相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A review of natural fiber composites: properties, modification and processing techniques, characterization, applications
Aliakbar Gholampour et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Modeling of cracking during pultrusion of large-size profiles
Alexander Safonov et al.
COMPOSITE STRUCTURES (2020)
On-axis and off-axis compressive behavior of pultruded GFRP composites at elevated temperatures
Lingfeng Zhang et al.
COMPOSITE STRUCTURES (2020)
Acoustic Emission and Numerical Analysis of Pine Beams Retrofitted with FRP and Poplar Wood
Francisco J. Rescalvo et al.
MATERIALS (2020)
Marine Application of Fiber Reinforced Composites: A Review
Felice Rubino et al.
JOURNAL OF MARINE SCIENCE AND ENGINEERING (2020)
Shear characterisation of pultruded superstructural FRP-concrete push-outs
Offiong Etim et al.
STRUCTURES (2020)
Experimental and finite element analysis of push-out shear test for adhesive joints between pultruded GFRP and concrete
Ibrahim Alachek et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
Flexural behavior of timber beams strengthened with pultruded glass fiber reinforced polymer profiles
Mohammad Shekarchi et al.
COMPOSITE STRUCTURES (2020)
Durability of adhesively bonded joints between pultruded GFRP adherends under hygrothermal and natural ageing
J. M. Sousa et al.
COMPOSITES PART B-ENGINEERING (2019)
Web crippling behavior of pultruded GFRP channel sections under transverse bearing load
Chao Wu et al.
COMPOSITE STRUCTURES (2019)
Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion
I. Saenz-Dominguez et al.
COMPOSITES PART B-ENGINEERING (2019)
Multi-objective optimization of pultruded composite sandwich panels for building floor rehabilitation
M. Garrido et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A review on mechanical behavior of natural fiber reinforced polymer composites and its applications
Hitesh Jariwala et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Optimization of composite material tower for offshore wind turbine structures
Kieran O'Leary et al.
RENEWABLE ENERGY (2019)
Axial Compression Behaviours of Pultruded GFRP-Wood Composite Columns
Yujun Qi et al.
SENSORS (2019)
Structural performances of pultruded GFRP emergency structures - Part 1: Experimental characterization of materials and substructure
L. Cavaleri et al.
COMPOSITE STRUCTURES (2019)
Tension-tension fatigue performances of a pultruded carbon fiber reinforced epoxy plate at elevated temperatures
Pangang Wu et al.
COMPOSITE STRUCTURES (2019)
3D topology optimization of continuous fiber-reinforced structures via natural evolution method
Alexander A. Safonov
COMPOSITE STRUCTURES (2019)
Mechanical behavior and damage monitoring of pultruded wood-cored GFRP sandwich components
Lingfeng Zhang et al.
COMPOSITE STRUCTURES (2019)
Structural performances of pultruded GFRP emergency structures - Part 2: Full-scale experimental testing
L. Cavaleri et al.
COMPOSITE STRUCTURES (2019)
Delamination formation, evaluation and suppression during drilling of composite laminates: A review
Daxi Geng et al.
COMPOSITE STRUCTURES (2019)
Meso-scale modelling and failure analysis of kenaf fiber reinforced composites under high strain rate compression loading
Sareh Aiman Hilmi Abu Seman et al.
COMPOSITES PART B-ENGINEERING (2019)
Pultruded GFRP square hollow columns with bolted sleeve joints under eccentric compression
Lei Xie et al.
COMPOSITES PART B-ENGINEERING (2019)
Probabilistic fatigue life modelling of FRP composites for construction
Martin Noel
CONSTRUCTION AND BUILDING MATERIALS (2019)
A viscoelastic model for time-dependent behavior of pultruded GFRP
Daniel Carlos Taissum Cardoso et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of different aging conditions on the shear performance of joints made between GFRP and glass with a UV absorbance coating
Tiziana Alderucci et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Shear properties and durability of GFRP reinforcement bar aged in seawater
Moyeenuddin Ahmad Sawpan
POLYMER TESTING (2019)
Phenolic resin/polyhedral oligomeric silsesquioxane (POSS) composites: Mechanical, ablative, thermal, and flame retardant properties
Yubing Dong et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
Mechanical Models, Structures, and Applications of Shape-Memory Polymers and Their Composites
Xiaozhou Xin et al.
ACTA MECHANICA SOLIDA SINICA (2019)
Dynamic characterization of an all-FRP pultruded construction
S. Castellaro et al.
COMPOSITE STRUCTURES (2019)
Static and fatigue behavior of pultruded FRP multi-bolted joints with basalt FRP and hybrid steel-FRP bolts
Diana S. E. Abdelkerim et al.
COMPOSITE STRUCTURES (2019)
Shear behavior of large-scale concrete beams reinforced with CFRP bars and handmade strip stirrups
Ye Yuan et al.
COMPOSITE STRUCTURES (2019)
Long-term durability of thermoset composites in seawater environment
Abdel-Hamid Ismail Mourad et al.
COMPOSITES PART B-ENGINEERING (2019)
The fatigue of carbon fibre reinforced plastics - A review
Parvez Alam et al.
COMPOSITES PART B-ENGINEERING (2019)
Investigation of transverse residual stresses in a thick pultruded composite using digital image correlation with hole drilling
Onur Yuksel et al.
COMPOSITE STRUCTURES (2019)
Experimental and computational modeling of effective flexural/tensile properties of microwave pyrolysis biochar reinforced GFRP biocomposites
Chase A. Wallace et al.
COMPOSITES PART B-ENGINEERING (2019)
Development of lightweight emergency bridge using GFRP-metal composite plate-truss girder
Dongdong Zhang et al.
ENGINEERING STRUCTURES (2019)
Experimental and finite element analysis of the long-term behaviour of GFRP-concrete hybrid beams fabricated using adhesive bonding
Ibrahim Alachek et al.
COMPOSITE STRUCTURES (2019)
Static and fatigue load performance of a pultruded GFRP deck panel reinforced with steel wires
Hyeong-Yeol Kim et al.
COMPOSITE STRUCTURES (2019)
Numerical failure analysis of built-up columns composed of closely spaced pultruded FRP channels
Fabio Minghini et al.
COMPOSITE STRUCTURES (2019)
Damage sensing, mechanical and interfacial properties of resins suitable for new CFRP rope for elevator applications
Dong-Jun Kwon et al.
COMPOSITES PART B-ENGINEERING (2019)
Shear behavior of concrete beams reinforced with CFRP sheet strip stirrups using wet-layup technique
Muhammad Tahir et al.
STRUCTURES (2019)
Mathematical simulation of pultrusion processes: A review
Alexander A. Safonov et al.
COMPOSITE STRUCTURES (2018)
Effect of the manufacturing process on the energy absorption capability of GFRP crush structures
A. Esnaola et al.
COMPOSITE STRUCTURES (2018)
Flexural moduli and end connection stiffnesses of symmetrically loaded GFRP beams for limit state serviceability design analysis
G. J. Turvey et al.
COMPOSITE STRUCTURES (2018)
X-ray computed tomography characterization of manufacturing induced defects in a glass/polyester pultruded profile
Ismet Baran et al.
COMPOSITE STRUCTURES (2018)
Mechanical performance of two-way modular FRP sandwich slabs
Sindu Satasivam et al.
COMPOSITE STRUCTURES (2018)
Fatigue of flax-epoxy and other plant fibre composites: Critical review and analysis
Zia Mahboob et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Experimental fatigue behavior of pultruded glass fibre reinforced polymer composite materials
Priscilla Rocha Vieira et al.
COMPOSITES PART B-ENGINEERING (2018)
Mechanical characterization of pultruded elements: Fiber orientation influence vs web-flange junction local problem. Experimental and numerical tests
Attilio Quadrino et al.
COMPOSITES PART B-ENGINEERING (2018)
A novel methodology for shear cohesive law identification of bonded reinforcements
M. Perrella et al.
COMPOSITES PART B-ENGINEERING (2018)
Weldability of thermoplastic materials for friction stir welding- A state of art review and future applications
Ranvijay Kumar et al.
COMPOSITES PART B-ENGINEERING (2018)
Strain rate studies of pultruded glass fibre reinforced polymer material properties: A literature review
Shaohua Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical properties of pultruded basalt fiber-reinforced polymer tube under axial tension and compression
Lining Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Characterization and properties of natural fiber polymer composites: A comprehensive review
M. R. Sanjay et al.
JOURNAL OF CLEANER PRODUCTION (2018)
A systematic literature review on less common natural fibres and their biocomposites
E. Sarasini et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Shear Behavior of GFRP Composite Materials at Elevated Temperature
I. C. Rosa et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)
Flexural and web crippling properties of GFRP pultruded profiles subjected to wetting and drying cycles in different sea water conditions
Asghar Vatani Oskouei et al.
POLYMER TESTING (2018)
Influence of fibre orientation on pultruded GFRP material properties
Shaohua Zhang et al.
COMPOSITE STRUCTURES (2018)
Short-term flexural behaviour of concrete filled pultruded GFRP cellular and tubular sections with pin-eye connections for modular retaining wall construction
Wahid Ferdous et al.
COMPOSITE STRUCTURES (2018)
A study on the energy absorption capacity of braided rod composites
Yuqiu Yang et al.
COMPOSITE STRUCTURES (2018)
Two-matrix composites: Carbon fiber micropultrusions embedded in flexible epoxy matrices
Sebastien J. P. Callens et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Multi-scale digital image correlation for detection and quantification of matrix cracks in carbon fiber composite laminates in the absence and presence of voids controlled by the cure cycle
Mahoor Mehdikhani et al.
COMPOSITES PART B-ENGINEERING (2018)
Mechanical Properties and Wear Behavior of a Novel Composite of Acrylonitrile-Butadiene-Styrene Strengthened by Short Basalt Fiber
Mohammed Y. Abdellah et al.
JOURNAL OF COMPOSITES SCIENCE (2018)
Flexural behaviour of glass fibre-reinforced polymer and ultra-high-strength fibre-reinforced concrete composite beams subjected to elevated temperature
Isuru Sanjaya Kumara Wijayawardane et al.
ADVANCES IN STRUCTURAL ENGINEERING (2017)
The effects of nano-silica/nano-alumina on fatigue behavior of glass fiber-reinforced epoxy composites
A. Fathy et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Rotational stiffness of web-flange junctions of pultruded GFRP decks
Sonia Yanes-Armas et al.
ENGINEERING STRUCTURES (2017)
Composite actions within steel-FRP composite beam systems with novel blind bolt shear connections
Sindu Satasivam et al.
ENGINEERING STRUCTURES (2017)
Experimental and numerical study of the torsional response of a modular hybrid FRP-aluminum triangular deck-truss beam
Dongdong Zhang et al.
ENGINEERING STRUCTURES (2017)
A review on the manufacturing defects of complex-shaped laminate in aircraft composite structures
M. H. Hassan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Improving shear strength of bolted joints in pultruded glass fiber reinforced polymer composites using carbon nanotubes
Moneeb Genedy et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Intelligent materials: a review of applications in 4D printing
Xin Li et al.
ASSEMBLY AUTOMATION (2017)
Experimental investigation of CFRP-strengthened steel beams with web openings
Mohammed J. Altaee et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)
Creep and creep buckling of pultruded glass-reinforced polymer members
Kent A. Harries et al.
COMPOSITE STRUCTURES (2017)
Analytical and experimental evaluation of flexural behavior of FRP pultruded composite profiles for bridge deck structural design
Haohui Xin et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Experimental and numerical investigation on in-plane compression and shear performance of a pultruded GFRP composite bridge deck
Haohui Xin et al.
COMPOSITE STRUCTURES (2017)
Composite-Friendly Approach to Certification of Advanced Materials and Fabrication Methods used in Aviation Industry
S. V. Dubinskii et al.
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY (2017)
Experimental and numerical evaluation of the axial stiffness of the webto-flange adhesive connections in composite I-beams
Francesco Ascione et al.
COMPOSITE STRUCTURES (2017)
Impact response of pedestrian bridge multicellular pultruded GFRP deck panels
L. S. Sutherland et al.
COMPOSITE STRUCTURES (2017)
Design Otimization of Tuss Bidge Sructures of Cmposite Mterials
D. V. Tinkov et al.
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY (2017)
Hygrothermal aging effects on shear behavior of pultruded FRP composite web-flange junctions in bridge application
Haohui Xin et al.
COMPOSITES PART B-ENGINEERING (2017)
A REVIEW ON BUCKLING COLLAPSES OF SIMPLE AND COMPLEX COLUMNS MADE FROM PULTRUDED FRP MATERIAL
Salvatore Russo
COMPOSITES-MECHANICS COMPUTATIONS APPLICATIONS (2017)
A review on physico-mechanical properties of bast fibre reinforced polymer composites
A. V. Kiruthika
JOURNAL OF BUILDING ENGINEERING (2017)
Axial load-bending moment diagrams of GFRP reinforced columns and GFRP encased square columns
Jim Youssef et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Strength and stiffness of adhesively bonded GFRP beam-column moment resisting connections
F. Ascione et al.
COMPOSITE STRUCTURES (2017)
Compressive behavior of non-slender hollow GFRP structural shapes in thermomechanical loading
Yail J. Kim et al.
COMPOSITE STRUCTURES (2017)
Evaluation of continuous filament mat influence on the bending behaviour of GFRP pultruded material via Electronic Speckle Pattern Interferometry
Salvatore Benfratello et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2017)
Flexural behaviour of multi-celled GFRP composite beams with concrete infill: Experiment and theoretical analysis
Majid Muttashar et al.
COMPOSITE STRUCTURES (2017)
Influence of micro and nanofillers on mechanical properties of pultruded unidirectional glass fiber reinforced epoxy composite systems
M. Manjunath et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Mechanical performance of modular FRP-steel composite beams for building construction
Sindu Satasivam et al.
MATERIALS AND STRUCTURES (2016)
Strength Analysis and Process Simulation of Subway Contact Rail Support Bracket of Composite Materials
Boris N. Fedulov et al.
APPLIED COMPOSITE MATERIALS (2016)
Energy dissipation and recovery in web-flange junctions of pultruded GFRP decks
Sonia Yanes-Armas et al.
COMPOSITE STRUCTURES (2016)
Effect of geometric discontinuities on failure of pultruded GFRP columns in axial compression
Yail J. Kim et al.
COMPOSITE STRUCTURES (2016)
CFRP stiffened GFRP continuous beams - A simple closed-form analysis and its experimental verification for serviceability limit deformations
G. J. Turvey
COMPOSITE STRUCTURES (2016)
Perforated FRP ribs for shear connecting of FRP-concrete hybrid beams/decks
XingXing Zou et al.
COMPOSITE STRUCTURES (2016)
Progressive damage analysis of PFRP double-lap bolted joints using explicit finite element method
Ao Du et al.
COMPOSITE STRUCTURES (2016)
Dynamic and fatigue performances of a large-scale space frame assembled using pultruded GFRP composites
Xiao Yang et al.
COMPOSITE STRUCTURES (2016)
Structural behaviour of hybrid FRP pultruded columns. Part 1: Experimental study
Francisco Nunes et al.
COMPOSITE STRUCTURES (2016)
The effect of process parameters on ultraviolet cured out of die bent pultrusion process
I. Tena et al.
COMPOSITES PART B-ENGINEERING (2016)
A closed-form equation for the local buckling moment of pultruded FRP I-beams in major-axis bending
Francesco Ascione et al.
COMPOSITES PART B-ENGINEERING (2016)
Response of pultruded glass composite box beams under bending and shear
Daniel D. Estep et al.
COMPOSITES PART B-ENGINEERING (2016)
Flexural creep response of pultruded GFRP deck panels: Proposal for obtaining full-section viscoelastic moduli and creep coefficients
Mario F. Sa et al.
COMPOSITES PART B-ENGINEERING (2016)
Composite piles: A review
Kujtim Zyka et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Hygrothermal aging effects on flexural behavior of pultruded glass fiber reinforced polymer laminates in bridge applications
Haohui Xin et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
System transverse in-plane shear stiffness of pultruded GFRP bridge decks
Sonia Yanes-Armas et al.
ENGINEERING STRUCTURES (2016)
Shape-memory polymers for multiple applications in the materials world
Florence Pilate et al.
EUROPEAN POLYMER JOURNAL (2016)
Thermoset shape memory polymers and their composites
Fang Xie et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2016)
Tensile properties and color and mass variations of GFPR composites under alkaline and ultraviolet exposures
Guilherme Chagas Cordeiro et al.
MATERIA-RIO DE JANEIRO (2016)
Epoxy Resin Composite Reinforced with Carbon Fiber and Inorganic Filler: Overview on Preparation and Properties
Irum Rafique et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2016)
Progressive damage modeling of spiral and ring composite structures for offloading hoses
Maikson L. P. Tonatto et al.
MATERIALS & DESIGN (2016)
Reinforced Concrete Beams Strengthened with NSM CFRP Rods in Shear
Firas Al-Mahmoud et al.
ADVANCES IN STRUCTURAL ENGINEERING (2015)
Shear and Local Effects in All-FRP Bolted Built-Up Columns
S. Russo
ADVANCES IN STRUCTURAL ENGINEERING (2015)
On the flexural behaviour of GFRP beams obtained by bonding simple panels: An experimental investigation
Francesco Ascione et al.
COMPOSITE STRUCTURES (2015)
Modifications of standard GFRP sections shape and proportions for improved stiffness and lateral-torsional stability
Francesco Ascione et al.
COMPOSITE STRUCTURES (2015)
Analytical procedure for the design of PFRP-RC hybrid beams including shear interaction effects
Catalin A. Neagoe et al.
COMPOSITE STRUCTURES (2015)
Experimental investigation of the load-deformation behaviour of pultruded GFRP modular and custom safety barriers
Geoffrey Turvey
COMPOSITE STRUCTURES (2015)
Flexural behaviour of pultruded glass fibre reinforced polymer composite beams with bolted splice joints
Geoffrey John Turvey et al.
COMPOSITE STRUCTURES (2015)
Performance of built-up columns made by pultruded FRP material
Giosue' Boscato et al.
COMPOSITE STRUCTURES (2015)
Long-term bending performance and service life prediction of pultruded Glass Fibre Reinforced Polymer composites
Guglielmo Carra et al.
COMPOSITE STRUCTURES (2015)
Structural performance of a large-scale space frame assembled using pultruded GFRP composites
Xiao Yang et al.
COMPOSITE STRUCTURES (2015)
Effects of exposure to elevated temperatures and subsequent immersion in water or alkaline solution on the mechanical properties of pultruded BFRP plates
Zhongyu Lu et al.
COMPOSITES PART B-ENGINEERING (2015)
Effect of geometric parameters on the mechanical behavior of PFRP single bolted connection
Young-Geun Lee et al.
COMPOSITES PART B-ENGINEERING (2015)
Out of die ultraviolet cured pultrusion for automotive crash structures
I. Tena et al.
COMPOSITES PART B-ENGINEERING (2015)
Flexural performance of hybrid beams made of glass and pultruded GFRP
E. Speranzini et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Flame Retardant Polymer Composites
Mahadev Bar et al.
FIBERS AND POLYMERS (2015)
Comparative Study on Static and Fatigue Performances of Pultruded GFRP Joints Using Ordinary and Blind Bolts
Chao Wu et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)
Bucklings interactions in columns made by built-up thin, open, pultruded FRP shapes
Salvatore Russo
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic Properties
Furqan Ahmad et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Static, dynamic and creep behaviour of a full-scale GFRP-SFRSCC hybrid footbridge
Jose A. Gonilha et al.
COMPOSITE STRUCTURES (2014)
Performance of a lightweight GFRP composite bridge deck in positive and negative bending regions
Jiejian Zhu et al.
COMPOSITE STRUCTURES (2014)
Shear effects on bending behaviour of CFRP floor panels
Y. Gao et al.
COMPOSITE STRUCTURES (2014)
Experimental response and code modelling of continuous concrete slabs reinforced with BFRP bars
M. E. M. Mahroug et al.
COMPOSITE STRUCTURES (2014)
Influence of fatigue and aggressive exposure on GFRP girder to SFRSCC deck all-adhesive connection
Pedro J. D. Mendes et al.
COMPOSITE STRUCTURES (2014)
Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge system
Dongdong Zhang et al.
COMPOSITE STRUCTURES (2014)
Web crippling behaviour of pultruded glass fibre reinforced polymer sections
Chao Wu et al.
COMPOSITE STRUCTURES (2014)
Mechanical performance of bolted modular GFRP composite sandwich structures using standard and blind bolts
Sindu Satasivam et al.
COMPOSITE STRUCTURES (2014)
Creep tests on GFRP pultruded specimens subjected to traction or shear
Marina Bottoni et al.
COMPOSITE STRUCTURES (2014)
A novel connection for fibre reinforced polymer bridge decks: Conceptual design and experimental investigation
V. Mara et al.
COMPOSITE STRUCTURES (2014)
Influence of initial geometric imperfections in the lateral buckling problem of thin walled pultruded GFRP I-profiles
Francesco Ascione
COMPOSITE STRUCTURES (2014)
Modelling the pultrusion process of an industrial L-shaped composite profile
Ismet Baran et al.
COMPOSITE STRUCTURES (2014)
Dissipative capacity on FRP spatial pultruded structure
Giosue Boscato et al.
COMPOSITE STRUCTURES (2014)
Adhesively bonded modular GFRP web-flange sandwich for building floor construction
Sindu Satasivam et al.
COMPOSITE STRUCTURES (2014)
Delamination detection at web/flange junction of I-section composite beam with fiber optical interferometer sensor
Ying Xu
COMPOSITES PART B-ENGINEERING (2014)
Compressive strength equation for GFRP square tube columns
Daniel C. T. Cardoso et al.
COMPOSITES PART B-ENGINEERING (2014)
Structural evaluation of axial and rotational flexibility and strength of web-flange junctions of open-web pultruded composites
A. S. Mosallam et al.
COMPOSITES PART B-ENGINEERING (2014)
Blast performance of a sacrificial cladding with composite tubes for protection of civil engineering structures
W. Van Paepegem et al.
COMPOSITES PART B-ENGINEERING (2014)
Torsional response of closed FRP composite sections
Muhammad Asif M. Qureshi et al.
COMPOSITES PART B-ENGINEERING (2014)
An experimental study on flexural behavior for a FRP composite girder
Namshik Ahn et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Critical buckling strength prediction of pultruded glass fiber reinforced polymeric composite columns
Hota V. S. GangaRao et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Identification of the Short-Term Full-Section Moduli of Pultruded FRP Profiles Using Bending Tests
Fabio Minghini et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2014)
An advanced FRP floor panel system in buildings
Y. Gao et al.
COMPOSITE STRUCTURES (2013)
Punching shear strengthening of two-way flat slabs using CFRP rods
M. Hasan Meisami et al.
COMPOSITE STRUCTURES (2013)
Mechanical behaviour of pultruded glass fibre reinforced polymer composites at elevated temperature: Experiments and model assessment
Joao R. Correia et al.
COMPOSITE STRUCTURES (2013)
Mixed-mode fatigue failure criteria for adhesively-bonded pultruded GFRP joints
Moslem Shahverdi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Mechanical behavior of web-flange junctions of thin-walled pultruded I-profiles: An experimental and numerical evaluation
Luciano Feo et al.
COMPOSITES PART B-ENGINEERING (2013)
Non-linear pre-buckling behavior of shear deformable thin-walled composite beams with open cross-section
Geminiano Mancusi et al.
COMPOSITES PART B-ENGINEERING (2013)
Positive and negative moment behaviours of hybrid members comprising cellular GFRP bridge decking epoxy-bonded to reinforced concrete beams
Wendel Sebastian et al.
COMPOSITES PART B-ENGINEERING (2013)
Postbuckling failure analysis of pultruded FRP beams under uniform bending
Ferdinando Laudiero et al.
COMPOSITES PART B-ENGINEERING (2013)
Response of pultruded composite tubes subjected to dynamic and impulsive axial loading
D. Kakogiannis et al.
COMPOSITES PART B-ENGINEERING (2013)
The influence of the web-flange junction stiffness on the mechanical behaviour of thin-walled pultruded beams
Francesco Ascione et al.
COMPOSITES PART B-ENGINEERING (2013)
Flexural strengthening of concrete beams with EB-FRP, SRP and SRCM: Experimental investigation
Alberto Balsamo et al.
COMPOSITES PART B-ENGINEERING (2013)
Creep response of GFRP-concrete hybrid structures: Application to a footbridge prototype
Jose A. Gonilha et al.
COMPOSITES PART B-ENGINEERING (2013)
Process induced residual stresses and distortions in pultrusion
Ismet Baran et al.
COMPOSITES PART B-ENGINEERING (2013)
Low-cost glass fiber composites with enhanced alkali resistance tailored towards concrete reinforcement
Mohammad Sayyar et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Block loading fatigue of adhesively bonded pultruded GFRP joints
Roohollah Sarfaraz et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Variable amplitude fatigue of adhesively-bonded pultruded GFRP joints
Roohollah Sarfaraz et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Fatigue equation considerations for the American Society of Civil Engineers pre-standard for load and resistance factor design of pultruded fiber-reinforced polymer structures
David B. Dittenber et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
The influence of the shear deformations on the local stress state of pultruded composite profiles
Luciano Feo et al.
MECHANICS RESEARCH COMMUNICATIONS (2013)
A review of stimuli-responsive shape memory polymer composites
Harper Meng et al.
POLYMER (2013)
Experimental and numerical study on the structural behavior of eccentrically loaded GFRP columns
F. Nunes et al.
THIN-WALLED STRUCTURES (2013)
Design Optimization of a 5 MW Floating Offshore Vertical-Axis Wind Turbine
Uwe Schmidt Paulsen et al.
DEEPWIND'2013 - SELECTED PAPERS FROM 10TH DEEP SEA OFFSHORE WIND R&D CONFERENCE (2013)
Punching Shear Failure in Double-Layer Pultruded FRP Grid Reinforced Concrete Bridge Decks
Jeffrey J. Brunton et al.
ADVANCES IN STRUCTURAL ENGINEERING (2012)
Time-dependent and residual behavior of pultruded GFRP beams subjected to sustained intensities and cold temperature
Fuad Khan et al.
COLD REGIONS SCIENCE AND TECHNOLOGY (2012)
Mechanical properties of pultruded glass fiber-reinforced plastic after moistening
K. Aniskevich et al.
COMPOSITE STRUCTURES (2012)
On the effect of geometrical designs and failure modes in composite axial crushing: A literature review
Saijod T. W. Lau et al.
COMPOSITE STRUCTURES (2012)
A review on the driving performance of FRP composite piles
Ernesto Guades et al.
COMPOSITE STRUCTURES (2012)
Durability characteristics of nano-GFRP composite reinforcing bars for concrete structures in moist and alkaline environments
Jong-Pil Won et al.
COMPOSITE STRUCTURES (2012)
A total fatigue life model for the prediction of the R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints
Moslem Shahverdi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Experimental investigation of R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints under CA loading
Moslem Shahverdi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Load response due to local and global indeterminacies of FRP-deck bridges
W. M. Sebastian et al.
COMPOSITES PART B-ENGINEERING (2012)
Load and resistance factor design of fiber reinforced polymer composite bridge deck
Lisa King et al.
COMPOSITES PART B-ENGINEERING (2012)
Advanced composite sandwich structure design for energy absorption applications: Blast protection and crashworthiness
F. Tarlochan et al.
COMPOSITES PART B-ENGINEERING (2012)
Experimental investigation and modeling of mean load effect on fatigue behavior of adhesively-bonded pultruded GFRP joints
Roohollah Sarfaraz et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Stimulus-responsive shape memory materials: A review
L. Sun et al.
MATERIALS & DESIGN (2012)
Mechanical Properties of Kevlar-49 Fibre Reinforced Thermoplastic Composites
K. K. Herbert Yeung et al.
POLYMERS & POLYMER COMPOSITES (2012)
Determination of the Shear Buckling Load of a Large Polymer Composite I-Section Using Strain and Displacement Sensors
Jin Y. Park et al.
SENSORS (2012)
A comparative study on fatigue behaviour of steel beams retrofitted with welding, pultruded CFRP plates and wet layup CFRP sheets
Hui Jiao et al.
THIN-WALLED STRUCTURES (2012)
Ultimate strength of a GFRP deck panel for temporary structures
Hyeong-Yeol Kim et al.
COMPOSITE STRUCTURES (2011)
Structural performance of composite sandwich bridge decks with hybrid GFRP-steel core
Hyo-Seon Ji et al.
COMPOSITE STRUCTURES (2011)
Evaluation of effective flange width by shear lag model for orthotropic FRP bridge decks
Bin Zou et al.
COMPOSITE STRUCTURES (2011)
Creep behavior of pultruded GFRP elements - Part 1: Literature review and experimental study
Mario F. Sa et al.
COMPOSITE STRUCTURES (2011)
Creep behavior of pultruded GFRP elements - Part 2: Analytical study
Mario F. Sa et al.
COMPOSITE STRUCTURES (2011)
Development of a pedestrian bridge with GFRP profiles and fiber reinforced self-compacting concrete deck
Pedro J. D. Mendes et al.
COMPOSITE STRUCTURES (2011)
Mechanical characterisation of basalt fibre reinforced plastic
V. Lopresto et al.
COMPOSITES PART B-ENGINEERING (2011)
First-order, buckling and post-buckling behaviour of GFRP pultruded beams. Part 1: Experimental study
J. R. Correia et al.
COMPUTERS & STRUCTURES (2011)
Use of a single lap shear test to characterize composite-to-concrete or composite-to-steel bonded interfaces
Sylvain Chataigner et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Experimental investigation of the fatigue behavior of adhesively-bonded pultruded GFRP joints under different load ratios
Roohollah Sarfaraz et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Dynamic Response of a Sheet Pile of Fiber-Reinforced Polymer for Waterfront Barriers
Giosue Boscato et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2011)
Behavior of Pultruded Fiber-Reinforced Polymer Beams Subjected to Concentrated Loads in the Plane of the Web
David T. Borowicz et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2011)
Fire Performance of Water-Cooled GFRP Columns. I: Fire Endurance Investigation
Yu Bai et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2011)
Stiffness and Strength Evaluations of a Shear Connection System for FRP Bridge Decks to Steel Girders
Julio F. Davalos et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2011)
Mathematical Description of the Technological Process of Injection Pultrusion
A. A. Safonov
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY (2011)
Mathematical Modeling of Polymerization in the Manufacturing of Polymeric Composite Materials
A. A. Safonov et al.
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY (2011)
Experimental and numerical analysis of a bus component in composite material
C. Colombo et al.
COMPOSITE STRUCTURES (2010)
Fatigue of composite materials under spectrum loading
Christos Kassapoglou
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Static and fatigue bending behavior of pultruded GFRP sandwich panels with through-thickness fiber insertions
M. Dawood et al.
COMPOSITES PART B-ENGINEERING (2010)
Fire protection systems for building floors made of pultruded GFRP profiles - Part 2: Modeling of thermomechanical responses
Yu Bai et al.
COMPOSITES PART B-ENGINEERING (2010)
Fire protection systems for building floors made of pultruded GFRP profiles Part 1: Experimental investigations
Joao R. Correia et al.
COMPOSITES PART B-ENGINEERING (2010)
A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties
L. C. Hollaway
CONSTRUCTION AND BUILDING MATERIALS (2010)
Vibration analysis of pultruded FRP frames with semi-rigid connections
F. Minghini et al.
ENGINEERING STRUCTURES (2010)
Fracture of adhesively-bonded pultruded GFRP joints under constant amplitude fatigue loading
Ye Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Piecewise non-linear constant life diagram formulation for FRP composite materials
Anastasios P. Vassilopoulos et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Influence of the constant life diagram formulation on the fatigue life prediction of composite materials
Anastasios P. Vassilopoulos et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Mechanical Properties of Flax Fibers and of the Derived Unidirectional Composites
Karine Charlet et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Prediction of Net-Tension Strength for Multirow Bolted Connections of Pultruded Material Using the Hart-Smith Semiempirical Modeling Approach
J. T. Mottram
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)
LRFD Factors for Pultruded Wide-Flange Columns
Linda M. Vanevenhoven et al.
JOURNAL OF STRUCTURAL ENGINEERING (2010)
Experimental study on the axial crushing behaviour of pultruded composite tubes
Sivakumar Palanivelu et al.
POLYMER TESTING (2010)
Pecularities of Using Carbon Glass-Reinforced Plastic in Pultrusion Composite Profiles for Bridge Engineering
T. G. Sorina et al.
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY (2010)
Pultruded GFRP tubes with liquid-cooling system under combined temperature and compressive loading
Yu Bai et al.
COMPOSITE STRUCTURES (2009)
Modeling of through-thickness stress state in adhesive joints connecting pultruded FRP bridge decks and steel girders
Martin Schollmayer et al.
COMPOSITE STRUCTURES (2009)
A pultruded GFRP deck panel for temporary structures
Hyeong-Yeol Kim et al.
COMPOSITE STRUCTURES (2009)
Through-thickness performance of adhesive Joints between FRP bridge decks and steel girders
Thomas Keller et al.
COMPOSITE STRUCTURES (2009)
Analytical verification of a composite level of bolted GFRP bridge deck-to-girder connection system
K. T. Park
COMPOSITE STRUCTURES (2009)
Delamination of pultruded glass fiber-reinforced polymer composites subjected to axial compression
Yu Bai et al.
COMPOSITE STRUCTURES (2009)
Experimental assessment of energy absorption capability of carbon-epoxy and glass-epoxy composites
Stanislaw Ochelski et al.
COMPOSITE STRUCTURES (2009)
Fatigue behavior of the foam-filled GFRP bridge deck
Do Young Moon et al.
COMPOSITES PART B-ENGINEERING (2009)
Mechanical repair of timber beams fractured in flexure using bonded-in reinforcements
Parvez Alam et al.
COMPOSITES PART B-ENGINEERING (2009)
Flexural behavior of prestressed FRP tubular bridge deck
Zhenhua Wu et al.
COMPOSITES PART B-ENGINEERING (2009)
Environmental effects on fatigue behavior of adhesively-bonded pultruded structural joints
Ye Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Study of strengthening solutions for glued-laminated wood beams of maritime pine wood
Alfredo S. Ribeiro et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Elastic buckling analysis of pultruded FRP portal frames having semi-rigid connections
Fabio Minghini et al.
ENGINEERING STRUCTURES (2009)
Blast testing of ultra-high performance fibre and FRP-retrofitted concrete slabs
C. Wu et al.
ENGINEERING STRUCTURES (2009)
Flexural behaviour of multi-span GFRP-concrete hybrid beams
Joao R. Correia et al.
ENGINEERING STRUCTURES (2009)
An experimental study on mechanical properties of GFRP braid-pultruded composite rods
M. S. Ahmadi et al.
EXPRESS POLYMER LETTERS (2009)
Preclinical Evaluation of a Novel Fiber Compound MR Guidewire In Vivo
Nils A. Krämer et al.
INVESTIGATIVE RADIOLOGY (2009)
Interaction between Local and Lateral Buckling on Pultruded I-Beams
A. Insausti et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2009)
Novel Technique for Inhibiting Buckling of Thin-Walled Steel Structures Using Pultruded Glass FRP Sections
Ayman M. Okeil et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2009)
Shear Failure of Pultruded Fiber-Reinforced Polymer Composites under Axial Compression
Yu Bai et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2009)
Vibration analysis with second-order effects of pultruded FRP frames using locking-free elements
F. Minghini et al.
THIN-WALLED STRUCTURES (2009)
Optimization of the Pultrusion Process for a Rod with a Large Diameter
A. A. Safonov et al.
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY (2009)
An analytical model for the flexural response of a fiber reinforced plastic deck using higher-order shear deformable plate theory
Youngbin Kim et al.
COMPOSITE STRUCTURES (2008)
The static behavior of a modular foam-filled GFRP bridge deck with a strong web-flange joint
Goangseup Zi et al.
COMPOSITE STRUCTURES (2008)
Modal parameter identification for a GFRP pedestrian bridge
Yu Bai et al.
COMPOSITE STRUCTURES (2008)
Analysis of stress concentration during tension of round pultruded composite rods
G. Portnov et al.
COMPOSITE STRUCTURES (2008)
An experimental study on static behavior of a GFRP bridge deck filled with a polyurethane foam
Goangseup Zi et al.
COMPOSITE STRUCTURES (2008)
Ductile double-lap joints from brittle GFRP laminates and ductile adhesives, Part I: Experimental investigation
Julia de Castro et al.
COMPOSITES PART B-ENGINEERING (2008)
An experimental study on the long-term behavior of CFRP pultruded laminates suitable to concrete structures rehabilitation
F. Ascione et al.
COMPOSITES PART B-ENGINEERING (2008)
Stiffness degradation and fatigue life prediction of adhesively-bonded joints for fiber-reinforced polymer composites
Ye Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Deflection response of glass fiber-reinforced pultruded components in hot weather climates
Murat Engindeniz et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2008)
An MR Guidewire Based on Micropultruded Fiber-Reinforced Material
Sascha Krueger et al.
MAGNETIC RESONANCE IN MEDICINE (2008)
Buckling analysis of FRP pultruded frames using locking-free finite elements
F. Minghini et al.
THIN-WALLED STRUCTURES (2008)
Field and laboratory performance of a rectangular shaped glass fiber reinforced polymer deck
Jinwoo Jeong et al.
COMPOSITE STRUCTURES (2007)
An experimental study of pultruded glass fibre reinforced plastics channel columns at elevated temperatures
P. M. H. Wong et al.
COMPOSITE STRUCTURES (2007)
Flexural stiffness characterization of fiber reinforced plastic (FRP) pultruded beams
Almir Barros da S. Santos Neto et al.
COMPOSITE STRUCTURES (2007)
Performance verification of a new pultruded GFRP bridge deck-to-girder connection system
Ki-Tae Park et al.
COMPOSITE STRUCTURES (2007)
Experimental characterization of a pultruded GFRP bridge deck for light-weight vehicles
Jaehong Lee et al.
COMPOSITE STRUCTURES (2007)
Hybrid effect on tensile properties of FRP rods with various material compositions
Young-Jun You et al.
COMPOSITE STRUCTURES (2007)
Long-term compression performance of a pultruded GFRP element exposed to concrete pore water solution
Florian Riebell et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2007)
Detection of subsurface defects in fiber reinforced polymer composite bridge decks using digital infrared thermography
Udaya B. Halabe et al.
NONDESTRUCTIVE TESTING AND EVALUATION (2007)
Thermal preconditioning study for bolted tension joints in pultruded GRP plate
G. J. Turvey et al.
COMPOSITE STRUCTURES (2007)
Failure of pultruded GRP single-bolt tension joints under hot-wet conditions
G. J. Turvey et al.
COMPOSITE STRUCTURES (2007)
Flexural behaviour of GFRP-concrete hybrid beams with interconnection slip
Joao R. Correia et al.
COMPOSITE STRUCTURES (2007)
Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures
Yi Chen et al.
COMPOSITE STRUCTURES (2007)
Long-term performance of a glass fiber-reinforced polymer truss bridge
Thomas Keller et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2007)
Shear creep of epoxy at the concrete-FRP interfaces
Kyoung-Kyu Choi et al.
COMPOSITES PART B-ENGINEERING (2007)
Nonlinear constant fatigue life diagrams for carbon/epoxy laminates at room temperature
M. Kawai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Flexural behavior of a hybrid FRP and lightweight concrete sandwich bridge deck
Thomas Keller et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Numerical simulations of the mechanical characteristics of glass fibre reinforced C-profiles
C. Dispenza et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Moment capacities and deflection limits of PFRP sheet piles
Yixin Shao et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2006)
Buckling of GFRP columns: An empirical approach to design
I. Puente et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2006)
Stress analysis of finger joints in pultruded GRP materials
SW Boyd et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2006)
Modeling the remaining strength of structural composite materials subjected to fatigue
Nathan L. Post et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Pultrusion manufacturing process development by computational modelling and methods
P. Carlone et al.
MATHEMATICAL AND COMPUTER MODELLING (2006)
A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns
G. J. Turvey et al.
COMPUTERS & STRUCTURES (2006)
Characterization of Unistrut connection method with pultruded fiber-reinforced polymer channels
M. C. Evernden et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2006)
Durability of pultruded glass-fiber-reinforced polyester profiles for structural applications
J. R. Correia et al.
MECHANICS OF COMPOSITE MATERIALS (2006)
Shear failure strength of web-flange junctions in pultruded GRP WF profiles
GJ Turvey et al.
CONSTRUCTION AND BUILDING MATERIALS (2006)
In-plane compression and shear performance of FRP bridge decks acting as top chord of bridge girders
T Keller et al.
COMPOSITE STRUCTURES (2006)
Vertical shear interaction model between external FRP transverse plates and internal steel stirrups
MSM Ali et al.
ENGINEERING STRUCTURES (2006)
Adhesively bonded lap joints from pultruded GFRP profiles. Part III: Effects of chamfers
T Vallee et al.
COMPOSITES PART B-ENGINEERING (2006)
An experimental, analytical and numerical study of the static behavior of steel beams reinforced by pultruded CFRP strips
P Colombi et al.
COMPOSITES PART B-ENGINEERING (2006)
Fatigue life prediction of pultruded E-glass/polyurethane composites
Pizhong Qiao et al.
JOURNAL OF COMPOSITE MATERIALS (2006)
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests
GJ Turvey et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Fatigue behavior of adhesively bonded joints composed of pultruded GFRP adherends for civil infrastructure applications
Thomas Keller et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Pilot test on a developed GFRP bridge deck
KT Park et al.
COMPOSITE STRUCTURES (2005)
On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental
AG Mamalis et al.
COMPOSITE STRUCTURES (2005)
Composite action and adhesive bond between fiber-reinforced polymer bridge decks and main girders
T Keller et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2005)
Interface characteristics and laboratory constructability tests of novel fiber-reinforced polymer/concrete piles
M Sakr et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2005)
Flexural-torsional buckling of fiber-reinforced plastic composite open channel beams
LY Shan et al.
COMPOSITE STRUCTURES (2005)
Effect of filler and void content on mechanical properties of pultruded composite materials under shear loading
JY Park et al.
POLYMER COMPOSITES (2005)
Tensile fatigue performance of pultruded glass fiber reinforced polymer profiles
T Keller et al.
COMPOSITE STRUCTURES (2005)
Fiber reinforced plastic deck profile for I-girder bridges
HY Kim et al.
COMPOSITE STRUCTURES (2005)
Effectiveness of CFRP strengthening on curved soffit RC beams
N Eshwar et al.
ADVANCES IN STRUCTURAL ENGINEERING (2005)
Tensile characterization of glass FRP bars
S Kocaoz et al.
COMPOSITES PART B-ENGINEERING (2005)
Adhesively bonded lap joints from pultruded GFRP profiles. Part I: stress-strain analysis and failure modes
T Keller et al.
COMPOSITES PART B-ENGINEERING (2005)
Adhesively bonded lap joints from pultruded GFRP profiles. Part II: joint strength prediction
T Keller et al.
COMPOSITES PART B-ENGINEERING (2005)
Composite rebars shape effect in reinforced structures
F Kadioglu et al.
COMPOSITE STRUCTURES (2005)
Shear modulus of standard pultruded fiber reinforced plastic material
JT Mottram
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2004)
Structural performance of a FRP bridge deck
P Kumar et al.
CONSTRUCTION AND BUILDING MATERIALS (2004)
Deflection creep of pultruded composite sheet piling
YX Shao et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2004)
Adhesively bonded and translucent glass fiber reinforced polymer sandwich girders
T Keller et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2004)
Fatigue behavior of adhesively connected pultruded GFRP profiles
T Keller et al.
COMPOSITE STRUCTURES (2004)
Progressive tearing failure in pultruded composite material tubes
S Charoenphan et al.
COMPOSITE STRUCTURES (2004)
Plate bending behavior of a pultruded GFRP bridge deck system
T Keller et al.
COMPOSITE STRUCTURES (2004)
Close look at construction issues and performance of four fiber-reinforced polymer composite bridge decks
RMW Reising et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2004)
In-plane shear testing of thick-section pultruded FRP composites using a modified Arcan fixture
R El-Hajjar et al.
COMPOSITES PART B-ENGINEERING (2004)
Time-dependent deformation of pultruded fiber reinforced polymer composite columns
Y Choi et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2003)
Flexure creep properties of E-glass reinforced polymers
B Abdel-Magid et al.
COMPOSITE STRUCTURES (2003)
Use of FRP composites in civil structural applications
L Van Den Einde et al.
CONSTRUCTION AND BUILDING MATERIALS (2003)
Damage development in pultruded composites for optical telecommunications cables under tensile and flexural fatigue
SN Kukureka et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure
VM Karbhari et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2003)
Bent pultrusion - a method for the manufacture of pultrudate with controlled variation in curvature
DJ Britnell et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Flexural-torsional buckling of fiber-reinforced plastic composite cantilever I-beams
PZ Qiao et al.
COMPOSITE STRUCTURES (2003)
A micromechanical constitutive framework for the nonlinear viscoelastic behavior of pultruded composite materials
RM Haj-Ali et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Flexural and shear rigidity of composite sheet piles
C Giroux et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2003)
Monitoring fungal degradation of E-glass/phenolic fiber reinforced polymer (FRP) composites used in wood reinforcement
C Tascioglu et al.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2003)
Progressive damage and nonlinear analysis of pultruded composite structures
H Kilic et al.
COMPOSITES PART B-ENGINEERING (2003)
Section properties and buckling behavior of pultruded FRP profiles
TM Roberts et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2003)
Analysis of the mechanical behavior and characterization of pultruded glass fiber-resin matrix composites
S Paciornik et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Durability of fiberglass composite sheet piles in water
YX Shao et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2002)
Influence of shear deformation on buckling of pultruded fiber reinforced plastic profiles
TM Roberts
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2002)
Creep behaviour of FRP-reinforced polymer concrete
CML Tavares et al.
COMPOSITE STRUCTURES (2002)
Fiber-reinforced polymer composites for construction-state-of-the-art review
CE Bakis et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2002)
Flexural and torsional properties of pultruded fiber reinforced plastic I-profiles
TM Roberts et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2002)
Determination of G(12) by means of the off-axis tension test. Part 1: review of gripping systems and correction factors
JC Marin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Determination of G(12) by means of the off-axis tension test. Part II: a self-consistent approach to the application of correction factors
JC Marin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Shear moduli of structural composites from torsion tests
JF Davalos et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Energy absorption of braiding pultrusion process composite rods
H Saito et al.
COMPOSITE STRUCTURES (2002)
Nonlinear behavior of pultruded FRP composites
R Haj-Ali et al.
COMPOSITES PART B-ENGINEERING (2002)
Residual performance of scarf patch-repaired pultruded shapes initially impact damaged
TJ Chotard et al.
COMPOSITE STRUCTURES (2001)
Modelling of concrete beams reinforced with FRP re-bars
AJM Ferreira et al.
COMPOSITE STRUCTURES (2001)
Influence of shear deformation on restrained torsional warping of pultruded FRP bars of open cross-section
TM Roberts et al.
THIN-WALLED STRUCTURES (2001)
Crack width evaluation in FRP reinforced concrete members
G Creazza et al.
MATERIALS AND STRUCTURES (2001)
Fibre composite bridge decks - an alternative approach
SW Davey et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Development of a pultruded composite material highway guardrail
LC Bank et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Experimental verification of buckling-mode interaction in intermediate-length composite columns
EJ Barbero et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)
Creep rupture of a GFRP composite at elevated temperatures
PK Dutta et al.
COMPUTERS & STRUCTURES (2000)
Characterization of fatigue and combined environment on durability performance of glass/vinyl ester composite for infrastructure applications
F McBagonluri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2000)
Experimental and analytical investigations on short GFRP composite compression members
ZA Hashem et al.
COMPOSITES PART B-ENGINEERING (2000)
Performance of glass fiber reinforced plastic bars as a reinforcing material for concrete structures
SH Alsayed et al.
COMPOSITES PART B-ENGINEERING (2000)
Impact response and residual performance of GRP pultruded shapes under static and fatigue loading
TJ Chotard et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
The compressive strength of highly-aligned carbon-fibre/epoxy composites produced by pultrusion
CJ Creighton et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)