相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Selective laser remelting of an additive layer manufacturing process on AlSi10Mg
Bin Liu et al.
RESULTS IN PHYSICS (2019)
Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting
Y. K. Xiao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
Bandar AlMangour et al.
COMPOSITES PART B-ENGINEERING (2019)
Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing
L. X. Xi et al.
CERAMICS INTERNATIONAL (2018)
A heat treatable TiB2/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties
P. Wang et al.
COMPOSITES PART B-ENGINEERING (2018)
Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite
Donghua Dai et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Pulsed SLM-manufactured AlSi10Mg alloy: Mechanical properties and microstructural effects of designed laser energy densities
Lin-zhi Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Corrosion Behavior of the S136 Mold Steel Fabricated by Selective Laser Melting
Shi-Feng Wen et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2018)
Surface integrity of Inconel 718 by hybrid selective laser melting and milling
D. Brown et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
In-situ formation of novel TiC-particle-reinforced 316L stainless steel bulk-form composites by selective laser melting
Bandar AlMangour et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Design Optimization of Irregular Cellular Structure for Additive Manufacturing
Guo-Hua Song et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)
Defect Formation Mechanisms in Selective Laser Melting: A Review
Bi Zhang et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)
Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility
X. P. Li et al.
ACTA MATERIALIA (2017)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Special Issue on Future Digital Design and Manufacturing: Embracing Industry 4.0 and Beyond
Qin Shengfeng et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2016)
Macrosegregation mechanism of primary silicon phase in selective laser melting hypereutectic Al - High Si alloy
Nan Kang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting
Bandar AlMangour et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4V alloys by selective laser melting
Dang Khoa Do et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
On the role of melt flow into the surface structure and porosity development during selective laser melting
Chunlei Qiu et al.
ACTA MATERIALIA (2015)
A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
X. P. Li et al.
ACTA MATERIALIA (2015)
Application of synchrotron radiation X-ray computed tomography to investigate the agglomerating behavior of TiB2 particles in aluminum
Fei Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
High-temperature wetting and interfacial interaction between liquid Al and TiB2 ceramic
L. Xi et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
Noriko Read et al.
MATERIALS & DESIGN (2015)
Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles
Lian-Yi Chen et al.
NATURE (2015)
The homogenizing of carbon nanotube dispersion in aluminium matrix nanocomposite using flake powder metallurgy and ball milling methods
F. Rikhtegar et al.
POWDER TECHNOLOGY (2015)
Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting
Dongdong Gu et al.
SCRIPTA MATERIALIA (2015)
Selective laser melting of in-situ Al4SiC4+SiC hybrid reinforced Al matrix composites: Influence of starting SiC particle size
Fei Chang et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Phase analysis and microstructure characterisation of AlSi10Mg parts produced by Selective Laser Melting
L. P. Lam et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
Metal-ceramic Bond Mechanism of the Co-Cr Alloy Denture with Original Rough Surface Produced by Selective Laser Melting
Zhang Sheng et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2014)
Microstructure and tensile behavior of hybrid nano-micro SiC reinforced iron matrix composites produced by selective laser melting
Bo Song et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties
E. O. Olakanmi
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility
G. Liu et al.
NATURE MATERIALS (2013)
Computational modeling of cast aluminum 2024 alloy matrix composites: Adapting the classical algorithms for optimal results in finding multiple optima
Mohsen Ostad Shabani et al.
POWDER TECHNOLOGY (2013)
Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
Dongdong Gu et al.
ACTA MATERIALIA (2012)
Balling behavior of stainless steel and nickel powder during selective laser melting process
Ruidi Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Distribution of TiB2 particles and its effect on the mechanical properties of A390 alloy
Pengting Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect
A. Sanaty-Zadeh
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by Selective Laser Melting (SLM): Densification, growth mechanism and wear behavior
Dongdong Gu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Studying the influence of initial powder characteristics on the properties of final parts manufactured by the selective laser melting technology A detailed study on the influence of the initial properties of various martensitic stainless steel powders on the final microstructures and mechanical properties of parts manufactured using an optimized SLM process is reported in this paper
M. Averyanova et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2011)
Effect of SiCp multimodal distribution on pitting behavior of Al/SiCp composites prepared by reactive infiltration
M. Montoya-Davila et al.
POWDER TECHNOLOGY (2009)
Crystallography of engulfed and pushed TiB2 particles in aluminium
Paul L. Schaffer et al.
SCRIPTA MATERIALIA (2007)
Consolidation phenomena in laser and powder-bed based layered manufacturing
J. -P. Kruth et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
Z Zhang et al.
SCRIPTA MATERIALIA (2006)
Balling processes during selective laser treatment of powders
NK Tolochko et al.
RAPID PROTOTYPING JOURNAL (2004)
Direct laser sintering of iron-graphite powder mixture
A Simchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)