相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Multiscale Analysis of the Effect of Debris on Fretting Wear Process Using a Semi-Concurrent Method
Shengjie Wang et al.
CMC-COMPUTERS MATERIALS & CONTINUA (2020)
Enhancing high-temperature strength of B4C-6061Al neutron absorber material by in-situ Mg(Al)B2
Y. N. Zan et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Microstructure evolution and mechanical properties of B4C/6061Al neutron absorber composite sheets fabricated by powder metallurgy
H. S. Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Influence of Thermal Fatigue on the Wear Behavior of Brake Discs Sliding against Organic and Semimetallic Friction Materials
M. Djafri et al.
TRIBOLOGY TRANSACTIONS (2018)
Distribution of the microalloying element Cu in B4C-reinforced 6061Al composites
Y. T. Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Multiscale analysis of the effect of roughness on fretting wear
K. Pereira et al.
TRIBOLOGY INTERNATIONAL (2017)
Experimental Analysis on Sliding Wear Behaviour of Aluminium-6063 with SiC Particulate Composites
A. Karthikeyan et al.
INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA (2017)
Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O/B4C/SiC particles
Sener Karabulut et al.
COMPOSITES PART B-ENGINEERING (2016)
Investigation of microstructure and wear behaviors of al matrix composites reinforced by carbon nanotube
Musa Yildirim et al.
FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2016)
Wear behavior of Al 5252 alloy reinforced with micrometric and nanometric SiC particles
Mohammad Moazami-Goudarzi et al.
TRIBOLOGY INTERNATIONAL (2016)
A Numerical Study on the Effect of Debris Layer on Fretting Wear
Tongyan Yue et al.
MATERIALS (2016)
Processing and Performance Characteristics of Aluminum-Nano Boron Carbide Metal Matrix Nanocomposites
Lakshmanan Poovazhagan et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
ANALYSIS OF WELDING PROPERTIES IN FSW ALUMINIUM 6351 ALLOY PLATES ADDED WITH SILICON CARBIDE PARTICLES
S. Nallusamy
INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA (2016)
Interfacial reaction mechanism between matrix and reinforcement in B4C/6061Al composites
Y. Z. Li et al.
MATERIALS CHEMISTRY AND PHYSICS (2015)
Wear performance of Al/TiN dispersion strengthened surface composite produced through friction stir process: A comparison of tool geometries and number of passes
R. Hashemi et al.
WEAR (2015)
Fabrication of Al5083/B4C surface composite by friction stir processing and its tribological characterization
Narayana Yuvaraj et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
Modeling Tensile Strength of Al-SiC Functionally Graded Composite Produced Using Friction Stir Processing (FSP)
M. Saadatmand et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2015)
Recent Developments in Friction Stir Welding of Al-alloys
Gurel Cam et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Evaluation of mechanical properties of aluminium alloy-alumina-boron carbide metal matrix composites
B. Vijaya Ramnath et al.
MATERIALS & DESIGN (2014)
Preparation and Evaluation of Mechanical Properties of 6061Al-B4Cp Composites Produced via Two-Stage Melt Stirring
V. Auradi et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Microstructure and texture development during friction stir processing of Al-Mg alloy sheets with TiO2 nanoparticles
F. Khodabakhshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Finite element analysis of stress singularity in partial slip and gross sliding regimes in fretting wear
Tongyan Yue et al.
WEAR (2014)
Influence of B4C on the tribological and mechanical properties of Al 7075-B4C composites
A. Baradeswaran et al.
COMPOSITES PART B-ENGINEERING (2013)
Influence of rotational speed and reinforcements on wear and mechanical properties of aluminum hybrid composites via friction stir processing
A. Devaraju et al.
MATERIALS & DESIGN (2013)
Investigation of microstructure and mechanical properties of aluminum hybrid nano-composites with the additions of solid lubricant
P. Ravindran et al.
MATERIALS & DESIGN (2013)
Composite fabrication using friction stir processing-a review
H. S. Arora et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Microstructure and sliding wear behavior of AA6360/(TiC+B4C) hybrid surface composite layer synthesized by friction stir processing on aluminum substrate
C. Maxwell Rejil et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructural and tribological properties of Al5083 based surface hybrid composite produced by friction stir processing
S. Soleymani et al.
WEAR (2012)
Reciprocal dry sliding wear behaviour of B4Cp reinforced aluminium alloy matrix composites
F. Toptan et al.
WEAR (2012)
Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing
S. A. Alidokht et al.
MATERIALS & DESIGN (2011)
Processing and microstructural characterisation of AA 1070 and AA 6063 matrix B4Cp reinforced composites
Fatih Toptan et al.
MATERIALS & DESIGN (2010)
The properties and microstructure of hybrid composites reinforced with WO3 particles and Al18B4O33 whiskers by squeeze casting
Y. C. Feng et al.
MATERIALS & DESIGN (2009)
Friction and wear properties of short carbon fiber reinforced aluminum matrix composites
Liu Lei et al.
WEAR (2009)
Investigation of tribological and mechanical properties Al2O3-SiC reinforced Al composites manufactured by casting or P/M method
Bekir Sadik Unlu
MATERIALS & DESIGN (2008)
Dry sliding friction and wear properties of B4C particulate-reinforced Al-5083 matrix composites
Feng Tang et al.
WEAR (2008)
Investigation of impact behaviour of aluminium based SiC particle reinforced metal-matrix composites
Sedat Ozden et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Strain hardening behaviour and temperature effect on Al-2124/SiCp
E Martín et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites:: a comparative study
KM Shorowordi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Effect of limited matrix-reinforcement interfacial reaction on enhancing the mechanical properties of aluminium-silicon carbide composites
LM Tham et al.
ACTA MATERIALIA (2001)
Influence of SiC and Al2O3 particulate reinforcements and heat treatments on mechanical properties and damage evolution of Al-2618 metal matrix composites
MZ Tan et al.
JOURNAL OF MATERIALS SCIENCE (2001)
分享论文
