期刊
METALS
卷 10, 期 5, 页码 -出版社
MDPI
DOI: 10.3390/met10050694
关键词
440C stainless steel; martensite; retained austenite; carbide particle; mechanical properties; work hardening
资金
- University of Sharjah [1602040832-P]
- National University of Malaysia [DIP-2014-024]
The 440C martensitic stainless steel is considered to be among the hardest steels, owing to its high carbon content. Careful heat treatment of this material introduces multiple carbide particles, which can alter microstructure and mechanical properties. This study focused on the effect of austenitisation temperature on the microstructure and tensile properties of 440C steel. Austenitisation was performed on the austenite + carbide region, because 440C steel lacks a single-phase region. The steel was austenitised at two different temperatures; namely, 1160 degrees C and 950 degrees C, and subjected to oil quenching. The as-quenched samples showed a typical lath martensite structure with retained austenite phase. The treatments at 1160 degrees C and 950 degrees C promoted the formation of M7C3 and M23C6 carbides, respectively. The austenite grains in the sample treated at 1160 degrees C showed a higher growth rate than those in the sample treated at 950 degrees C. The sample treated at 1160 degrees C showed low-fraction and a large-size carbide phase. The Zener pinning force decreased, thereby increasing the austenite grain growth in the sample treated at 1160 degrees C. The hardness and 0.2% proof stress of the sample treated at 950 degrees C were higher than those of the sample treated at 1160 degrees C, owing to the higher martensite content in the former. The strength-ductility balance of the sample treated at 950 degrees C was higher than that of the sample treated at 1160 degrees C. The decreased austenitisation temperature resulted in improved mechanical properties of the steel. Therefore, the austenitisation temperature alters the microstructure and mechanical properties of 440C steel.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据