相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Development of a servo-hydraulic system with a self-tuning fuzzy PID controller to simulate injection molding process
Chien-Jung Chen et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2021)
Two-Dimensional Iterative Learning Model Predictive Control for Batch Processes: A New State Space Model Compensation Approach
Ridong Zhang et al.
IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS (2021)
Evaluation of polymer injection molded parts via density-based magnetic levitation
Peng Zhao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Axial magnetic levitation: A high-sensitive and maneuverable density-based analysis device
Chengqian Zhang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2020)
Grey optimization of injection molding processing of plastic optical lens based on joint consideration of aberration and birefringence effects
Chao-Ming Lin et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2019)
Temperature and pressure evolution in fast heat cycle injection molding
Sara Liparoti et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Ultrasonic measurement of clamping force for injection molding machine
Peng Zhao et al.
JOURNAL OF POLYMER ENGINEERING (2019)
Injection molding process optimization of a bi-aspheric lens using hybrid artificial neural networks (ANNs) and particle swarm optimization (PSO)
R. Joseph Bensingh et al.
MEASUREMENT (2019)
A feasible, portable and convenient density measurement method for minerals via magnetic levitation
Jun Xie et al.
MEASUREMENT (2019)
Multi-objective optimization of the fiber-reinforced composite injection molding process using Taguchi method, RSM, and NSGA-II
Li Kun et al.
SIMULATION MODELLING PRACTICE AND THEORY (2019)
Magnetic projection: A novel separation method and its first application on separating mixed plastics
Xuechun Zhang et al.
WASTE MANAGEMENT (2019)
Trajectory optimization and positioning control for batch process using learning control
Yufei Ruan et al.
CONTROL ENGINEERING PRACTICE (2019)
A New Design of Predictive Functional Control Strategy for Batch Processes in the Two-Dimensional Framework
Ridong Zhang et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)
Study on Influence of Co-Injection Molding Process on Self-Reinforcing Characteristics of Self-Reinforced Polypropylene Composite via Visualization
K-Y Jiang et al.
INTERNATIONAL POLYMER PROCESSING (2019)
In-situ ultrasonic characterization of microcellular injection molding
Peng Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Design of the Linear Quadratic Structure Based Predictive Functional Control for Industrial Processes Against Partial Actuator Failures Using GA Optimization
Xiaomin Hu et al.
INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS (2019)
On-line measurement of cavity pressure during injection molding via ultrasonic investigation of tie bar
Jianfeng Zhang et al.
SENSORS AND ACTUATORS A-PHYSICAL (2019)
On-line measurement of clamping force for injection molding machine using ultrasonic technology
Yao Zhao et al.
ULTRASONICS (2019)
AI Based Injection Molding Process for Consistent Product Quality
Hong Seok Park et al.
7TH INTERNATIONAL CONFERENCE ON CHANGEABLE, AGILE, RECONFIGURABLE AND VIRTUAL PRODUCTION (CARV2018) (2019)
Experimental-Based Multi-objective Optimization of Injection Molding Process Parameters
Saad M. S. Mukras et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)
Process control strategies for injection molding processes with changing raw material viscosity
Christian Hopmann et al.
JOURNAL OF POLYMER ENGINEERING (2018)
Single-Ring Magnetic Levitation Configuration for Object Manipulation and Density-Based Measurement
Chengqian Zhang et al.
ANALYTICAL CHEMISTRY (2018)
Tunable rotating-mode density measurement using magnetic levitation
Qiu-Hua Gao et al.
APPLIED PHYSICS LETTERS (2018)
Feature learning and process monitoring of injection molding using convolution-deconvolution auto encoders
Ting Mao et al.
COMPUTERS & CHEMICAL ENGINEERING (2018)
Numerical and experimental investigation on process parameters optimization in plastic injection molding for weldlines reduction and clamping force minimization
Satoshi Kitayama et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Research on temperature and pressure responses in the rapid mold heating and cooling method based on annular cooling channels and electric heating
Guilong Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Using a Visualization Mold to Discuss the Influence of Gas Counter Pressure and Mold Temperature on the Fountain Flow Effect
W-R Jong et al.
INTERNATIONAL POLYMER PROCESSING (2018)
Feature extraction and physical interpretation of melt pressure during injection molding process
Xundao Zhou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Non-destructive measurement of three-dimensional polymeric parts by magneto-Archimedes levitation
Neng Xia et al.
POLYMER TESTING (2018)
Enlarging density measurement range for polymers by horizontal magneto-Archimedes levitation
Chengqian Zhang et al.
POLYMER TESTING (2018)
Numerical and experimental investigation of process parameters optimization in plastic injection molding using multi-criteria decision making
Satoshi Kitayama et al.
SIMULATION MODELLING PRACTICE AND THEORY (2018)
Processing of ultra-high molecular weight polyethylene/graphite composites by ultrasonic injection moulding: Taguchi optimization
Xavier Sanchez-Sanchez et al.
ULTRASONICS SONOCHEMISTRY (2018)
Separation of mixed waste plastics via magnetic levitation
Peng Zhao et al.
WASTE MANAGEMENT (2018)
Optimization of Process Parameters for Vertical-Faced Polypropylene Bottle Injection Molding
Youmin Wang et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
The simulation of the warpage rule of the thin-walled part of polypropylene composite based on the coupling effect of mold deformation and injection molding process
Jixiang Zhang et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2018)
Numerical optimization of process parameters in plastic injection molding for minimizing weldlines and clamping force using conformal cooling channel
Satoshi Kitayama et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Toward New-Generation Intelligent Manufacturing
Zhou Ji et al.
ENGINEERING (2018)
Research on the sensitivity of magnetic levitation (MagLev) devices
Jun Xie et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2018)
Defect diagnosis for polymeric samples via magnetic levitation
Neng Xia et al.
NDT & E INTERNATIONAL (2018)
Genetic-Algorithm-Optimization-Based Infinite Horizon Linear Quadratic Control for Injection Molding Batch Processes with Uncertainty
Xiaomin Hu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Multi-Objective Optimizations for Microinjection Molding Process Parameters of Biodegradable Polymer Stent
Hongxia Li et al.
MATERIALS (2018)
Multi Response optimization of injection moulding Process parameters to reduce cycle time and warpage
Gurjeet Singh et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Intelligent methods for the process parameter determination of plastic injection molding
Huang Gao et al.
FRONTIERS OF MECHANICAL ENGINEERING (2018)
Multi-objective optimization of injection molding process parameters for short cycle time and warpage reduction using conformal cooling channel
Satoshi Kitayama et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
In process quality control on micro-injection moulding: the role of sensor location
Xabier Mendibil et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Multi-objective optimization of injection molding process parameters in two stages for multiple quality characteristics and energy efficiency using Taguchi method and NSGA-II
Maosheng Tian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Warpage optimization of fiber-reinforced composite injection molding by combining back propagation neural network and genetic algorithm
Kun Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
A Comprehensive Study of Energy Conservation in Electric-Hydraulic Injection-Molding Equipment
Hongjuan Zhang et al.
ENERGIES (2017)
Multi-objective optimization of variable packing pressure profile and process parameters in plastic injection molding for minimizing warpage and cycle time
Satoshi Kitayama et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Thermal optimization of deterministic porous mold inserts for rapid heat cycle molding
Luca Crema et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Flow and Thermal History Effects on Morphology and Tensile Behavior of Poly(oxymethylene) Micro Injection Molded Parts
M. R. Kamal et al.
INTERNATIONAL POLYMER PROCESSING (2017)
Polymer Flow Behavior Analysis Based on Physical Visualization Technology for Ultrasonic Vibration-Assisted Injection Molding
K. -Y. Jiang et al.
INTERNATIONAL POLYMER PROCESSING (2017)
Monitoring and dynamic control of quality stability for injection molding process
Xundao Zhou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Iterative learning fault-tolerant control for injection molding processes against actuator faults
Limin Wang et al.
JOURNAL OF PROCESS CONTROL (2017)
Simulation of mechanical behavior and optimization of simulated injection molding process for PLA based antibacterial composite and nanocomposite bone screws using central composite design
Behzad Shiroud Heidari et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Optimization and analysis of reaction injection molding of polydicyclopentadiene using response surface methodology
Hyeon-Gook Kim et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2017)
PREDICTIVE MODEL AND OPTIMIZATION OF PROCESSING PARAMETERS FOR PLASTIC INJECTION MOULDING
Davorin Kramar et al.
MATERIALI IN TEHNOLOGIJE (2017)
Multiobjective Optimization of Injection Molding Process Parameters for the Precision Manufacturing of Plastic Optical Lens
Junhui Liu et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2017)
Ultrasound-based measurement of liquid-layer thickness: A novel time-domain approach
Bernhard Praher et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)
Processing optimization of Fresnel lenses manufacturing in the injection molding considering birefringence effect
Chao-Ming Lin et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2017)
An evaluation of the melt crystallisation behaviour of injection-moulded high-density polyethylene (HDPE) based on a solidification kinetics analysis
Bin Yang et al.
PLASTICS RUBBER AND COMPOSITES (2017)
Combined effect of nucleating agent and plasticizer on the crystallization behaviour of polylactide
Jon Anakabe et al.
POLYMER BULLETIN (2017)
Melt processing and mechanical property characterization of high-performance poly(ether ether ketone)-carbon nanotube composite
Marianna Rinaldi et al.
POLYMER INTERNATIONAL (2017)
Optimization of tensile properties of injection molded α-nucleated polypropylene using response surface methodology
S. J. A. Rizvi et al.
POLYMER TESTING (2017)
Insight into understanding the evolution of the epitaxy crystallization in isotactic polypropylene and polyethylene blends
Man Zhou et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Novel design of extension nozzle and its application on real-time injection molding process diagnosed by ultrasound
Yi-Lin Wu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
Screening and optimization of highly effective ultrasound-assisted simultaneous adsorption of cationic dyes onto Mn-doped Fe3O4-nanoparticle-loaded activated carbon
Arash Asfaram et al.
ULTRASONICS SONOCHEMISTRY (2017)
Pressure Analysis of Dynamic Injection Molding and Process Parameter Optimization for Reducing Warpage of Injection Molded Products
Xinyu Wang et al.
POLYMERS (2017)
Analysis of the shrinkage of injection-molded fiber-reinforced thin-wall parts
Davide Masato et al.
MATERIALS & DESIGN (2017)
Optimization of fiber-orientation distribution in fiber-reinforced composite injection molding by Taguchi, back propagation neural network, and genetic algorithm-particle swarm optimization
Kun Li et al.
ADVANCES IN MECHANICAL ENGINEERING (2017)
Flow visualization and simulation of the filling process during injection molding
Patrick Guerrier et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2017)
Effect of injection molding parameters on crystallinity and mechanical properties of isotactic polypropylene
S. J. A. Rizvi
INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY (2017)
Effect of Process Parameters on Cavity Pressure in Injection Molding
Quan Wang et al.
ADVANCES IN MATERIALS, MACHINERY, ELECTRONICS I (2017)
Self-optimizing injection molding based on iterative learning cavity pressure control
Ch. Hopmann et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2017)
Implementation of Multimodel-Based PID and Intelligent Controller for Simulated and Real-Time Temperature Control of Injection Molding Machine
S. Kanagalakshmi et al.
CHEMICAL ENGINEERING COMMUNICATIONS (2016)
Multiobjective optimization of injection molding process parameters based on Opt LHD, EBFNN, and MOPSO
Junhong Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Optimization of the plastic injection molding process using the Taguchi method, RSM, and hybrid GA-PSO
Wen-Chin Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Three-dimensional numerical modeling of an induction heated injection molding tool with flow visualization
Patrick Guerrier et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
A statistical quality monitoring method for plastic injection molding using machine built-in sensors
Yun Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
A self-optimising injection moulding process with model-based control system parameterisation
Christian Hopmann et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2016)
Sisal-glass fiber hybrid biocomposite: Optimization of injection molding parameters using Taguchi method for reducing shrinkage
B. Kc et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Development of a rapid surface temperature variation system and application to micro-injection molding
Felice De Santis et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Warpage and Shrinkage Optimization of Injection-Molded Plastic Spoon Parts for Biodegradable Polymers Using Taguchi, ANOVA and Artificial Neural Network Methods
Erfan Oliaei et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Metamodel-based design optimization of injection molding process variables and gates of an automotive glove box for enhancing its quality
Gyung-Ju Kang et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Tilted Magnetic Levitation Enables Measurement of the Complete Range of Densities of Materials with Low Magnetic Permeability
Alex Nemiroski et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Optimization of Injection Molding Parameters for HDPE/TiO2 Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis
Hifsa Pervez et al.
MATERIALS (2016)
Optimization of an Injection Molding Process for Polycarbonate Car Switch Buttons Using the Taguchi Method
Cheol Kim et al.
COMPOSITES RESEARCH (2016)
Overcoming the Fundamental Challenges in Improving the Impact Strength and Crystallinity of PLA Biocomposites: Influence of Nucleating Agent and Mold Temperature
Vidhya Nagarajan et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Using Magnetic Levitation for Non-Destructive Quality Control of Plastic Parts
Jonathan W. Hennek et al.
ADVANCED MATERIALS (2015)
A principal component analysis model-based predictive controller for controlling part warpage in plastic injection molding
Songtao Zhang et al.
EXPERT SYSTEMS WITH APPLICATIONS (2015)
An Iterative Modeling and Trust-Region Optimization Method for Batch Processes
Jinjin Zhao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Application of Two-Dimensional Predictive Functional Control in Injection Molding
Bo Yang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Two-Time-Dimensional Model Predictive Control of Weld Line Positioning in Bi-Injection Molding
Zhixing Cao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Quality control using a multivariate injection molding sensor
Guthrie Gordon et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Correlation between runner pressure and cavity pressure within injection mold
Kuo-Ming Tsai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Multi-objective optimization design of injection molding process parameters based on the improved efficient global optimization algorithm and non-dominated sorting-based genetic algorithm
Jian Zhao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Estimation of Bulk Melt-Temperature from In-Mold Thermal Sensors for Injection Molding, Part A: Method
S. P. Johnston et al.
INTERNATIONAL POLYMER PROCESSING (2015)
Optimized Digital Proportional Integral Derivative Controller for Heating and Cooling Injection Molding System
Byeong-Ho Jeong et al.
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY (2015)
Online quality optimization of the injection molding process via digital image processing and model-free optimization
Yi Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Measurement of fiber orientation distribution in injection-molded short-glass-fiber composites using X-ray computed tomography
Thanh Binh Nguyen Thi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Crystallization Measurements via Ultrasonic Velocity: Study of Poly(lactic acid) Parts
Peng Zhao et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2015)
Dimensional accuracy optimization of the micro-plastic injection molding process using the Taguchi design method
Chil-Chyuan KUO KUO et al.
Materials Science-Medziagotyra (2015)
Multiobjective Design of Turbo Injection Mode for Axial Flux Motor in Plastic Injection Molding Machine by Particle Swarm Optimization
Jian-Long Kuo et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2015)
Thermorheological and mechanical properties of cellulose reinforced PLA bio-composites
A. Awal et al.
MECHANICS OF MATERIALS (2015)
Human-level control through deep reinforcement learning
Volodymyr Mnih et al.
NATURE (2015)
On-Line Multivariate Optimization of Injection Molding
Stephen Johnston et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Measuring mechanical stresses on inserts during injection molding
Martina Heinle et al.
ADVANCES IN MECHANICAL ENGINEERING (2015)
Multiobjective optimization of process parameters for plastic injection molding via soft computing and grey correlation analysis
Gang Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Optimization of injection molding process parameters to improve the mechanical performance of polymer product against impact
Yingjie Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Warpage optimization with dynamic injection molding technology and sequential optimization method
Xinyu Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Optimization and Numerical Simulation Analysis for Molded Thin-Walled Parts Fabricated Using Wood-Filled Polypropylene Composites via Plastic Injection Molding
M. D. Azaman et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Detection Method of Filling Imbalance in a Multi-Cavity Mold for Small Lens
Jin-Su Gim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Controlling Process Parameters during Plastication in Plastic Injection Molding Using Model Predictive Control
R. Dubay et al.
ADVANCES IN POLYMER TECHNOLOGY (2014)
Iterative learning control of a plastic injection moulding machine
Dominik Dorner et al.
AT-AUTOMATISIERUNGSTECHNIK (2014)
GA based predictive functional control for batch processes under actuator faults
Ridong Zhang et al.
CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2014)
Optimization of processing parameters for minimizing warpage of large thin-walled parts in whole stages of injection molding
Tong Wen et al.
CHINESE JOURNAL OF POLYMER SCIENCE (2014)
Online product quality monitoring through in-process measurement
Robert X. Gao et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
Industrial applications of computed tomography
L. De Chiffre et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
Model-Free Quality Optimization Strategy for a Batch Process with Short Cycle Time and Low Operational Cost
Shengqiang Zhu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Predictive Functional Control for Linear Systems under Partial Actuator Faults and Application on an Injection Molding Batch Process
Ridong Zhang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
An integrated parameter optimization system for MIMO plastic injection molding using soft computing
Wen-Chin Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Warpage reduction with variable pressure profile in plastic injection molding via sequential approximate optimization
Satoshi Kitayama et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Minimization of sink mark depth in injection-molded thermoplastic through design of experiments and genetic algorithm
Wei Guo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
A nondestructive online method for monitoring the injection molding process by collecting and analyzing machine running data
Peng Zhao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Development and evaluation of a new rapid mold heating and cooling method for rapid heat cycle molding
Guilong Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Verifying the Melting Behavior in Single-Screw Plasticization Units Using a Novel Simulation Model and Experimental Method
M. Aigner et al.
INTERNATIONAL POLYMER PROCESSING (2014)
Offline Prediction of Process Windows for Robust Injection Molding
Shengrui Yu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
State space model predictive fault-tolerant control for batch processes with partial actuator failure
Ridong Zhang et al.
JOURNAL OF PROCESS CONTROL (2014)
Model predictive control of servo motor driven constant pump hydraulic system in injection molding process based on neurodynamic optimization
Yong-gang Peng et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE C-COMPUTERS & ELECTRONICS (2014)
Improvement of mechanical properties of recycled plastic blends via optimizing processing parameters using the Taguchi method and principal component analysis
Fu Gu et al.
MATERIALS & DESIGN (2014)
Heating/cooling channels design for an automotive interior part and its evaluation in rapid heat cycle molding
Gui-long Wang et al.
MATERIALS & DESIGN (2014)
Optimization of plastic injection molding process parameters for manufacturing a brake booster valve body
Yi-qi Wang et al.
MATERIALS & DESIGN (2014)
Experimental study of crystallization of PolyEtherEtherKetone (PEEK) over a large temperature range using a nano-calorimeter
Xavier Tardif et al.
POLYMER TESTING (2014)
Noncontact orientation of objects in three-dimensional space using magnetic levitation
Anand Bala Subramaniam et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
Multi-objective optimization of volume shrinkage and clamping force for plastic injection molding via sequential approximate optimization
Satoshi Kitayama et al.
SIMULATION MODELLING PRACTICE AND THEORY (2014)
Integrating the Taguchi Method and Response Surface Methodology for Process Parameter Optimization of the Injection Molding
Yung-Tsan Jou et al.
APPLIED MATHEMATICS & INFORMATION SCIENCES (2014)
Shrinkage and Warpage Detailed Analysis and Optimization for the Injection Molding Process Using Multistage Experimental Design
Mahmoud A. Barghash et al.
QUALITY ENGINEERING (2014)
Ultrasound based monitoring of the injection moulding process - methods, applications and limitations
B. Praher et al.
PROCEEDINGS OF PPS-29: THE 29TH INTERNATIONAL CONFERENCE OF THE POLYMER - CONFERENCE PAPERS (2014)
Optimization of injection molding process for car fender in consideration of energy efficiency and product quality
Hong Seok Park et al.
JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2014)
Process Parameters Optimization for Multiple Quality Characteristics in Plastic Injection Molding using Taguchi Method, BPNN, GA, and Hybrid PSO-GA
Wen-Chin Chen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)
Using Magnetic Levitation to Separate Mixtures of Crystal Polymorphs
Manza B. J. Atkinson et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
An LMI Method to Robust Iterative Learning Fault-tolerant Guaranteed Cost Control for Batch Processes
Wang Limin et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2013)
Delay-Range-Dependent Method for Iterative Learning Fault-Tolerant Guaranteed Cost Control for Batch Processes
Limin Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
An experimental work on the effect of injection molding parameters on the cavity pressure and product weight
Hamdy Hassan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
A Proposed Technique to Acquire Cavity Pressure Using a Surface Strain Sensor During Injection-Compression Molding
Wei-Sheng Guan et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Delay-range-dependent robust 2D iterative learning control for batch processes with state delay and uncertainties
Limin Wang et al.
JOURNAL OF PROCESS CONTROL (2013)
An ultrasound-based system for temperature distribution measurements in injection moulding: system design, simulations and off-line test measurements in water
Bernhard Praher et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2013)
Non-destructive measurement of cavity pressure during injection molding process based on ultrasonic technology and Gaussian process
Peng Zhao et al.
POLYMER TESTING (2013)
Real-time diagnosing polymer processing in injection molding using ultrasound
Lijuan Zhao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Robust delay dependent iterative learning fault-tolerant control for batch processes with state delay and actuator failures
Limin Wang et al.
JOURNAL OF PROCESS CONTROL (2012)
Computed tomography for dimensional metrology
J. P. Kruth et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
An enhanced optimization approach based on Gaussian process surrogate model for process control in injection molding
Wei Xia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Robust design of feedback integrated with iterative learning control for batch processes with uncertainties and interval time-varying delays
Limin Wang et al.
JOURNAL OF PROCESS CONTROL (2011)
Automated process parameters tuning for an injection moulding machine with soft computing
Peng Zhao et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2011)
Optimization of injection molding process parameters using integrated artificial neural network model and expected improvement function method
Huizhuo Shi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Simultaneous determination of the coating thickness and its longitudinal velocity by ultrasonic nondestructive method
Y. Zhao et al.
NDT & E INTERNATIONAL (2010)
Development of a Rheo-Dielectric Sensor for Online Shear Stress Measurement During the Injection Molding Process
Yiyan Peng et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Automatic Velocity Profile Determination for Uniform Filling in Injection Molding
Xi Chen et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Measuring Densities of Solids and Liquids Using Magnetic Levitation: Fundamentals
Katherine A. Mirica et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
A Real-Time Process Optimization System for Injection Molding
Dequn Li et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Polymer Characterization by Ultrasonic Wave Propagation
Francesca Lionetto et al.
ADVANCES IN POLYMER TECHNOLOGY (2008)
Using Magnetic Levitation To Distinguish Atomic-Level Differences in Chemical Composition of Polymers, and To Monitor Chemical Reactions on Solid Supports
Katherine A. Mirica et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Application of the ultrasonic pulse-echo technique for quality control of the multi-layered plastic materials
Renaldas Raisutis et al.
NDT & E INTERNATIONAL (2008)
Development of a transducer for in-line and through cycle monitoring of key process and quality variables in injection molding
Ho Yin Wong et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
An integrated intelligent system for injection molding process determination
Huamin Zhou et al.
ADVANCES IN POLYMER TECHNOLOGY (2007)
Real-time diagnosis of co-injection molding using ultrasound
Chin-Chi Cheng et al.
POLYMER ENGINEERING AND SCIENCE (2007)
Density-based diamagnetic separation: Devices for detecting binding events and for collecting unlabeled diamagnetic particles in paramagnetic solutions
Adam Winkleman et al.
ANALYTICAL CHEMISTRY (2007)
Real time diagnostics of gas/water assisted injection moulding using integrated ultrasonic sensors
L. Mulvaney-Johnson et al.
PLASTICS RUBBER AND COMPOSITES (2007)
Application of a capacitive transducer for online part weight prediction and fault detection in injection molding
Ka Tsai Fung et al.
POLYMER ENGINEERING AND SCIENCE (2007)
Real-time process monitoring of micromoulding using integrated ultrasonic sensors
Y. Ono et al.
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL (2007)
Ultrasonic measurement of orientation in HDPE/iPP blends obtained by dynamic packing injection molding
BB He et al.
POLYMER (2006)
Fast determination of phase inversion in polymer blends using ultrasonic technique
BB He et al.
POLYMER (2005)
Ultrasonic investigations of the thermoplastics injection moulding process
W Michaeli et al.
POLYMER TESTING (2005)
A review of current developments in process and quality control for injection molding
ZB Chen et al.
ADVANCES IN POLYMER TECHNOLOGY (2005)
Capacitive transducer for in-mold monitoring of injection molding
X Chen et al.
POLYMER ENGINEERING AND SCIENCE (2004)
Interdigital sensors and transducers
AV Mamishev et al.
PROCEEDINGS OF THE IEEE (2004)
Electrostrictive response of an ideal polar rubber
T Yamwong et al.
JOURNAL OF APPLIED PHYSICS (2002)
Adaptive control of the filling velocity of thermoplastics injection molding
Y Yang et al.
CONTROL ENGINEERING PRACTICE (2000)