相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of surface potential on corrosion behavior of the fusion boundary in the dissimilar welds between 316L stainless steels and Inconel 182 alloy
Wei Wang et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Microstructual and mechanical studies of the dissimilar tabular joints of Incoloy alloy 825 and AISI 316 stainless steel
Mehdi Safari et al.
JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY (2020)
Evaluation of microstructural and mechanical properties of dissimilar Inconel 625 nickel alloy-UNS S32205 duplex stainless steel weldment using MIG welding
M. Tumer et al.
WELDING IN THE WORLD (2020)
Hydrogen embrittlement of X2CrNiMoCuN25-6-3 super duplex stainless steel welded joints under cathodic protection
Aleksandra Swierczynska et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Review of common failures in heat exchangers - Part I: Mechanical and elevated temperature failures
Murad Ali et al.
ENGINEERING FAILURE ANALYSIS (2020)
Failure analysis of service exposed austenitic stainless steel pipelines
N. Sreevidya et al.
ENGINEERING FAILURE ANALYSIS (2020)
Hydrogen embrittlement of low carbon structural steel at macro-, micro- and nano-levels
Muhammad Wasim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Effects of hydrogen influence on strained steel 1020
B. Mytsyk et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Failure competition behavior of 9Cr/617 dissimilar welded joint during LCF test at elevated temperature
Yaqi Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of surface treatments on microstructure and stress corrosion cracking behavior of 308L weld metal in a primary pressurized water reactor environment
Lijin Dong et al.
CORROSION SCIENCE (2020)
Hybrid Laser Deposition of Fe-Based Metallic Powder under Cryogenic Conditions
Aleksander Lisiecki et al.
METALS (2020)
The Abrasive Wear Resistance of Coatings Manufactured on High-Strength Low-Alloy (HSLA) Offshore Steel in Wet Welding Conditions
Jacek Tomkow et al.
COATINGS (2020)
The Effect of Service on Microstructure and Mechanical Properties of HR3C Heat-Resistant Austenitic Stainless Steel
Grzegorz Golanski et al.
MATERIALS (2020)
Assessment of fatigue and electrochemical corrosion characteristics of dissimilar materials weld between alloy 617 and 12 Cr steel
Hafiz Waqar Ahmad et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
THE WELDED JOINTS STRUCTURE OF THE INCONEL 617 ALLOY DESIGNED FOR HIGH TEMPERATURE OPERATION IN SUPERCRITICAL PARAMETERS BOILERS
J. Adamiec et al.
ARCHIVES OF METALLURGY AND MATERIALS (2020)
Corrosion and high-temperature steam oxidation of E110 alloy and its laser welds after ion irradiation
Mikhail S. Slobodyan et al.
CORROSION SCIENCE (2019)
The Influence of the Post-Weld Heat Treatment on the Microstructure of Inconel 625/Carbon Steel Bimetal Joint Obtained by Explosive Welding
Robert Kosturek et al.
METALS (2019)
Analysis of Residual Stresses in the Transition Zone of Tube-to-Tubesheet Joints
Abdel-Hakim Bouzid et al.
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2019)
Investigation on the fusion zone microstructures and mechanical integrity of AISI 904L and Inconel 625 weld joints
K. Devendranath Ramkumar et al.
MATERIALS RESEARCH EXPRESS (2019)
Microstructure and mechanical properties of the vacuum diffusion bonding joints of 4J29 kovar alloy and 316L stainless steel using pure cobalt interlayer
Y. J. Fang et al.
VACUUM (2019)
Electrochemical Impedance Analysis on Cryogenically Treated Dissimilar Metal Welding of 316L Stainless Steel and Monel 400 Alloy Using GTAW
Cherish Mani et al.
METALS (2019)
Structure Investigation of Titanium Metallization Coating Deposited onto AlN Ceramics Substrate by Means of Friction Surfacing Process
Tomasz Chmielewski et al.
COATINGS (2019)
ORBITAL TIG WELDING OF TITANIUM TUBES WITH PERFORATED BOTTOM MADE OF TITANIUM-CLAD STEEL
J. Gorka et al.
ADVANCES IN MATERIALS SCIENCE (2019)
NUMERICAL SIMULATIONS OF X22CrMoV12-1 STEEL MULTILAYER WELDING
T. Kik et al.
ARCHIVES OF METALLURGY AND MATERIALS (2019)
Corrosion Resistance of Dissimilar Joints of AISI 316L and Inconel 718 Alloys
Gianne Moreira Silva et al.
SOLDAGEM & INSPECAO (2019)
Comparative study of microstructure and properties of low-alloy-steel/nickel-based-alloy interfaces in dissimilar metal weld joints prepared by different GTAW methods
Hongliang Ming et al.
MATERIALS CHARACTERIZATION (2018)
Evaluating the Properties of Dissimilar Metal Welding Between Inconel 625 and 316L Stainless Steel by Applying Different Welding Methods and Consumables
Ahmad Kourdani et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Ultrasonic Inspection of a 9% Ni Steel Joint Welded with Ni-based Superalloy 625: Simulation and Experimentation
Joao da Cruz Payao Filho et al.
METALS (2018)
Microstructural and Mechanical Characterization of Dissimilar Metal Welding of Inconel 625 and AISI 316L
Fatih Dokme et al.
METALS (2018)
Metallurgical Characterization of Dissimilar Joints Inconel 718-Inox 316L Welded by the Autogenous TIG Process
Rudineli Demarque et al.
SOLDAGEM & INSPECAO (2018)
Consumable selection for arc welding between Stainless Steel 410 and Inconel 718
Fatemeh Hejripour et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
The effect of the solution treatment onto the microstructure and mechanical properties of MAG pulsed welded joints from X2CrNiMoN22-5-3 Duplex stainless steels
I. Mitelea et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2017)
Studies on the structural property, mechanical relationships and corrosion behaviour of Inconel 718 and SS 316L dissimilar joints by TIG welding without using activated flux
T. Ramkumar et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Microstructure characteristic and mechanical property of pulsed laser lap-welded nickel-based superalloy and stainless steel
Siyu Zhou et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
EFFECTS OF HEAT INPUT ON THE MECHANICAL AND METALLURGICAL CHARACTERISTICS OF TIG WELDED INCOLOY 800HT JOINTS
S. Arun Kumar et al.
ARCHIVES OF METALLURGY AND MATERIALS (2017)
MICROSTRUCTURE AND PROPERTIES OF A REPAIR WELD IN A NICKEL BASED SUPERALLOY GAS TURBINE COMPONENT
L. Rakoczy et al.
ADVANCES IN MATERIALS SCIENCE (2017)
Microstructural and weldability analysis of Inconel617/AISI 310 stainless steel dissimilar welds
H. Shah Hosseini et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2016)
Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding
J. F. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Characterization of metallurgical and mechanical properties on the multi-pass welding of Inconel 625 and AISI 316L
K. Gokul Kumar et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Microstructural characterization of dissimilar welds between Incoloy 800H and 321 Austenitic Stainless Steel
G. Sayiram et al.
MATERIALS CHARACTERIZATION (2015)
Microstructures and microhardness at fusion boundary of 316 stainless steel/Inconel 182 dissimilar welding
Wei Wang et al.
MATERIALS CHARACTERIZATION (2015)
An investigation on microstructure and properties of dissimilar welded Inconel 625 and SUS 304 using high-power CO2 laser
Gang Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
An assessment of microstructure, mechanical properties and corrosion resistance of dissimilar welds between Inconel 718 and 310S austenitic stainless steel
A. Mortezaie et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2014)
Characterization of Microstructure and Mechanical Properties of Inconel 625 and AISI 304 Dissimilar Weldments
Kasinath Devendranath Ramkumar et al.
ISIJ INTERNATIONAL (2014)
Influence of filler metals and welding techniques on the structure-property relationships of Inconel 718 and AISI 316L dissimilar weldments
K. Devendranath Ramkumar et al.
MATERIALS & DESIGN (2014)
Microstructure and hardness studies of electron beam welded Inconel 625 and stainless steel 304L
M. Shakil et al.
VACUUM (2014)