相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Matrix failures effect on damage evolution of particle reinforced composites
Heng Cai et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2021)
Assessing effective properties of continuous carbon fiber-reinforced composites with the preset cracks
Jiale Xi et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2021)
A new three-dimensional parametric FVDAM for investigating the effective elastic moduli of particle-reinforced composites with interphase
Junjie Ye et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2019)
A multi-scale model for studying failure mechanisms of composite wind turbine blades
Junjie Ye et al.
COMPOSITE STRUCTURES (2019)
A new constitutive model of micro-particle reinforced metal matrix composites with damage effects
Haoxuan Ban et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Predicting the effective mechanical property of heterogeneous materials by image based modeling and deep learning
Xiang Li et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Thermal cycling influences on compressive deformations of laminate composites
Junjie Ye et al.
POLYMER COMPOSITES (2019)
Influence of the size and boundary conditions on the predicted effective strengths of particulate reinforced metal matrix composites (PRMMCs)
Geng Chen et al.
COMPOSITE STRUCTURES (2018)
Microstructure and mechanical behavior of AA2024 aluminum matrix composites reinforced with in situ synthesized ZrB2 particles
N. Muralidharan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Simulations of deformation and damage processes of SiCp/Al composites during tension
J. F. Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process
Y. Pazhouhanfar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Simulation of anisotropic load transfer and stress distribution in sicp/Al composites subjected to tensile loading
J. F. Zhang et al.
MECHANICS OF MATERIALS (2018)
A multi-scale modeling scheme for damage analysis of composite structures based on the High-Fidelity Generalized Method of Cells
Junjie Ye et al.
COMPOSITE STRUCTURES (2018)
Investigation on the mechanical properties of epoxy resin with void defects using digital image correlation and image-based finite element method
Panding Wang et al.
POLYMER TESTING (2018)
Finite element modeling of effective thermomechanical properties of Al-B4C metal matrix composites
Neeraj Kumar Sharma et al.
JOURNAL OF MATERIALS SCIENCE (2017)
The coupling effect of size and damage in micro-scale metallic materials
Haoxuan Ban et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide
K. Ravi Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Collapse mechanisms of metal foam matrix composites under static and dynamic loading conditions
Emanoil Linul et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Experimental characterization and numerical modeling of thermomechanical properties of Al-B4C composites
Neeraj Kumar Sharma et al.
CERAMICS INTERNATIONAL (2017)
Three-dimensional microstructure modeling of particulate composites using statistical synthetic structure and its thermo-mechanical finite element analysis
Hyung Keun Park et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Finite-volume homogenization of elastic/viscoelastic periodic materials
Qiang Chen et al.
COMPOSITE STRUCTURES (2017)
Numerical analysis of the mechanical behavior of ZTAp/Fe composites
Wanting Zhang et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Modelling the elastic properties of bi-continuous composite microstructures captured with TriBeam serial-sectioning
Paul J. Mignone et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Analytical effective elastic properties of particulate composites with soft interfaces around anisotropic particles
Wenxiang Xu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites
Jie Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
3D micromechanical analysis of thermo-mechanical behavior of Al2O3/Al metal matrix composites
Neeraj Kumar Sharma et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
Boron carbide reinforced aluminium matrix composite: Physical, mechanical characterization and mathematical modelling
K. Shirvanimoghaddam et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
3D microstructure-based simulations of strength and ductility of bimodal nanostructured metals
Q. D. Ouyang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure and mechanical properties of Al-nano/micro SiC composites produced by stir casting technique
K. Amouri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
3D micromechanical modeling of dual phase steels using the representative volume element method
Maedeh Amirmaleki et al.
MECHANICS OF MATERIALS (2016)
Development of RVE-embedded solid elements model for predicting effective elastic constants of discontinuous fiber reinforced composites
Hui Liu et al.
MECHANICS OF MATERIALS (2016)
Interfacial strength and deformation mechanism of SiC-Al composite micro-pillars
Xiaolei Guo et al.
SCRIPTA MATERIALIA (2016)
Plasticity dependent damage evolution in composites with strain-gradient effects
Brian Nyvang Legarth
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
The Influence of Particle Shapes on Strength and Damage Properties of Metal Matrix Composites
Hai Qing
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2015)
Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites
I. Balasubramanian et al.
MATERIALS & DESIGN (2015)
Effect of reinforcement shape on physical properties and representative volume element of particles-reinforced composites: Statistical and numerical approaches
A. El Moumen et al.
MECHANICS OF MATERIALS (2015)
Homogenization of the average thermo-elastoplastic properties of particle reinforced metal matrix composites: The minimum representative volume element size
X. X. Zhang et al.
COMPOSITE STRUCTURES (2014)
3D microstructure modeling of long fiber reinforced thermoplastics
S. Fliegener et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Micromechanical study of influence of interface strength on mechanical properties of metal matrix composites under uniaxial and biaxial tensile loadings
Hai Qing
COMPUTATIONAL MATERIALS SCIENCE (2014)
Descriptor-based methodology for statistical characterization and 3D reconstruction of microstructural materials
Hongyi Xu et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Experimental evaluation of the influence of processing parameters on the mechanical properties of SiC particle reinforced AA6061 aluminium alloy matrix composite by powder processing
V. Umasankar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Microstructure-Based Numerical Simulation of the Tensile Behavior of SiCp/Al Composites
Y. Kan et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Serial sectioning methods for 3D investigations in materials science
Armin Zankel et al.
MICRON (2014)
Composite structure modeling and mechanical behavior of particle reinforced metal matrix composites
Yishi Su et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Three-Dimensional Characterization of SiC Particle-Reinforced Al Composites Using Serial Sectioning Tomography and Thermo-mechanical Finite Element Simulation
Jai Myun Jung et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
DREAM. 3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
Michael A. Groeber et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2014)
Three-dimensional chemical analysis of laser-welded NiTi-stainless steel wires using a dual-beam FIB
P. Burdet et al.
ACTA MATERIALIA (2013)
Numerical simulation of the influence of particle clustering on tensile behavior of particle-reinforced composites
A. Abedini et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
A statistics based numerical investigation on the prediction of elasto-plastic behavior of WC-Co hard metal
G. Chen et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
3-D tomography by automated in situ block face ultramicrotome imaging using an FEG-SEM to study complex corrosion protective paint coatings
Antony Trueman et al.
CORROSION SCIENCE (2013)
A new macroscopically anisotropic pressure dependent yield function for metal matrix composite based on strain gradient plasticity for the microstructure
Reza Azizi et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Finite element modelling of α particle size on the stress strain curve of near beta Ti alloy
G. Srinivasu et al.
MATERIALS & DESIGN (2013)
2D micromechanical analysis of SiC/Al metal matrix composites under tensile, shear and combined tensile/shear loads
Hai Qing
MATERIALS & DESIGN (2013)
Correlation between 2D and 3D flow curve modelling of DP steels using a microstructure-based RVE approach
A. Ramazani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The effect of a graded interphase on the mechanism of stress transfer in a fiber-reinforced composite
Yin Yao et al.
MECHANICS OF MATERIALS (2013)
Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes
S. A. Sajjadi et al.
MATERIALS & DESIGN (2012)
Microstructure and mechanical properties of SiCp/Mg-Zn-Ca composites fabricated by stir casting
X. J. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Size-dependent compression deformation behaviors of high particle content B4C/Al composites
Bin Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Thermal and mechanical properties of Al/Al2O3 composites at elevated temperatures
Pradeep Gudlur et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites
J. J. Williams et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
LIMITATION OF AVERAGE ESHELBY TENSOR AND ITS APPLICATION IN ANALYSIS OF ELLIPSE APPROXIMATION
Wennan Zou
ACTA MECHANICA SOLIDA SINICA (2011)
An incremental damage theory for micropolar composites taking account of progressive debonding and particle size effect
Yunpeng Jiang et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
Review of metal matrix composites with high thermal conductivity for thermal management applications
Xuan-hui Qu et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2011)
Damage development of Al/SiC metal matrix composite under fatigue, creep and monotonic loading conditions
A. Rutecka et al.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) (2011)
Realistic micromechanical modeling of discontinuously reinforced composites
Arun Sreeranganathan et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
Estimation of the size of the RVE for isotropic copper polycrystals by using elastic-plastic finite element homogenisation
A. Salahouelhadj et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
X-ray microtomography
Eric N. Landis et al.
MATERIALS CHARACTERIZATION (2010)
The influence of the reinforcing particle shape and interface strength on the fracture behavior of a metal matrix composite
V. A. Romanova et al.
ACTA MATERIALIA (2009)
Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy
S. Scudino et al.
ACTA MATERIALIA (2009)
Parametric finite-volume micromechanics of periodic materials with elastoplastic phases
Hamed Khatam et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Ultramicrotomy in the ESEM, a versatile method for materials and life sciences
A. Zankel et al.
JOURNAL OF MICROSCOPY-OXFORD (2009)
A framework for automated analysis and simulation of 3D polycrystalline micro structures. Part 2: Synthetic structure generation
Michael Groeber et al.
ACTA MATERIALIA (2008)
Nano-characterization of cast structures by FIB-tomography
Fernando Lasagni et al.
ADVANCED ENGINEERING MATERIALS (2008)
Analysis of 3D random chopped fiber reinforced composites using FEM and random sequential adsorption
Yi Pan et al.
COMPUTATIONAL MATERIALS SCIENCE (2008)
An elastoplastic three-dimensional homogenization model for particle reinforced composites
M. Galli et al.
COMPUTATIONAL MATERIALS SCIENCE (2008)
Microstructure-based finite element analysis of failure prediction in particle-reinforced metal-matrix composite
S. Balasivanandha Prabu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Block lift-out sample preparation for 3D experiments in a dual beam focused ion beam microscope
Miroslava Schaffer et al.
MICROCHIMICA ACTA (2008)
Atomic force microscope (AFM) combined with the ultramicrotome: a novel device for the serial section tomography and AFM/TEM complementary structural analysis of biological and polymer samples
Anton E. Efimov et al.
JOURNAL OF MICROSCOPY (2007)
Computational evaluation of effective material properties of composites reinforced by randomly distributed spherical particles
Sreedhar Kari et al.
COMPOSITE STRUCTURES (2007)
Functionally gradient metal matrix composites: Numerical analysis of the microstructure-strength relationships
Leon L. Mishnaevsky
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Three-dimensional visualization and micro structure-based modeling of deformation in particle-reinforced composites
N Chawla et al.
ACTA MATERIALIA (2006)
Microstructure-based modeling of the deformation behavior of particle reinforced metal matrix composites
N Chawla et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Metal matrix composites - From science to technological significance
DB Miracle
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Automatic voxel-based generation of 3D microstructural FE models and its application to the damage analysis of composites
LL Mishnaevsky
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
A computational micromechanics study of the effect of interface decohesion on the mechanical behavior of composites
J Segurado et al.
ACTA MATERIALIA (2005)
A micromechanical model for effective elastic properties of particulate composites with imperfect interfacial bonds
SH Nie et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
A continuum micromechanical theory of overall plasticity for particulate composites including particle size effect
XN Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Three-dimensional analysis of porous BaTiO3 ceramics using FIB nanotomography
L Holzer et al.
JOURNAL OF MICROSCOPY (2004)
Three-dimensional numerical testing of microstructures of particle reinforced composites
LL Mishnaevsky
ACTA MATERIALIA (2004)
Microstructure based three-dimensional finite element modeling of particulate reinforced metal-matrix composites
P Kenesei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Three-dimensional (3D) microstructure visualization and finite element modeling of the mechanical behavior of SiC particle reinforced aluminum composites
N Chawla et al.
SCRIPTA MATERIALIA (2004)
Serial block-face scanning electron microscopy to reconstruct three-dimensional tissue nanostructure
W Denk et al.
PLOS BIOLOGY (2004)
Aluminum metal-matrix composites for automotive applications: tribological considerations
SV Prasad et al.
TRIBOLOGY LETTERS (2004)
Aluminium matrix composites: Challenges and opportunities
MK Surappa
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2003)
Multi-scale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme
V Kouznetsova et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2002)
Size effects in the particle-reinforced metal-matrix composites
SH Chen et al.
ACTA MECHANICA (2002)