Electron beam treatment for potable water reuse: Removal of bromate and perfluorooctanoic acid

Water reuse is an alternative strategy targeting water shortages. In this study, electron beam (eBeam) irradiation was investigated as a method for removing bromate and perfluorooctanoic acid (PFOA) from a synthetic water designed to simulate a treated wastewater intended for potable water reuse. In the absence of oxygen, an exponential model was able to relate bromate concentration to absorbed dose. However, a more complex model was needed to describe PFOA defluorination, so a model was developed that assumed formation of one partially defluorinated intermediate and this model was used to describe the relationship between free fluoride concentration and absorbed dose. Nitrate negatively affected the removal of bromate and the dose constant was inversely proportional to the nitrate concentration as predicted by a simple model that assumes the presence of radical scavengers. In contrast, the presence of nitrate improved the degradation of PFOA, possibly due to formation of oxidizing radicals or by other reactions of nitrate degradation products. Fulvic acid and alkalinity exerted negligible influences on bromate removal. Fulvic acid dampened the defluorination efficiency, probably due to the scavenging of oxidizing radicals such as the hydroxyl radical (center dot OH). Alkalinity was found to accelerate PFOA defluorination, possibly because of the formation and reactivity of the carbonate radical (CO3-center dot). As pH increased from 5.0 to 7.3, the dose constant for bromate removal increased from 0.45 kGy(-1) to 0.69 kGy(-1), but it barely changed when pH was further increased to 9.0. In the presence of oxygen, both contaminants were degraded less efficiently and showed more complex patterns of degradation. Pretreatment to remove dissolved oxygen would probably be needed to apply eBeam in practice for degradation of bromate and PFOA. (C) 2016 Elsevier B.V. All rights reserved.