Photocatalytic degradation of trimethoprim using S-TiO2 and Ru/WO3/ZrO2 immobilized on reusable fixed plates

In this study, photocatalytic degradation of trimethoprim by synthesized S-TiO2 and Ru/WO3/ZrO2 catalysts was investigated. Both photocatalysts have been immobilized on circular aluminum plates by polysiloxane to investigate their reusability performance. The morphology and structure of the catalysts were studied by high-resolution transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy. The photocatalytic experiments were carried out using suspended and attached catalysts using a metal halide lamp as a light source. The degradation efficiencies of trimethoprim were 100% and 98.2% at catalyst dose of 0.5 g/L, pH of 7.0 and irradiation time of 240 min using suspended Ru/WO3/ZrO2 and S-TiO2, respectively. After immobilization of the catalysts on the aluminum plates, the removal efficiencies in five repetitive cycles were 98%, 96.9%, 96.8%, 93.2% and 83.4% using Ru/WO3/ZrO2, while they were 88.6%, 86%, 84%, 78% and 75.9% in case of S-TiO2. The irradiation time of each cycle was 240 min, and the initial trimethoprim concentration was 10 mg/L. The degradation rates of trimethoprim were estimated in the case of suspended and immobilized STiO2 and Ru/WO3/ZrO2. The radical trapping experiments using various scavengers revealed that superoxide radicals, holes and hydroxyl radicals all participated in the photo-degradation process. Furthermore, the transformation products generated during the trimethoprim oxidation process were detected by liquid chromatography/mass spectroscopy to identify the possible degradation pathways.