相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Balance between bonding and deposition during fused deposition modeling of polycarbonate and acrylonitrile-butadiene-styrene composites
Ying-Guo Zhou et al.
POLYMER COMPOSITES (2020)
Improvement of the dispersity of micro-nano particles for PP/PVC composites using gas-assisted dispersion in a controlled foaming process
Ying-Guo Zhou et al.
POLYMER ENGINEERING AND SCIENCE (2020)
Anisotropic polypropylene cellular polymers filled with nanoclays: Microstructure and properties
A. Lopez-Gil et al.
POLYMER COMPOSITES (2019)
Enhanced dispersion, flame retardancy and mechanical properties of polypropylene/intumescent flame retardant composites via supercritical CO2 foaming followed by defoaming
Pengke Huang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Effect of temperature on thermal, mechanical and morphological properties of polypropylene foams prepared by single step and two step batch foaming process
Anish Kumar et al.
JOURNAL OF POLYMER RESEARCH (2019)
Effect of Compatibility on the Foaming Behavior of Injection Molded Polypropylene and Polycarbonate Blend Parts
Bei Su et al.
POLYMERS (2019)
Effect of acrylonitrile-butadiene-styrene terpolymer on the foaming behavior of polypropylene
Xiao-Tian Tan et al.
CELLULAR POLYMERS (2019)
Correlation of Micro- and Macrostructural Attributes with the Foamability of Modified Polypropylene Using Supercritical CO2
Debjyoti Banerjee et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Creating orientated cellular structure in thermoplastic polyurethane through strong interfacial shear interaction and supercritical carbon dioxide foaming for largely improving the foam compression performance
Junsong Li et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2019)
Investigation of the mold-filling phenomenon in high-pressure foam injection molding and its effects on the cellular structure in expanded foams
Mike Tromm et al.
POLYMER (2019)
Influence of molecular structure on the foamability of polypropylene: Linear and extensional rheological fingerprint
Ebrahim Bahreini et al.
JOURNAL OF CELLULAR PLASTICS (2018)
Mechanical properties, fiber orientation, and length distribution of glass fiber-reinforced polypropylene parts: Influence of water-foaming technology
Ying-Guo Zhou et al.
POLYMER COMPOSITES (2018)
Effect of mold opening on the properties of PLA samples obtained by foam injection molding
Valentina Volpe et al.
POLYMER ENGINEERING AND SCIENCE (2018)
Evaluation of polypropylene/clay nanocomposite foamability based on their morphological and rheological aspects
Anindya Dutta et al.
JOURNAL OF CELLULAR PLASTICS (2018)
A Taguchi analysis on structural properties of polypropylene microcellular nanocomposite foams containing Fe2O3 nanoparticles in batch process
Siamak Molani et al.
PLASTICS RUBBER AND COMPOSITES (2018)
Creep and recovery behavior of injection-molded isotactic polypropylene with controllable skin-core structure
Xin Wang et al.
POLYMER TESTING (2018)
A new core-back foam injection molding method with chemical blowing agents
Hao Wu et al.
MATERIALS & DESIGN (2018)
Polystyrene Foam with High Cell Density and Small Cell Size by Compression-Injection Molding and Core Back Foaming Technique: Evolution of Cells in Cavity
Tiantian Bai et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Microcellular injection molding process for producing lightweight thermoplastic polyurethane with customizable properties
Thomas Ellingham et al.
FRONTIERS OF MECHANICAL ENGINEERING (2018)
Effect of Cold-Drawn Fibers on the Self-Reinforcement of PP/LDPE Composites
Ying-Guo Zhou et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Influence of foaming technology on fibre breakage in long fibre-reinforced polypropylene composites parts
Bei Su et al.
PLASTICS RUBBER AND COMPOSITES (2017)
Fabrication of lightweight microcellular foams in injection-molded polypropylene using the synergy of long-chain branches and crystal nucleating agents
Long Wang et al.
POLYMER (2017)
Deposition-induced effects of isotactic polypropylene and polycarbonate composites during fused deposition modeling
Ying-Guo Zhou et al.
RAPID PROTOTYPING JOURNAL (2017)
A novel gas-assisted microcellular injection molding method for preparing lightweight foams with superior surface appearance and enhanced mechanical performance
Junji Hou et al.
MATERIALS & DESIGN (2017)
Influence of Processing Conditions on the Morphological Structure and Ductility of Water-Foamed Injection Molded PP/LDPE Blended Parts
Ying-Guo Zhou et al.
CELLULAR POLYMERS (2017)
Study of the foaming mechanisms associated with gas counter pressure and mold opening using the pressure profiles
John W. S. Lee et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Dual-scale modeling and simulation of film casting of isotactic polypropylene
Ying-Guo Zhou et al.
JOURNAL OF PLASTIC FILM & SHEETING (2016)
Plane-compression properties of microcellular injected polypropylene using gas counter pressure and core-back expansion process
Jose Antonio Reglero Ruiz et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2016)
Fabrication of super-ductile PP/LDPE blended parts with a chemical blowing agent
Ying-Guo Zhou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Nanocellular polymer foams nucleated by core-shell nanoparticles
Shanqiu Liu et al.
POLYMER (2016)
Preparation of polymer foams with a gradient of cell size: Further exploring the nucleation effect of porous inorganic materials in polymer foaming
Jiaqi Yu et al.
MATERIALS TODAY COMMUNICATIONS (2016)
Microcellular to nanocellular polymer foams: Progress (2004-2015) and future directions - A review
Chimezie Okolieocha et al.
EUROPEAN POLYMER JOURNAL (2015)
High melt strength polypropylene by ionic modification: Preparation, rheological properties and foaming behaviors
Yan Li et al.
POLYMER (2015)
Morphological analysis of microcellular PP produced in a core-back injection process using chemical blowing agents and gas counter pressure
Jose Antonio Reglero Ruiz et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Preparation and Foamability of High Melt Strength Polypropylene Based on Grafting Vinyl Polydimethylsiloxane and Styrene
Shuai Zhou et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Current Issues and Challenges in Polypropylene Foaming: A Review
Abolfazi Mohebbi et al.
CELLULAR POLYMERS (2015)
Influence of foam agent content and talc filler on the microcellular and mechanical properties of injection molded polypropylene and talc filled polypropylene composite foams
S. H. Yetgin et al.
JOURNAL OF CELLULAR PLASTICS (2014)
Multifunctional polymer foams with carbon nanoparticles
Marcelo Antunes et al.
PROGRESS IN POLYMER SCIENCE (2014)
Foaming behavior of microcellular foam polypropylene/modified nano calcium carbonate composites
Jie Ding et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
In situ fibrillation of CO2-philic polymers: Sustainable route to polymer foams in a continuous process
Ali Rizvi et al.
POLYMER (2013)
Mechanism of extensional stress-induced cell formation in polymeric foaming processes with the presence of nucleating agents
Siu N. Leung et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2012)
Extrusion foaming of polystyrene/carbon particles using carbon dioxide and water as co-blowing agents
Cailiang Zhang et al.
POLYMER (2011)
New challenges in polymer foaming: A review of extrusion processes assisted by supercritical carbon dioxide
Martial Sauceau et al.
PROGRESS IN POLYMER SCIENCE (2011)
Use of Nanoparticles for Improving the Foaming Behaviors of Linear PP
W. G. Zheng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Understanding melt rheology and foamability of polypropylene-based TPO blends
F. Gunkel et al.
JOURNAL OF CELLULAR PLASTICS (2008)
Foaming behavior of polypropylene/polystyrene blends enhanced by improved interfacial compatibility
Wentao Zhai et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2008)
Fundamental foaming mechanisms governing the volume expansion of extruded polypropylene foams
HE Naguib et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Effect of the high-density polyethylene melt index on the microcellular foaming of high-density polyethylene/polypropylene blends
P Rachtanapun et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
分享论文
