相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Design and development of ring-on-ring jig for biaxial strength testing of brittle ceramic composite materials: ZrB2-30wt-%SiB6
Alejandro Carrasco-Pena et al.
ADVANCES IN APPLIED CERAMICS (2019)
Systematic error in conventionally measured Raman spectra of boron carbide-A general issue in solid state Raman spectroscopy
Helmut Werheit
REVIEW OF SCIENTIFIC INSTRUMENTS (2019)
Does grain size have an influence on intrinsic mechanical properties and conduction mechanism of near fully-dense boron carbide ceramics?
Bibi Malmal Moshtaghioun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Phonon peculiarities at the high-pressure phase transition of B4.3C boron carbide
Helmut Werheit et al.
SOLID STATE SCIENCES (2019)
Boron carbide B4C ceramics with enhanced physico-mechanical properties sintered from multimodal powder of plasma dynamic synthesis
Alexander Sivkov et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Sintering dense boron carbide without grain growth under high pressure
Lixin Liu et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)
Comparisons of the densification, microstructure and mechanical properties of boron carbide sintered by hot pressing and spark plasma sintering
Xiaorong Zhang et al.
CERAMICS INTERNATIONAL (2018)
Fabricating geometrically-complex B4C ceramic components by robocasting and pressureless spark plasma sintering
Siamak Eqtesadi et al.
SCRIPTA MATERIALIA (2018)
Fully dense B4C ceramics fabricated by spark plasma sintering at relatively low temperature
Qi Song et al.
MATERIALS RESEARCH EXPRESS (2018)
Static and dynamic compression strength of hot-pressed boron carbide using a dumbbell-shaped specimen
Jeffrey J. Swab et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Mode Gruneisen parameters of boron carbide
Helmut Werheit et al.
SOLID STATE SCIENCES (2017)
Microstructural characterization of boron-rich boron carbide
Kelvin Y. Xie et al.
ACTA MATERIALIA (2017)
Rate-Dependent Mechanical Behavior and Amorphization of Ultrafine-Grained Boron Carbide
Matthew DeVries et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Ultrafast-Contactless Flash Sintering using Plasma Electrodes
Theo Saunders et al.
SCIENTIFIC REPORTS (2016)
Initiation of a plastic flow in boron carbide at nanoindentation
S. N. Dub et al.
JOURNAL OF SUPERHARD MATERIALS (2015)
Fracture Toughness of Advanced Structural Ceramics: Applying ASTM C1421
Jeffrey J. Swab et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)
Sintering boron carbide ceramics without grain growth by plastic deformation as the dominant densification mechanism
Wei Ji et al.
SCIENTIFIC REPORTS (2015)
Densification behavior and related phenomena of spark plasma sintered boron carbide
Xiaoguang Li et al.
CERAMICS INTERNATIONAL (2014)
Influence of spark plasma sintering parameters on densification and mechanical properties of boron carbide
K. Sairam et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Comparative nanoindentation of single crystals of hard and superhard oxidess
N. Dub et al.
JOURNAL OF SUPERHARD MATERIALS (2014)
Additive-free superhard B4C with ultrafine-grained dense microstructures
B. Malmal Moshtaghioun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
A dense and tough (B4C-TiB2)-B4C 'composite within a composite' produced by spark plasma sintering
I. Bogomol et al.
SCRIPTA MATERIALIA (2014)
Effect of spark plasma sintering parameters on microstructure and room-temperature hardness and toughness of fine-grained boron carbide (B4C)
Bibi Malmal Moshtaghioun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Development of B4C-HfB2 composites by reaction hot pressing
K. Sairam et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Boron Carbide: Structure, Properties, and Stability under Stress
Vladislav Domnich et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
In situ synthesis and densification of submicrometer-grained B4C-TiB2 composites by pulsed electric current sintering
S. G. Huang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Microstructure and mechanical properties of pulsed electric current sintered B4C-TiB2 composites
S. G. Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Gap-state related photoluminescence in boron carbide
Helmut Werheit et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2011)
Flexural Strength, Fracture Toughness, and Hardness of Silicon Carbide and Boron Carbide Armor Ceramics
Lionel Vargas-Gonzalez et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2010)
Effect of Al addition on pressureless sintering of B4C
Mehri Mashhadi et al.
CERAMICS INTERNATIONAL (2009)
Mechanical properties and structure of amorphous and crystalline B4C films
V. Kulikovsky et al.
DIAMOND AND RELATED MATERIALS (2009)
Static and dynamic mechanical properties of boron carbide processed by spark plasma sintering
S. Hayun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Hypothetically superhard boron carbide structures with a B11C icosahedron and three-atom chain
Sezgin Aydin et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2009)
Depressurization Amorphization of Single-Crystal Boron Carbide
X. Q. Yan et al.
PHYSICAL REVIEW LETTERS (2009)
Effects of rolling and hot pressing on mechanical properties of boron carbide-based ceramics
Nina Orlovskaya et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Polyhedral boron cage compounds: an account
Narayan S. Hosmane et al.
MAIN GROUP CHEMISTRY (2007)
Shock compression behaviors of boron carbide (B4C)
Y. Zhang et al.
JOURNAL OF APPLIED PHYSICS (2006)
On the elastic properties and mechanical damping of Ti3SiC2, Ti3GeC2, Ti3Si0.5Al0.5C2 and Ti2AlC in the 300-1573 K temperature range
M. Radovic et al.
ACTA MATERIALIA (2006)
Bond ionicities and hardness of B13C2-like structured ByX crystals (X=C,N,O,P,As)
XJ Guo et al.
PHYSICAL REVIEW B (2006)
Pressureless sintering of boron carbide
TK Roy et al.
CERAMICS INTERNATIONAL (2006)
Robust design and manufacturing of ceramic laminates with controlled thermal residual stresses for enhanced toughness
N Orlovskaya et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Comparison of different experimental techniques for determination of elastic properties of solids
M Radovic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen
M Radovic et al.
ACTA MATERIALIA (2004)
Pressureless sintering of boron carbide
H Lee et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)
B4C-CrB2 composites with improved mechanical properties
S Yamada et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2003)
Nanoindentation and Raman spectroscopy studies of boron carbide single crystals
V Domnich et al.
APPLIED PHYSICS LETTERS (2002)
Room temperature single crystal elastic constants of boron carbide
KJ McClellan et al.
JOURNAL OF MATERIALS SCIENCE (2001)
Laser ultrasonics for measurements of high-temperature elastic properties and internal temperature distribution
T Matsumoto et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2001)
Strength and creep in boron carbide (B4C) and aluminum dodecabovide (α-AIB12)
TG Abzianidze et al.
JOURNAL OF SOLID STATE CHEMISTRY (2000)
Atomic structure and vibrational properties of icosahedral α-boron and B4C boron carbide
N Vast et al.
COMPUTATIONAL MATERIALS SCIENCE (2000)
Prediction of strength of recrystallized siliconcarbide from pore size measurement - Part II - The reliability of the prediction
H Peterlik et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Prediction of strength of recrystallized siliconcarbide from pore size measurement - Part I - The bimodality of the distribution
N Orlovskaja et al.
JOURNAL OF MATERIALS SCIENCE (2000)