie Lin et al.
OPTICS AND LASER TECHNOLOGY (2019)
Additive manufacturing high performance graphene-based composites: A review
Yan Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Design for 4D printing: A voxel-based modeling and simulation of smart materials
Germain Sossou et al.
MATERIALS & DESIGN (2019)
Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials
Xiang-Yu Zhang et al.
ACTA BIOMATERIALIA (2019)
Investigation of functionally graded TPMS structures fabricated by additive manufacturing
Shixiang Yu et al.
MATERIALS & DESIGN (2019)
Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys
J. S. Zuback et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
The design of additively manufactured lattices to increase the functionality of medical implants
Hanna E. Burton et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion
Le Zhou et al.
SCRIPTA MATERIALIA (2019)
Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties
Lei Yang et al.
MATERIALS & DESIGN (2019)
Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning
Martin P. de Beer et al.
SCIENCE ADVANCES (2019)
Digital design and nonlinear simulation for additive manufacturing of soft lattice structures
O. Weeger et al.
ADDITIVE MANUFACTURING (2019)
Enriched analytical solutions for additive manufacturing modeling and simulation
John C. Steuben et al.
ADDITIVE MANUFACTURING (2019)
Fabrication of Graphene-Reinforced Nanocomposites with Improved Fracture Toughness in Net Shape for Complex 3D Structures via Digital Light Processing
Zuying Feng et al.
C-JOURNAL OF CARBON RESEARCH (2019)
Customized, degradable, functionally graded scaffold for potential treatment of early stage osteonecrosis of the femoral head
Toshiyuki Kawai et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2018)
Functionally Graded Stainless Steel Fabricated by Direct Laser Deposition: Anisotropy of Mechanical Properties and Hardness
Qiang Wang et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2018)
3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients
Dimitri Kokkinis et al.
ADVANCED MATERIALS (2018)
Strengthening the ZrC-SiC ceramic and TC4 alloy brazed joint using laser additive manufactured functionally graded material layers
J. M. Shi et al.
CERAMICS INTERNATIONAL (2018)
Investigation of wax-based barite slurry and deposition for 3D printing landslide model
Danna Tang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Design and characterization of radar absorbing structure based on gradient-refractive-index metamaterials
Lixian Yin et al.
COMPOSITES PART B-ENGINEERING (2018)
Residual stresses and distortion in additively manufactured compositionally graded and dissimilar joints
T. Mukherjee et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing
Dawei Li et al.
COMPUTER-AIDED DESIGN (2018)
A review on functionally graded structures and materials for energy absorption
Fengxiang Xu et al.
ENGINEERING STRUCTURES (2018)
Laser additive manufacturing of structural-graded bulk metallic glass
Yunzhuo Lu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Dilution of Al and V through laser powder deposition enables a continuously compositionally Ti/Ti6Al4V graded structure
Yang Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Characterization of a functionally graded material of Ti-6Al-4V to 304L stainless steel with an intermediate V section
Lourdes D. Bobbio et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Additive Manufacturing of Functionally Graded Material Objects: A Review
Binbin Zhang et al.
JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING (2018)
Investigating and eliminating powder separation in pre-mixed powder supply for laser metal deposition process
Wei Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
A mechanical reduced order model for elastomeric 3D printed architectures
Todd H. Weisgraber et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants
Changjun Han et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Compositionally graded magnetic-nonmagnetic bimetallic structure using laser engineered net shaping
Bryan Heer et al.
MATERIALS LETTERS (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
CT image segmentation methods for bone used in medical additive manufacturing
Maureen van Eijnatten et al.
MEDICAL ENGINEERING & PHYSICS (2018)
Rapid volumetric imaging with Bessel-Beam three-photon microscopy
Bingying Chen et al.
BIOMEDICAL OPTICS EXPRESS (2018)
Fabrication of aluminum alloy functionally graded material using directional solidification under an axial static magnetic field
Shaodong Hu et al.
SCIENTIFIC REPORTS (2018)
In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry
Philip J. DePond et al.
MATERIALS & DESIGN (2018)
Titanium/hydroxyapatite (Ti/HA) gradient materials with quasi-continuous ratios fabricated by SLM: Material interface and fracture toughness
Changjun Han et al.
MATERIALS & DESIGN (2018)
Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM
Dheyaa S. J. Al-Saedi et al.
MATERIALS & DESIGN (2018)
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
Y. Kok et al.
MATERIALS & DESIGN (2018)
3D printing of materials with spatially non-linearly varying properties
Luquan Ren et al.
MATERIALS & DESIGN (2018)
Design of graded lattice structure with optimized mesostructures for additive manufacturing
Yiqiang Wang et al.
MATERIALS & DESIGN (2018)
Heterogeneous microstructure evolution in Ti-6Al-4V alloy thin-wall components deposited by plasma arc additive manufacturing
Jianjun Lin et al.
MATERIALS & DESIGN (2018)
Making data matter: Voxel printing for the digital fabrication of data across scales and domains
Christoph Bader et al.
SCIENCE ADVANCES (2018)
The effects of a functionally-graded scaffold and bone marrow-derived mononuclear cells on steroid-induced femoral head osteonecrosis
Masahiro Maruyama et al.
BIOMATERIALS (2018)
Functionally graded materials from topology optimisation and stereolithography
Tao Liu et al.
EUROPEAN POLYMER JOURNAL (2018)
Experimental study of forced convection heat transfer of graded metal honeycomb fabricated by additive manufacturing
Yongcun Zhang et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)
Characterization of wire arc additively manufactured titanium aluminide functionally graded material: Microstructure, mechanical properties and oxidation behaviour
Jun Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering
Xiang-Yu Zhang et al.
MATERIALS & DESIGN (2018)
Structural design and mechanical response of gradient porous Ti-6Al-4V fabricated by electron beam additive manufacturing
Y. C. Wu et al.
MATERIALS & DESIGN (2018)
CT image segmentation of bone for medical additive manufacturing using a convolutional neural network
Jordi Minnema et al.
COMPUTERS IN BIOLOGY AND MEDICINE (2018)
Monitoring via Machine‐Learning: Machine‐Learning‐Based Monitoring of Laser Powder Bed Fusion (Adv. Mater. Technol. 12/2018)
Bodi Yuan et al.
Advanced Materials Technologies (2018)
Acoustic emission for in situ quality monitoring in additive manufacturing using spectral convolutional neural networks
S. A. Shevchik et al.
ADDITIVE MANUFACTURING (2018)
Additive manufacturing of Inconel 718-Copper alloy bimetallic structure using laser engineered net shaping (LENS™)
Bonny Onuike et al.
ADDITIVE MANUFACTURING (2018)
A systematic approach based on voxel modelling and APDL analysis for Functional-Graded-Material objects
Wei Liu et al.
6TH CIRP GLOBAL WEB CONFERENCE - ENVISAGING THE FUTURE MANUFACTURING, DESIGN, TECHNOLOGIES AND SYSTEMS IN INNOVATION ERA (CIRPE 2018) (2018)
An overview of functionally graded additive manufacturing
Giselle Hsiang Loh et al.
ADDITIVE MANUFACTURING (2018)
Simulation and validation of three dimension functionally graded materials by material jetting
Eduardo Salcedo et al.
ADDITIVE MANUFACTURING (2018)
Numerical study of temperature and cooling rate in selective laser melting with functionally graded support structures
Jie Song et al.
ADDITIVE MANUFACTURING (2018)
In situ defect detection in selective laser melting via full-field infrared thermography
Jamison L. Bartlett et al.
ADDITIVE MANUFACTURING (2018)
Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing
Ajit Panesar et al.
ADDITIVE MANUFACTURING (2018)
Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process
Michaela Fousova et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
Mang Ni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications
Zengqian Liu et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Crystallographic texture control of beta-type Ti-15Mo-5Zr-3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus
Takuya Ishimoto et al.
SCRIPTA MATERIALIA (2017)
Multifunctional graded dielectrics fabricated using dry powder printing
Austin J. Good et al.
SMART MATERIALS AND STRUCTURES (2017)
3D Printed Functionally Graded Plasmonic Constructs
Alexander P. Haring et al.
ADVANCED OPTICAL MATERIALS (2017)
Laser additive processing of a functionally graded internal fracture fixation plate
D. D. Lima et al.
MATERIALS & DESIGN (2017)
Adaptive metamaterials by functionally graded 4D printing
M. Bodaghi et al.
MATERIALS & DESIGN (2017)
Mapping porous microstructures to yield desired mechanical properties for application in 3D printed bone scaffolds and orthopaedic implants
Ling Wang et al.
MATERIALS & DESIGN (2017)
Compressive properties of functionally graded lattice structures manufactured by selective laser melting
Sing Ying Choy et al.
MATERIALS & DESIGN (2017)
A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing
A. O. Aremu et al.
ADDITIVE MANUFACTURING (2017)
Ceramic-Based 4D Components: Additive Manufacturing (AM) of Ceramic-Based Functionally Graded Materials (FGM) by Thermoplastic 3D Printing (T3DP)
Uwe Scheithauer et al.
MATERIALS (2017)
High-stiffness and strength porous maraging steel via topology optimization and selective laser melting
Akihiro Takezawa et al.
ADDITIVE MANUFACTURING (2017)
Development and testing of an additively manufactured monolithic catalyst bed for HTP thruster applications
K. Essa et al.
APPLIED CATALYSIS A-GENERAL (2017)
A study of 4D printing and functionally graded additive manufacturing
Eujin Pei et al.
ASSEMBLY AUTOMATION (2017)
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Theron M. Rodgers et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Biomedical applications of additive manufacturing: Present and future
Sunpreet Singh et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
Use of space-filling curves for additive manufacturing of three dimensionally varying graded dielectric structures using fused deposition modeling
Zachary Larimore et al.
ADDITIVE MANUFACTURING (2017)
Process-Structure Linkages Using a Data Science Approach: Application to Simulated Additive Manufacturing Data
Evdokia Popova et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2017)
Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: Experimental characterization and thermodynamic calculations
Lourdes D. Bobbio et al.
ACTA MATERIALIA (2017)
3D printing of tough hydrogel composites with spatially varying materials properties
Shannon E. Bakarich et al.
ADDITIVE MANUFACTURING (2017)
The development of TiNi-based negative Poisson's ratio structure using selective laser melting
Sheng Li et al.
ACTA MATERIALIA (2016)
Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling
Beth E. Carroll et al.
ACTA MATERIALIA (2016)
Oblique incidence performance of radar absorbing honeycombs
Jiang Feng et al.
COMPOSITES PART B-ENGINEERING (2016)
A coupled Cellular Automaton-Lattice Boltzmann model for grain structure simulation during additive manufacturing
Abha Rai et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
Implicit slicing for functionally tailored additive manufacturing
John C. Steuben et al.
COMPUTER-AIDED DESIGN (2016)
3D printing-assisted osteotomy treatment for the malunion of lateral tibial plateau fracture
Peng Yang et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2016)
In Situ Synchrotron X-Ray Diffraction and Small Angle X-Ray Scattering Studies on Rapidly Heated and Cooled Ti-Al and Al-Cu-Mg Alloys Using Laser-Based Heating
C. Kenel et al.
JOM (2016)
Modeling the Microstructure Evolution During Additive Manufacturing of Ti6Al4V: A Comparison Between Electron Beam Melting and Selective Laser Melting
G. Vastola et al.
JOM (2016)
Predicting Mesoscale Microstructural Evolution in Electron Beam Welding
T. M. Rodgers et al.
JOM (2016)
Anisotropic mechanical behaviors and their structural dependences of crossed-lamellar structure in a bivalve shell
D. Jiao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting
I. Maskery et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Applications of 3D printing in cardiovascular diseases
Andreas A. Giannopoulos et al.
NATURE REVIEWS CARDIOLOGY (2016)
Four-Dimensional Printing Hierarchy Scaffolds with Highly Biocompatible Smart Polymers for Tissue Engineering Applications
Shida Miao et al.
TISSUE ENGINEERING PART C-METHODS (2016)
Fabrication of a Functionally Graded Copper-Zinc Sulfide Phosphor
Jehong Park et al.
SCIENTIFIC REPORTS (2016)
3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement
Beth Ripley et al.
JOURNAL OF CARDIOVASCULAR COMPUTED TOMOGRAPHY (2016)
Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method
A. Zinoviev et al.
MATERIALS & DESIGN (2016)
Influence of the structural orientation on the mechanical properties of selective laser melted Ti6Al4V open-porous scaffolds
Volker Weissmann et al.
MATERIALS & DESIGN (2016)
Structure and mechanics of interfaces in biological materials
Francois Barthelat et al.
NATURE REVIEWS MATERIALS (2016)
Functionally graded materials: A review of fabrication and properties
Minoo Naebe et al.
APPLIED MATERIALS TODAY (2016)
Asymmetric flexural behavior from bamboo's functionally graded hierarchical structure: Underlying mechanisms
Meisam K. Habibi et al.
ACTA BIOMATERIALIA (2015)
Biologically Inspired Dynamic Material Systems
Andre R. Studart
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
MetaMesh: A hierarchical computational model for design and fabrication of biomimetic armored surfaces
Jorge Duro-Royo et al.
COMPUTER-AIDED DESIGN (2015)
Heterogeneous object modeling with material convolution surfaces
Vikas Gupta et al.
COMPUTER-AIDED DESIGN (2015)
Voxel-based fabrication through material property mapping: A design method for bitmap printing
E. L. Doubrovski et al.
COMPUTER-AIDED DESIGN (2015)
An experimental and simulation study on build thickness dependent microstructure for electron beam melted Ti-6Al-4V
Xipeng Tan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing
T. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Micro-scratch and corrosion behavior of functionally graded HA-TiO2 nanostructured composite coatings fabricated by electrophoretic deposition
Hamidreza Farnoush et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Recent development in modeling and analysis of functionally graded materials and structures
Ankit Gupta et al.
PROGRESS IN AEROSPACE SCIENCES (2015)
A 3D-printed, functionally graded soft robot powered by combustion
Nicholas W. Bartlett et al.
SCIENCE (2015)
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Joshua J. Martin et al.
NATURE COMMUNICATIONS (2015)
Evolution of solidification texture during additive manufacturing
H. L. Wei et al.
SCIENTIFIC REPORTS (2015)
Nanoscale Graphene Disk: A Natural Functionally Graded Material-How is Fourier's Law Violated along Radius Direction of 2D Disk
Nuo Yang et al.
SCIENTIFIC REPORTS (2015)
Design and fabrication of functionally graded in-situ aluminium composites for automotive pistons
A. G. Arsha et al.
MATERIALS & DESIGN (2015)
Laser metal deposition of functionally graded Ti6Al4V/TiC
R. M. Mahamood et al.
MATERIALS & DESIGN (2015)
The landslide problem
G. Shanmugam
JOURNAL OF PALAEOGEOGRAPHY-ENGLISH (2015)
Development empirical-intelligent relationship between plasma spray parameters and coating performance of Yttria-Stabilized Zirconia
Amir Hossein Pakseresht et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Design and development of novel bio-based functionally graded foams for enhanced acoustic capabilities
Shahrzad Ghaffari Mosanenzadeh et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Bioinspired structural materials
Ulrike G. K. Wegst et al.
NATURE MATERIALS (2015)
Controlled Sequential Shape Changing Components by 3D Printing of Shape Memory Polymer Multimaterials
Kai Yu et al.
IUTAM SYMPOSIUM ON MECHANICS OF SOFT ACTIVE MATERIALS (2015)
An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
Scott M. Thompson et al.
ADDITIVE MANUFACTURING (2015)
Three-Dimensional Printing Fiber Reinforced Hydrogel Composites
Shannon E. Bakarich et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Bio-inspired impact-resistant composites
L. K. Grunenfelder et al.
ACTA BIOMATERIALIA (2014)
Functionally Graded Alloys Obtained by Additive Manufacturing
Thomas Niendorf et al.
ADVANCED ENGINEERING MATERIALS (2014)
4D printing - revolution or fad?
Eujin Pei
ASSEMBLY AUTOMATION (2014)
Processing and properties of advanced porous ceramics: An application based review
E. C. Hammel et al.
CERAMICS INTERNATIONAL (2014)
In situ TiC-Fe-Al2O3-TiAl/Ti3Al composite coating processing using centrifugal assisted combustion synthesis
Reza Mahmoodian et al.
COMPOSITES PART B-ENGINEERING (2014)
Controllable Growth of Functional Gradient ZnO Material Using Chemical Vapor Deposition
Xing Wang et al.
INTEGRATED FERROELECTRICS (2014)
Statistical analysis and multiobjective optimization of process parameters in plasma spraying of partially stabilized zirconia
Amir Hossein Pakseresht et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Compositionally graded metals: A new frontier of additive manufacturing
Douglas C. Hofmann et al.
JOURNAL OF MATERIALS RESEARCH (2014)
An investigation into the flexural characteristics of functionally graded cobalt chrome femoral stems manufactured using selective laser melting
Kevin Brian Hazlehurst et al.
MATERIALS & DESIGN (2014)
A numerical investigation into the influence of the properties of cobalt chrome cellular structures on the load transfer to the periprosthetic femur following total hip arthroplasty
Kevin Brian Hazlehurst et al.
MEDICAL ENGINEERING & PHYSICS (2014)
Additive manufacturing of graded dielectrics
David A. Roper et al.
SMART MATERIALS AND STRUCTURES (2014)
Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process
Ting-ting Qian et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Multiscale structural gradients enhance the biomechanical functionality of the spider fang
Benny Bar-On et al.
NATURE COMMUNICATIONS (2014)
Water-Based Robotic Fabrication: Large-Scale Additive Manufacturing of Functionally Graded Hydrogel Composites via Multichamber Extrusion
Laia Mogas-Soldevila et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2014)
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Lore Thijs et al.
ACTA MATERIALIA (2013)
Natural Flexible Dermal Armor
Wen Yang et al.
ADVANCED MATERIALS (2013)
Development and characterization of polymer-ceramic continuous fiber reinforced functionally graded composites for aerospace application
Suresh Kumar et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2013)
Structural Biological Materials: Critical Mechanics-Materials Connections
Marc Andre Meyers et al.
SCIENCE (2013)
Multiple material additive manufacturing - Part 1: a review This review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials
Mohammad Vaezi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2013)
A Spider's Fang: How to Design an Injection Needle Using Chitin-Based Composite Material
Yael Politi et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
Freeze-form extrusion fabrication of functionally graded materials
Ming C. Leu et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Gas flow effects on selective laser melting (SLM) manufacturing performance
B. Ferrar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Structure, composition, and mechanical properties of shark teeth
Joachim Enax et al.
JOURNAL OF STRUCTURAL BIOLOGY (2012)
Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC
J. Michael Wilson et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Topology optimization of microstructure and selective laser melting fabrication for metallic biomaterial scaffolds
Xiao Dong-ming et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Kinetics of the formation of metal binder gradient in WC-Co by carbon diffusion induced liquid migration
Jun Guo et al.
ACTA MATERIALIA (2011)
A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications
Jayanthi Parthasarathy et al.
Journal of Manufacturing Processes (2011)
Recent trends in shape forming from colloidal processing: A review
Carolina Tallon et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2011)
CT Angiography: Current Technology and Clinical Use
Kanako K. Kumamaru et al.
RADIOLOGIC CLINICS OF NORTH AMERICA (2010)
Development of Functionally Graded Materials by Ultrasonic Consolidation
S. Kumar
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2010)
Strategies for Zonal Cartilage Repair using Hydrogels
Travis J. Klein et al.
MACROMOLECULAR BIOSCIENCE (2009)
Biomaterial systems for mechanosensing and actuation
Peter Fratzl et al.
NATURE (2009)
A close-up view of wood structure and properties across a growth ring of Norway spruce (Picea abies [L] Karst.)
Michaela Eder et al.
TREES-STRUCTURE AND FUNCTION (2009)
Centrifugal casting of TiAl exhaust valves
P. X. Fu et al.
INTERMETALLICS (2008)
Structure and mechanical properties of selected biological materials
P. -Y Chen et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2008)
A novel functionally graded material in the ZrB2-SiC and ZrO2 system by spark plasma sintering
Chang-Qing Hong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Functionally graded Nylon-11/silica nanocomposites produced by selective laser sintering
Haseung Chung et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Materials design principles of ancient fish armour
Benjamin J. F. Bruet et al.
NATURE MATERIALS (2008)
A topological derivative method for topology optimization
Julian A. Norato et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2007)
A review on fundamentals and applications of electrophoretic deposition (EPD)
Laxmidhar Besra et al.
PROGRESS IN MATERIALS SCIENCE (2007)
Heterogeneous object modeling: A review
X. Y. Kou et al.
COMPUTER-AIDED DESIGN (2007)
Effect of microstructure on the mechanical properties of Haversian cortical bone
T Hoc et al.
BONE (2006)
Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods
A Zhecheva et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
H Seitz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Adhesive/cohesive properties of thermally sprayed functionally graded coatings for polymer matrix composites
M Ivosevic et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2005)
Properties of multilayered mullite/Mo functionally graded materials fabricated by powder metallurgy processing
G Jin et al.
MATERIALS CHEMISTRY AND PHYSICS (2005)
Computer-aided tissue engineering: application to biomimetic modelling and design of tissue scaffolds
W Sun et al.
BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY (2004)
Alumina-doped silica gradient-index (GRIN) lenses by slurry-based three-dimensional printing (S-3DP™)
HR Wang et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2004)
Functionally graded ceramic and ceramic-metal composites shaped by electrophoretic deposition
S Put et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2003)
Activated carbon supported bimetallic CoMo carbides synthesized by carbothermal hydrogen reduction
CH Liang et al.
CARBON (2003)
Processing and characterization of metal-ceramics functionally gradient materials
J Ma et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Nanocrystalline gradient films through chemical vapor synthesis
S Seifried et al.
SCRIPTA MATERIALIA (2001)
A 99 line topology optimization code written in Matlab
O Sigmund
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2001)
Stress ratio and compliance based methods in topology optimization - a critical review
GIN Rozvany
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2001)
Rapid prototyping and combustion synthesis of TiC/Ni functionally gradient materials
YM Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Multiple material objects: from CAD representation to data format for rapid prototyping
WK Chiu et al.
COMPUTER-AIDED DESIGN (2000)
Microstructure and mechanical properties of TiC-Ni functionally graded materials by simultaneous combustion synthesis and compaction
XH Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Effects of residual stress on the performance of plasma sprayed functionally graded ZrO2/NiCoCrAlY coatings
KA Khor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
分享论文
